Gima UNIVERSAL TRAY for commode User guide

Page 1
Tray with universal base VCA 060
Cod. 90120060
Qualifying Product
VAIMAS SRL
Via Volpato, 39 36035 Marano Vicentino VI
Direttiva 93/42 CEE
Ausili Medici Classe I
Rev. 1,1
Page 2
DESCRIPTION COMPONENTS
Remove the item from the packaging and check for all components
A - Universal tray B - 2 steps to insert C - 4 screws 5x35 + 4 screws 5x38 (for wood) 2 attachments with nut + 2 attachments 2 Wing nut
ASSEMBLY INSTRUCTIONS
Begin by loosening grains using a 5 mm wrench; Thread the two rods on the sides. DO NOT TILT THE GRANTS until assembly is complete.
Attach the brackets underneath the comfortable armrest, using type A screws in the case of commoda VAIMAS, type B screws in the case of a wooden armrest. The attachement for the wing nut must be positioned at the front of commoda.
VAIMAS SRL Via Volpato, 39 36035 Marano Vicentino VI Rev 1,1
Page 3
Depth
68 cm
Width
72 cm
Overall size
9 cm
Weight of the universal tray
4,5 Kg
Maximum sustainable weight
20 Kg
Adjust the width of the two rods to that of the armrests and proceed by inserting the tray by sliding the rods into the joints.
Secure the rods by tightening the wing nut. Finally, tighten the grains, after assembly is
complete.
TECHNICAL DATA
CLEANING
It is recommended to use common, non-abrasive and non-corrosive detergents on the surface of the shore by passing a damp cloth on the surfaces and drying immediately.
DEMOLITION AND DISPOSAL
If disassembled, disassemble the various components by grouping them by type of material, then dispose of them in accordance with current regulations.
WARRANTY
The warranty covers the period of TWO years from the date of purchase confirmed by the tax receipt and covers any defects in materials and workmanship that may be present before delivery. Any faults or faults found must be promptly communicated to your distributor or area agent. At its sole discretion, Vaimas Srl may act by repairing the defect or replacement of parts or items.
VAIMAS SRL Via Volpato, 39 36035 Marano Vicentino VI Rev 1,1
Loading...