Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
gima@gimaitaly.com - export@gimaitaly.com
PROFESSIONAL MEDICAL PRODUCTS
www.gimaitaly.com
JOLLY DIGITAL BLOOD PRESSURE MONITOR
Operation Guide
SPECIFICATIONS
1. Product name: Arm Blood Pressure Monitor
2. Model: 32777 / KD-5920
3. Classication: Internally powered, Type BF applied part, IP20, No AP
or APG, Continuous operation
4. Machine size:
5. Cuff circumference: 22-30 cm (8-11”), 30-42 cm (11-16”) optional,
42-48 cm (16-18.2”) optional
6. Weight: Approx. 235 g (8 9/32 oz.) (exclude batteries)
7. Measuring method: Oscillometric method, automatic ination and measurement
8. Memory volume: 4×30 times with time and date stamp
9. Power source: batteries: 4×1.5 V SIZE AAA
10. Measurement range:
Cuff pressure: 0-300 mmHg
Systolic: 60-260 mmHg
Diastolic: 40-199 mmHg
Pulse rate: 40-180 beats/minute
11. Accuracy:
Pressure: ±3 mmHg
Pulse rate: Less than 60: ±3bpm
More than 60 (incl.) : ±5%
precision of the displayed values: 1mmHg
Approx.150 mm × 95 mm × 41 mm (5 29/32” x 3 3/4” x 1 5/8”)
7
Avoid the battery uid to get in your eyes. If it should get in your eyes, immediately rinse with plenty of clean water and contact a physician.
The negative terminal of the battery needs to be compressed into the battery compartment properly after horizontal compression of the negative
electrode. The battery is in contact with the spring.
Make sure the battery cover is intact and not damaged before installing
the battery.
The monitor, the batteries and the cuff, must be disposed of according to
local regulations at the end of their usage.
13
2. Clock and date adjustment
a. Once you insert the battery, the Blood Pressure Monitor will enter Clock and
Date Adjustment Mode.
b. If the time of the device is already set and need to be changed, adjustment
can be reached by pressing both the “START” and “MEM” button for 2 seconds in Standby Mode.
c. In Clock and Date Adjustment Mode , the time format will blink at rst. Press
the button “MEM” can change time format. Press the button “START” repeatedly, the year, month, day, hour and minute will blink in turn. While the number
IMPORTANT INFORMATION .............................................................................3
CONTENTS AND DISPLAY INDICATORS .........................................................4
INTENDED USE .................................................................................................5
CONTRAINDICATION ........................................................................................5
PACKAGE CONTENTS .....................................................................................5
PRODUCT DESCRIPTION.................................................................................6
SPECIFICATIONS ..............................................................................................7
NOTICE .............................................................................................................8
SETUP AND OPERATING PROCEDURES ......................................................12
1. Battery loading ............................................................................................12
2. Clock and date adjustment .........................................................................13
3. Connecting the cuff to the monitor .............................................................15
4. Applying the cuff .........................................................................................16
5. Body posture during measurement .............................................................17
6. Taking your blood pressure reading ............................................................18
7. Displaying stored results .............................................................................20
8. Deleting measurements from the memory ..................................................22
9. Assessing high blood pressure for adults ...................................................22
10. Technical alarm description .......................................................................24
11. Troubleshooting (1) ....................................................................................25
12. Troubleshooting (2) ....................................................................................25
MAINTENANCE ...............................................................................................26
EXPLANATION OF SYMBOLS ON UNIT .........................................................28
ELECTROMAGNETIC COMPATIBILITY INFORMATION .................................30
WARRANTY INFORMATION ...........................................................................34
IMPORTANT INFORMATION
Normal blood pressure uctuation
All physical activity, excitement, stress, eating, drinking, smoking, body posture
and many other activities or factors (including taking a blood pressure measurement) will inuence blood pressure value. Because of this, it is mostly unusual to
obtain identical multiple blood pressure readings.
Blood pressure uctuates continually ----- day and night. The highest value usually appears in the daytime and lowest one usually at midnight. Typically, the
value begins to increase at around 3:00AM, and reaches to highest level in the
daytime while most people are awake and active.
Considering the above information, it is recommended that you measure your
blood pressure at approximately the same time each day.
