Page 1
CARRELLO REX
REX TROLLEY
MANUALE D’USO – USER MANUAL
27439
Distribuito da / distributed by:
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
gima@gimaitaly.com - export@gimaitaly.com
www.gimaitaly.com
Made in Italy
M27439-M-Rev.3-12.22
Page 2
7
ENGLISH
INTRODUCTION
You should carefully read this manual before using this medical device
DESCRIPTION
This product is a medication trolley for hospital use, entirely made of stainless steel with 3 shelves
equipped with waste basket and bottle holder. Suitable for dressing in hospitals, clinics and doctor’s
surgeries.
N.2 CURVED LEGS
SHELD WITH DRAWER
CENTRAL SHELF WITH
RAILS
COMPONENTS:
N.2 Curved legs
N. 2 wheels Ø 100 mm without brakes
WASTE BIN
SHELF WITH GUARD RAILS
AND HOLES FOR WASTE BIN
N. 2 wheels Ø 100 mm with brakes
N.1 shelf with drawer and support for bottles
Page 3
ENGLISH
ASSEMBLY MATERIAL:
8 TBE 8X35 (shelf with drawer and support for bottles)
8 washers M8 (shelf with drawer and support for bottles)
4 TSPE 6X18 (for waste bin)
4 nut M6 (for waste bin)
8
4 washers M6 (for waste bin)
1 key M6M10
1 allen key ø 4
1 allen key ø 5
1 allen key ø 8 (for wheels)
ASSEMBLY INSTRUCTION
Prepare a sufficiently large shelf to work on.
Take one leg and the upper shelf with drawer and place it on a work surface.
Take a leg and put together a side of the shelf with n. 4 TBE 8x35 screws supplied.
Page 4
9
ENGLISH
Unscrew the screws that keep the central
Restart to fix the central shelf to the leg.
shelf to the beam.
Unscrew the screws that keep the third shelf to the beam and restart to fix it to the leg.
One side is completed, proceed in the same way with the second leg.
Page 5
ENGLISH
By pressing the pedal lever, tilt the basket backwards and remove it.
10
Insert n.4 TSPE 6x18 screws on the bottom of the shelf and keep relative washer and nut to fix the
basket to the shelf.
Insert the wheels with brake (drawer side) and insert one by one into the leg tube terminal.
Finally, take the Allen key and wrench and screw it in until finished.
Page 6
11
TECHNICAL DATA:
Measurement
ENGLISH
Maximum dimension cm 83 x 51,5 x 119,5 h
Trash bin capacity 26 L external container: cm 33,3x25x43h internal container:
cm 25x30x41 pedal: cm 33x8
Box cm 114 x 54 x 39
Weight
Max capacity
33 kg (with box 36,7 kg)
15 kg/shelf
WARNINGS!
- Fasten the screws with the allen key supplied.
- Check the locking nuts are tightened.
- Observe the maximum flow rates indicated in the data sheets.
- Avoid direct contact with open wounds.
- Not for use in open environments.
MAINTENANCE AND CLEANING
- Use only original spare parts.
- Periodically check all fixing points.
- To preserve at best, it is recommended to avoid prolonged exposure to sunlight, to contact and deposit
in saline and very humid environments.
- Wash the stainless steel surfaces with soapy water and use appropriate disinfectants.
- Rinse with a damp cloth and dry thoroughly.
- Do not spill on the surface cleaners containing chlorine or ammonia, fatty and oily substances.
- Do not use cleaning utensils containing iron. If necessary disinfection only use suitable non-corrosive
products.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
Loading...