Gima MULTI-FUNCTION FOREHEAD THERMOMETER User guide

TERMOMETRO FRONTALE
FOREHEAD THERMOMETER
THERMOMÈTRE FRONTAL
STIRNTHERMOMETER
TERMÓMETRO FRONTAL
TERMÔMETRO FRONTAL

ИЕСМПМЕФСП МЕФЩРПХ

ﻲﻨﻴﺒﺠﻟا ةراﺮﺤﻟا ناﺰﻴﻣGIMA

Gima S.p.A.

Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]

www.gimaitaly.com

MANUALE D’USO E MANUTENZIONE

USE AND MAINTENANCE BOOK

INSTRUCTIONS DE FONCIONNEMENT ET ENTRETIEN

BETRIEBS UND WARTUNGS ANWEISUNGEN

MANUAL DE USO Y MANTENIMIENTO

MANUAL DE USO E MANUTENÇÃO

ЕГЧЕЙСЙДЙП ЧСЗУЗУ КБЙ УХНФЗСЗУЗУ

ª¦BkZ{A¥ |B}lKaÂA |¦{X

ATTENZIONE: Gli operatori devono leggere e capire completamente questo manuale
prima di utilizzare il prodotto.
ATTENTION: The operators must carefully read and completely understand the present
manual before using the product.

AVIS: Les opérateurs doivent lire et bien comprendre ce manuel avant d’utiliser le produit.
ACHTUNG: Die Bediener müssen vorher dieses Handbuch gelesen und verstanden haben,

bevor sie das Produkt benutzen.
ATENCIÓN: Los operadores tienen que leer y entender completamente este manual antes
de utilizar el producto.
ATENÇÃO: Os operadores devem ler e entender completamente este manual antes de
usar o produto.

РСПУПЧЗ: Пй чейсйуфЭт бхфпэ фпх рспъьнфпт рсЭрей нб дйбвЬупхн кбй нб кбфблЬвпхн
рлЮсщт фйт пдзгЯет фпх егчейсйдЯпх рсйн брь фзн чсЮуз фпх.

.PK}{A |B}lKaBI XI{A |Iv £{}ByI |¦{X{A AY¡ ~¢s¥ ©AZv |B}l{A «{k :ZYR{A

25585

Gima S.p.A. - Via Marconi, 1
20060 Gessate (MI) - Italy
Made in China

M25585-M-Rev.6.12.18

0476

7

FEATURES

The GIMA forehead thermometer was designed with advanced infra-red technologies and room temperature
compensation technology for immediate and accurate measurements.

ENGLISH

Do not use this device in situations of vital importance or for applications concerning safety.

Specifications
Temperature measurement range: Forehead mode: 34~42.2°C (
Operating temperature range: 10~40°C (50~104°F)
Storage temperature range: -20~50°C (-4~122°F), RH 85%

Transportation temperature shall be less than 70°C, RH 95%
Accuracy: For Forehead mode: +/-0.2°C (0.4°F) during 35~42°C (95~107.6°F),+/-0.3°C (0.5°F) for other range.

For scan mode: +/-0.3°C (0.5°F) during 22~42.2°C (71.6~108°F), for other range +/-4% or +/-2°C (4°F)
whichever is greater.

Battery: one lithium battery (CR2032)

FUNCTION

93.2~108°F), Scan mode: -22~80°C (-7.6~176°F)

Before each use make sure the probe is clean and without damage.

Press ON/MEM button. The thermometer is ready for use after you hear two beep sounds.

Setting date and time

Correctly setting the clock will assure a proper interpretation of the stored
measurements.

Press and hold the ON/MEM button for 5 seconds. When the Set icon starts to flash, it indicates that you
are in the setting screen. Use the ON/MEM button to scroll the 12/24 hour settings, the year, month and
date. Use the SCAN button to set the clock.

Choosing between Fahrenheit and Celsius

To change the unit of measure of the temperature between °C and °F, press and hold the
SCAN button with device switched off, then press and release the ON/MEM button until the
display shows the symbol °F or °C. Repeat the procedure to change the unit of measure again.

Note: holding the thermometer too long may cause a higher ambient temperature
reading of the probe. This could make the body temperature measurement
lower than usual.

Forehead temperature measuring

Make sure the probe lens and the forehead are clean and dry.

1) Press the ON/MEM button. After you hear two beep sounds and the icon
appears, the thermometer is ready for use.

2) Approach the thermometer to your temple(within 1cm), analyzing the area
shown in the figure.

3) Press the SCAN button and detect the value at close range around the
temple, with a very slow twisting motion.. While scanning, you will hear a
beep sound, which indicates the newest measurement is taking place.
Measurement has been completed after two short beeps are heard, after

5-30 seconds from the beginning of the measurement. The temperature
is now shown on the display. This is just an indication of the temperature
and determines only whether there is a temperature or not.

ENGLISH

Fever alarm

If thermometer detects a body temperature greater than 37.5° C there will be a long beep
sound followed by three short beep sounds.