Too frequent measurements may cause injury due to blood ow interference,
please always relax a minimum of 1 to 1.5 minutes between measurements to allow the blood circulation in your arm to recover. It is rare that you obtain identical
blood pressure readings each time.
2
12. Environmental temperature for operation: 10°C~40°C (50°F~104°F)
13. Environmental humidity for operation: ≤85% RH
14. Environmental temperature for storage and transport: -20°C~50°C
(-4°F~122°F)
15. Environmental humidity for storage and transport: ≤85% RH
16. Environmental pressure: 80kPa-105kPa
17. Battery life: Approx 100 times.
18. All components belonging to the pressure measuring system, including:
Pump, Valve, LCD, Cuff, Sensor
Note: These specications are subject to change without notice.
NOTICE
1. Read all of the information in the operation guide and any other literature
in the box before operating the unit.
2. Stay still, calm and rest for 5 minutes before blood pressure measurement.
3. The cuff should be placed at the same level as your heart.
4. During measurement, neither speak nor move your body and arm.
5. Measuring on same arm for each measurement.
6. Please always relax at least 1 or 1.5 minutes between measurements to allow
the blood circulation in your arm to recover. Prolonged over-ination (cuff
pressure exceed 300 mmHg or maintained above15 mmHg for longer than 3
minutes) of the bladder may cause ecchymoma of your arm.
3
7. Consult your physician if you have any doubt about below cases:
1) The application of the cuff over a wound or inammation diseases;
2) The application of the cuff on any limb where intravascular access
or therapy, or an arterio-venous (A-V) shunt, is present;
3) The application of the cuff on the arm on the side of a mastectomy or
lymph node clearance;
4) Simultaneously used with other monitoring medical equipments on the
same limb;
5) Need to check the blood circulation of the user.
8. This Electronic Sphygmomanometers is designed for adults and should
never be used on infants or young children. Consult your physician or
other health care professionals before use on older children.
9. Do not use this unit in a moving vehicle, This may result in erroneous measurement.
10. Blood pressure measurements determined by this monitor are equivalent
to those obtained by a trained observer using the cuff/stethoscope ausculta-
tion method, within the limits prescribed by the American National Standard
Institute, Electronic or automated sphygmomanometers.
11. Information regarding potential electromagnetic or other interference between the blood pressure monitor and other devices together with advice regarding avoidance of such interference please see part ELECTROMAGNETIC COMPATIBILITY INFORMATION. It is suggested that the blood pressure
monitor be kept at least 30 cm away from other wireless devices, such as
8
is blinking, press the button “MEM” to increase the number. Keep on pressing
the button “MEM”, the number will increase fast.
Picture 2-1 Picture 2-2 Picture 2-3 Picture 2-4 Picture 2-5 Picture 2-6
d. You can turn off the monitor by pressing “START” button when the minute is
blinking, then the time and date is conrmed.
e. The monitor will turn off automatically after 1 minute of no operation with the
time and date unchanged.
f. Once you change the batteries, you should readjust the time and date.
9
14
15
3. Connecting the cuff to the monitor
Insert the cuff tubing connector into the socket in the left side of the monitor.
Make certain that the connector is completely inserted to avoid air leakage during blood pressure measurements.
Avoid compression or restriction of the connection tubing during measurement, which may cause ination error, or harmful injury due to continuous
cuff pressure.
CONTENTS AND DISPLAY INDICATORS
Note: The pictures in the manual are for reference only.
INTENDED USE
Fully Automatic Electronic Sphygmomanometer is for use by medical professionals or at home and is a non-invasive blood pressure measurement system
intended to measure the diastolic and systolic blood pressures and pulse rate of
an adult individual by using a non-invasive technique in which an inatable cuff is
wrapped around the upper arm. The cuff circumference is limited to 22cm-48cm
(approx. 8-18.2”).
PACKAGE CONTENTS
1 Blood Pressure Monitor
1 Operation Guide
1 arm cuff 22-30cm (8-11’’)”
1 Soft Storage Case
4x1.5 AAA batteries
CONTRAINDICATION
It is inappropriate for people with serious arrhythmia to use this Electronic
Sphygmomanometer.
4
WLAN unit, microwave oven, etc. It can’t be used near active HF SURGICAL
EQUIPMENT and the RF shielded room of an ME SYSTEM for magneticresonance imaging, where the intensity of EM DISTURBANCES is high.
12. If Irregular Heartbeat (IHB) brought by common arrhythmias is detected in
the procedure of blood pressure measurement, a signal of will be displayed. Under this condition, the Electronic Sphygmomanometers can keep
function, but the results may not be accurate, it’s suggested that you consult
with your physician for accurate assessment.
There are 2 conditions under which the signal of IHB will be displayed:
1) The coefcient of variation (CV) of pulse period >25%.
2) The difference of adjacent pulse period≥0.14s, and the number of such
pulse takes more than 53 percentage of the total number of pulse.
13.
Please do not use the cuff other than supplied by the manufacturer, otherwise
it may bring biocompatible hazard and might result in measurement error.
14. The monitor might not meet its performance specications or cause
safety hazard if stored or used outside the specied temperature and
humidity ranges in specications.
15. Please do not share the cuff with other infective person to avoid
cross-infection.
16. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
5
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
17. Measurements are not possible in patients with a high frequency of arrhythmias.
18. The device is not intended for use on neonates, children or pregnant women.
(Clinical testing has not been conducted on neonates, children or pregnant
women.)
19. Motion, trembling, shivering may affect the measurement reading.
20. The device would not apply to the patients with poor peripheral circulation,
noticeably low blood pressure, or low body temperature (there will be low
blood ow to the measurement position).
21. The device would not apply to the patients who use an articial heart and
lung (there will be no pulse)
10
16
4. Applying the cuff
a. Pulling the cuff end through the medal loop (the
cuff is packaged like this already), turn it outward
(away from your body) and tighten it and close the
Velcro fastener. See picture 5-1.
b. Place the cuff around a bare arm 1-2cm above the
elbow joint.
c. If you place the cuff around left arm,position the
air tube in the middle of your arm in line with your
middle nger. See picture 5-2.
If you place the cuff around right arm, apply the
cuff so that the air tube is at the side of your el-
bow. See picture 5-3.
c. While seated, place palm upside in front of you on
a at surface such as a desk or table. Position the
air tube in the middle of your arm in line with your
middle nger.
d. The cuff should t comfortably, yet snugly around
your arm. You should be able to insert one nger
between your arm and the cuff.
11
Note:
1. Please refer to the cuff circumference range in “SPECIFICATIONS” to make
sure that the appropriate cuff is used.
2. Measuring on same arm each time.
3. Do not move your arm, body, or the monitor and do not move the rubber tube
during measurement.
4. Stay quiet, calm for 5 minutes before blood pressure measurement.
5. Please keep the cuff clean. If the cuff becomes dirty, remove it from the mon-
itor and clear it by hand in a mild detergent, then rinse it thoroughly in cold
water. Never dry the cuff in clothes dryer or iron it. Clean the cuff after the
usage of every 200 times is recommended.
6. Do not place the cuff around your arm if the arm has any inammation, acute
diseases, infections skin wounds.
Picture 5-1
Picture 5-2
Picture 5-3
17
5. Body posture during measurement
Sitting Comfortably Measurement
a. Be seated with your feet at on the oor, and don’t
cross your legs.
b. Place palm upside in front of you on a at surface
such as a desk or table.
c. The middle of the cuff should be at the level of the
right atrium of the heart.
PRODUCT DESCRIPTION
Based on Oscillometric methodology and silicon integrated pressure sensor,
blood pressure and pulse rate can be measured automatically and non-invasively. The LCD display will show blood pressure and pulse rate. The most recent
4X30 measurements can be stored in the memory with date and time stamp.
The voice function will ease the operation. The Electronic Sphygmomanometers corresponds to the below standards: IEC 60601-1Edition 3.1 2012-08/
EN 60601-1:2006/A1:2013 (Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance), IEC60601-1-2:2014/EN
60601-1-2:2015(Medical electrical equipment -- Part 1-2: General requirements
for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests), IEC80601-2-30:2009+AMD1:2013/
EN IEC80601-2-30:2019 (Medical electrical equipment –Part 2-30: Particular requirements for the basic safety and essential performance of automated
non-invasive sphygmomanometers) EN 1060-1: 1995 + A2: 2009 (Non-invasive
sphygmomanometers - Part 1: General requirements), EN 1060-3: 1997 + A2:
2009 (Non-invasive sphygmomanometers - Part 3: Supplementary requirements
for electro-mechanical blood pressure measuring systems); ISO81060-2:2013
(Non-Invasive Sphygmomanometers - Part 2: Clinical Validation Of Automated
Measurement Type).