Temperature level colored LED indicator

If the thermometer measures a body temperature lower than 37.5 ° C, the led will be green,
If the temperature is greater than 37.5 ° C and 38.0 ° C, the led will be yellow, if the
temperature is > = 38.0 ° C, the led will be red.

Measuring temperature under Scan mode

This mode is not suitable for the measurement of human body temperature.

Scan mode measures the temperature of objects and liquids (for example milk or bath water). After switching
on the device, press and hold the ON/MEM button, and press SCAN once until the LCD display shows the
icon for “infrared thermometer” mode. In this mode it is possible to measure the surface temperature of
objects and liquids.
If you press and hold the “SCAN” button, the reading of measurement will be continuously updated.

After measurement

Device will automatically shut off if left idle for more than 1 minute to extend battery life. The
LCD will only show the date, time and room temperature in stand-by mode. For an
accurate measurement of room temperature, the thermometer should be placed on a table,
far from elements that can affect the measurement. Wait approx. 15 minutes.

Memorizing temperatures

The memory function can be used to show the last 9 measurements with date, time,
temperature and mode. Press the ON/MEM button when power is on to see the temperatures
stored.

8

Stop watch

After switching on the thermometer, press and hold the ON/MEM button and press the
SCAN button twice for stop watch mode to see the icon appear. In this mode you can count
by 0.01 seconds to three minutes. To start or stop the count press the SCAN button. To set
count to zero press the ON/MEM button. To exit function press and hold the ON/MEM
button and press the SCAN button.

WARNINGS

- Temperature can be influenced by several external factors; variation between one measurement
and the other are normal.

- Before the measurement, please stay in a stable environment for 5 mins.

- Avoid bath or exercise before measuring body temperature; keep the measurement area
clean and dry, free from cosmetics or creams

- During measurement avoid direct exposure to sun, rain or wind; do not measure near heat
sources or in excessively humid places.

- Always keep device at a temperature between -20 and 50°C (-4 and122°F), in a dry place
away from liquids and direct sunlight.

- in case of extraordinary maintenance interventions, contact the nearest retailer.

9

TROUBLESHOOTING

Error
Message

Problem

ENGLISH

Solution

Error 5~9, the system is not functioning
properly.

Measurement before device stabilization.

The device shows a rapid ambient
temperature change.

The ambient temperature is not within the
range between 10°C and 40°C (50°F ~104°F).

Forehead: Temperature taken is higher
than +42.2°C (108°F). Scan: Temperature
taken is higher than +80°C (176°F)

Forehead: Temperature taken is lower
than +34°C (93.2°F). Scan: Temperature
taken is lower than -22°C (-7.6°F)

LCD display cannot be powered on to the
ready stage.

MAINTENANCE

Care and cleaning

Remove the battery, wait for 1 minute and
repower it. If the message reappears, contact
the retailer for service.

Wait until all the icons stops flashing.

Allow the thermometer to rest in a room for
at least 30 minutes at room temperature:
10°C and 40°C (50°F ~104°F).

Please select the target within specifications.
If a malfunction still exists, please contact
the nearest retailer.

Change with a new battery.

The probe is the most delicate part of the thermometer. Use with care when cleaning the probe
to avoid damage.

Delicately clean the lens with a cotton cloth (soft cloth) moistened with water or 70% alcohol and allow the
probe to fully dry. Clean probe after each use to assure accurate reading and avoid crossed contamination.
Put on lid when not using the thermometer.

Battery replacement

The device is supplied with one lithium battery (CR2032 x 1); don’t forget to switch it off before changing the
battery (see illustration). The positive (+) side of the battery must face up. Keep the battery away from
children.

Disposal: The product must not be disposed of along with other domestic waste. The users
must dispose of this equipment by bringing it to a specific recycling point for electric and
electronic equipment.
For further information on recycling points contact the local authorities, the local recycling
center or the shop where the product was purchased. If the equipment is not disposed of
correctly, fines or penalties may be applied in accordance with the national legislation and
regulations.

GIMA WARRANTY CONDITIONS

Congratulations for purchasing a GIMA product.
This product meets high qualitative standards both as regards the material and the production. The warranty
is valid for 12 months from the date of supply of GIMA.
During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the defected

ENGLISH

parts due to production reasons. Labor costs and personnel traveling expenses and packaging not included.
All components subject to wear are not included in the warranty.
The repair or replacement performed during the warranty period shall not extend the warranty.
The warranty is void in the following cases: repairs performed by unauthorized personnel or with non-original
spare parts, defects caused by negligence or incorrect use.
GIMA cannot be held responsible for malfunctioning on electronic devices or software due to outside agents
such as: voltage changes, electro-magnetic fields, radio interferences, etc.
The warranty is void if the above regulations are not observed and if the serial code (if available) has been
removed, cancelled or changed.
The defected products must be returned only to the dealer the product was purchased from. Products sent
to GIMA will be rejected.

10

36