6
22. Consult your physician before using the device for any of the following conditions: common arrhythmias such as atrial or ventricular premature beats or
atrial brillation, arterial sclerosis, poor perfusion, diabetes, pre-eclampsia,
renal diseases.
23. The patient is an intended operator.
24. Attention that changes or modication not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
25. Swallowing batteries and/or battery uid can be extremely dangerous. Keep
the batteries and the unit out of the reach of children and disabled persons.
26. If you are allergic to plastic/rubber, please don’t use this device.
12
Lying Down Measurement
a. Lie on your back.
b. Place your arm straight along your side with your
palm upside.
c. The cuff should be placed at the same level as
your heart.
18
6. Taking your blood pressure reading
a. After applying the cuff and your body is in a comfortable position, press the
“START” button. A beep is heard and all display characters are shown for selftest. See Picture 7-1. Please contact the service center if segment is missing.
SETUP AND OPERATING PROCEDURES
1. Battery loading
a. Open battery cover at the back of the monitor.
b. Load four “AAA” size batteries. Please pay attention to polarity.
c. Close the battery cover.
When LCD shows battery symbol , replace all batteries with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month or more to avoid
relevant damage of battery leakage.
Picture 7-1 Picture 7-2 Picture 7-3 Picture 7-4 Picture 7-5
b. Then the current memory bank (U1, U2, U3 or U4) is shown. See picture 7-2.
Press “MEM” button to change over to other bank. Conrm your selection by
pressing “START” button. The current bank can also be
conrmed automatically after 5 seconds with no operation.
c.
If the monitor has stored results, the LCD will momentarily display the most re-
cent one. If no result has been stored, zero will appear on LCD. See Picture 7-3.
d. If the voice function is switched on, the monitor will speak out measurement
tips.
e. Then the monitor starts to seek zero pressure. See picture 7-4.
f. Then the monitor inates the cuff until sufcient pressure has built up for a
measurement. Then the monitor slowly releases air from the cuff and carries
out the measurement. Finally the blood pressure and pulse rate will be c a l -
culated and displayed on the LCD screen. The blood pressure classication
indicator and Irregular heartbeat symbol (if any) will blink on the screen. The
result will be automatically stored in the monitor. See Picture 7-5.
g. After measurement, the monitor will turn off automatically after 1 minute of
no operation. Alternatively, you can press the “START” button to turn off the
monitor manually.
h. During measurement, you can press the “START” button to turn off the moni-
tor manually.
Note: Please consult a health care professional for interpretation of pressure
measurements.
19
11. Troubleshooting (1)
PROBLEM POSSIBLE CAUSE SOLUTION
LCD Display shows
abnormal result
The cuff position was not correct or it
was not properly tightened
Body posture was not correct during
testing
Speaking, arm or body movement, angry, excited or nervous during testing
Irregular heartbeat
(arrhythmia)
Apply the cuff correctly and try again
Review the “BODY POSTURE DURING MEASUREMENT” sections of
the instructions and re-test
Re-test when calm and without
speaking or moving during the test
It is inappropriate for people with
serious arrhythmia to use this Electronic Sphygmomanometer
12. Troubleshooting (2)
PROBLEM POSSIBLE CAUSE SOLUTION
LCD Display shows battery
symbol
LCD shows “Er 0” Pressure system is unstable before
LCD shows “Er 1” Fail to detect systolic pressure
LCD shows “Er 2” Fail to detect diastolic pressure
Low Battery Change the batteries
measurement
Don’t move and try again
25
Table 2
Enclosure Port
Phenomenon Basic EMC
standard
Electrostatic Discharge IEC 61000-4-2 ±8 kV contact
Radiated RF EM eld IEC 61000-4-3 10V/m
Proximity elds from RF
wireless communications
equipment
Rated power frequency
magnetic elds
IEC 61000-4-3 Refer to table 3
IEC 61000-4-8 30A/m
Immunity test levels
Home Healthcare
Environment
±2kV, ±4kV, ±8kV, ±15kV air
80MHz-2.7GHz
80% AM at 1kHz
50Hz or 60Hz
31
7. Displaying stored results
Picture 8-1 Picture 8-2 Picture 8-3
Picture 8-4 Picture 8-5 Picture 8-6
a. In Standby Mode, press “MEM” button to display the stored results. The cur-
rent memory bank will blink and the amount of results in this bank will be
displayed. Press “START” button to change over to other bank. Conrm your
selection by pressing “MEM” button. The current bank can also be conrmed
automatically after 5 seconds with no operation. See picture 8-1.
b. After selecting the memory bank, the LCD will display the average values in
this bank. See picture 8-2. If no result stored, LCD will show zeros. See picture
8-5.
c. Press “MEM” button, LCD will display the average value of all the results
which is measured from 5 o’clock to 9 o’clock in last 7 days in the current
user memory zone. See picture 8-3. If no result stored from 5 o’clock to 9
o’clock in last 7 days, LCD will display “0” for blood pressure and pulse rate.
d. Press “MEM” button again, LCD will display the average value of all the results
which is measured from 18 o’clock to 20 o’clock in last 7 days in the current
user memory zone. If no result stored from 18 o’clock to 20 o’clock in last 7
days, LCD will display “0” for blood pressure and pulse rate. See picture 8-4.
e. Then press the “MEM” button, the most recent result will be displayed. See
picture 8-6. Followed by, the blood pressure and pulse rate will be shown
separately. Irregular heartbeat symbol (if any) will blink. Press “MEM” button
again to review the next result. In this way, repeatedly pressing the “MEM”
button displays the respective results measured previously. If no result stored,
LCD will show zeros. See picture 8-5.
f. When displaying the stored results, the monitor will turn off automatically after
1 minute of no operation. You can also press the button “START” to turn off
the monitor manually.
20
PROBLEM POSSIBLE CAUSE SOLUTION
LCD shows “Er 3” Pneumatic system blocked or cuff is
LCD shows “Er 4” Pneumatic system leakage or cuff is
LCD shows “Er 5” Cuff pressure above 300mmHg
LCD shows “Er 6” More than 160 seconds with cuff
LCD shows “Er 7” Inner memory error
LCD shows “Er 8” Device parameter checking error
LCD shows “Er A” Pressure sensor parameter error
No response when you
press button or load battery
too tight during ination
too loose during ination
pressure above 15 mmHg
Incorrect operation or strong
electromagnetic interference
Connect the cuff correctly and
try again. If the monitor is still
abnormal, please contact the
local distributor or the factory
Measure again after ve
minutes. If the monitor is still
abnormal, please contact the
local distributor or the factory
Take out batteries for ve
minutes, and then reinstall
all batteries
26
Table 3
Proximity elds from RF wireless communications equipment
Test frequency
(MHz)
Band (MHz) Immunity test levels
Professional healthcare facility
environment
32
385 380-390 Pulse modulation 18Hz, 27V/m
450 430-470 FM, ±5kHz deviation, 1kHz sine,
28V/m
710 704-787 Pulse modulation 217Hz, 9V/m
745
780
810 800-960 Pulse modulation 18Hz, 28V/m
MAINTENANCE
1. Do not drop this monitor or subject it to strong impact.
2. Avoid high temperature and solarization. Do not immerse the monitor
in water as this will result in damage to the monitor.
21
3. If this monitor is stored near freezing, allow it to acclimate to room temperature before use.
4. Do not attempt to disassemble this monitor.
5. It is recommended the performance should be checked every 2 years or after
repair. Please contact the service center.
6. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after
moistened with water, diluted disinfectant alcohol, or diluted detergent.
7. No component can be maintained by user in the monitor. The circuit diagrams, component part lists, descriptions, calibration instructions, or other
information which will assist the user’s appropriately qualied technical personnel to repair those parts of equipment which are designated repairably
can be supplied.
8. The monitor can maintain the safety and performance characteristics for a
minimum of 10,000 measurements or three years, and the cuff integrity is
maintained after 1,000 open–close cycles of the closure.
9. It is recommended the cuff should be disinfected 2 times every week if needed (For example, in hospital or in clinique). Wipe the inner side (the side
contacts skin) of the cuff by a soft cloth squeezed after moistened with Ethyl
alcohol (75-90%), then dry the cuff by airing.
10. The monitor requires 6 hours to warm from the minimum storage temperature between uses until the monitor is ready for its INTENDED USE when the
ambient temperature is 20 °C.
27
870
930
33
1720 1700-1990 Pulse modulation 217Hz, 28V/m
1845
1970
2450 2400-2570 Pulse modulation 217Hz, 28V/m
5240 5100-5800 Pulse modulation 217Hz, 9V/m
5500
5785
8. Deleting measurements from the memory
When any result is displaying, keeping on pressing button “MEM” for three seconds, all results will be deleted. Press the button “MEM” or “START”, the monitor
will turn off.
Picture 9-1 Picture 9-2
9. Assessing high blood pressure for adults
The following guidelines for assessing high blood pressure (without regard to
age or gender) have been established by the World Health Organization (WHO).
Please note that other factors (e.g. diabetes, obesity, smoking, etc.) need to be
taken into consideration. Consult with your physician for accurate assessment,
and never change your treatment by yourself.
Classication of blood pressure for adults
Sistolic
(mmHg)
180
Moderate Hypertension
160
Mild Hypertension
140
High-normal BP
130
Normal BP
120
Severe Hypertension
80 85 90 100 110
BLOOD PRESSURE
CLASSIFICATION
Optimal
Normal
High-Normal
Grade 1 Hypertension 140-159 90-99 yellow
Grade 2 Hypertension 160-179 100-109 orange
Grade 3 Hypertension ≥180 ≥110 red
Diastolic
WHO/ISH Denitions and classication of blood pressure levels
(mmHg)
SBP
mmHg
<120 <80 green
120-129 80-84 green
130-139 85-89 green
DBP
mmHg
Indicator
Color
22
11. The monitor requires 6 hours to cool from the maximum storage temperature between uses until the monitor is ready for its INTENDED USE when
the ambient temperature is 20°C.
12. Not servicing/maintenance while the monitor is in use.
EXPLANATION OF SYMBOLS ON UNIT
28
Disposal: The product must not be disposed of along with other domestic
waste. The users must dispose of this equipment by bringing it to a specic
recycling point for electric and electronic equipment.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
34
Follow instructions for use
Caution: read instructions (warnings) carefully
Type BF applied part
WEEE disposal
0197
23
Medical Device complies with Directive 93/42/EEC
29
35
Manufacturer
Date of manufacture
Authorized representative in the European community
Serial number
IP20
Covering Protection rate
Keep in a cool, dry place
Keep away from sunlight
Note: It is not intended to provide a basis of any type of rush toward emergency
conditions/diagnosis based on the color scheme and that the color scheme is
meant only to discriminate between the different levels of blood pressure.
10. Technical alarm description
The monitor will show ‘HI’ or ‘Lo’ as technical alarm on LCD with no delay if
the determined blood pressure (systolic or diastolic) is outside the rated range
specied in part SPECIFICACIONS. In this case, you should consult a physician
or check if your operation violated the instructions.
The technical alarm condition (outside the rated range) is preset in the factory
and cannot be adjusted or inactivated. This alarm condition is assigned as low
priority according to IEC 60601-1-8.
The technical alarm is non-latching and need no reset. The signal displayed on
LCD will disappear automatically after about 8 seconds.
Product code
Lot number
24
30
36
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Table 1
Emission
Phenomenon Compliance Electromagnetic
RF emissions CISPR 11 Group 1,
Harmonic distortion IEC 61000-3-2
Voltage uctuations
and icker
Class B
Class A
IEC 61000-3-3
Compliance
environment
Home healthcare
environment
Home healthcare
environment
Home healthcare
environment
M32777-GB-Rev.3-02.20
IP20
32777 / KD-5920
ANDON HEALTH CO., LTD.
No. 3 JinPing Street, YaAn Road, Nankai District,
Tianjin 300190, China
Made in China
iHealthLabs Europe SAS
36 Rue de Ponthieu,
75008, Paris, France
0197
Loading...