Gima FOLDING CHAIR User guide

User’s Manual

Weld Series – Spencer 420, 425 and 427

Transport chairs

This appliance conforms with the Directive 93/42/CEE “Medical Devices”

Guarantee of Quality system for the production and the final control of the products certified by
the notifying body TÜV SÜD Product Service GmbH

INDEX

General information page 2
Warnings page 2
Description of product page 5

Operating instructions page 6
Maintenance and cleaning page 8
Accessories and spare parts page 10

First edition: 25/08/09

Rev. 3: 26/09/2019

Spencer Italia s.r.l.

Tel. [phone] / Fax [phone] / e-mail: [e-mail]

1

Thank you for choosing a Spencer product

1. GENERAL INFORMATION

1.1 Aim and contents

The aim of this manual is to supply all the information necessary so that the client, will not only attain adequate
use of the appliance, he will also be capable of using the instrument in the most autonomous and secure way
possible. This includes information regarding technical aspects, functioning, maintenance, spare parts and
safety.

1.2 Conservation of the instruction manual
The instruction and maintenance manual must be kept together with the product, for the whole life of the
device, inside the specially provided container and above all, away from any substances or liquids which could
compromise perfect legibility.

1.3 Symbols used
Symbol Meaning

General or specific warning

See instructions for use

Lot number

Serial number

Product code

The product is compliant with the specifications of the Directive 93/42/CEE

1.4 Servicing requests

For any information regarding the use, maintenance and installation, please contact the Spencer Customer Care
Service on tel. [phone], fax [phone], e-mail [e-mail] or write to Spencer Italia
S.r.l. – Via Provinciale, 12 - 43038 Sala Baganza (Parma) - ITALY. In order to facilitate the assistance service,
please always indicate or communicate the serial number (SN) or lot number (LOT) shown on the label applied
on the box or on the device.

1.5 Demolition

When the devices are no more suitable for being used, if they haven’t been contaminated by any particular
agents, they can be disposed of as normal solid waste, otherwise follow the current regulations about
demolition.

1.6 Labelling

Each device has got an identifying label, positioned on the device itself and/or on the box. This label includes
information about the manufacturer, the product, CE mark, lot number (LOT). It must never be removed or
covered.

2. WARNINGS

2.1 General warnings

• The product must be used by trained personnel only, having attended specific training for this device and

not for similar products.

• Training routines must be registered on a special register in which the names of those trained, of the

trainers, date and place are indicated. This register which will certify the eligibility of the operators to use
the Spencer device has to be kept for a period of 10 years after the disposal of the device itself. This register
will be made available to the Competent Authorities and/or manufacturer if requested.

• Spencer Italia S.r.l. is always at your disposal to plan trainings on products.

• Before carrying out any kind of operation on the appliance (training, installation, use), the operator must

carefully read the enclosed instructions, paying particular attention to the correct safety precautions and to
the procedures to be followed for installation and for correct use.

• If the instructions belong to another device and not the device received, inform the manufacturer

immediately and avoid use of the device.

• In the case of any doubts as to the correct interpretation of the instructions, please contact Spencer Italia

S.r.l. for any necessary clarifications.

• Do not allow untrained persons to help during the use of the device, because they could cause damage to

the patient or to themselves.

• Regularly check the appliance, carry out the prescribed maintenance and respect the average life span, as

indicated by the manufacturer in this user’s manual.

• Before each use of device the perfect operating state of the device must be checked as specified in the

Instruction manual. If any damage or abnormalities which could in any way influence the correct functioning
and the safety of the device, of the patient and or of the user are detected, the device must be immediately
removed from service and the manufacturer must be contacted.

2

• If any failure or incorrect functioning of the device is detected, it must be immediately substituted with a

similar item so that the rescue procedures are guaranteed without any interruption.

• Use of the device in anyway other than described in this manual is forbidden.

• Do not alter or modify in any way the appliance; any such interference could cause malfunctions and injury

to the patient and/or rescuer.

• The appliance must not in any way be tampered with (modification, adjustment, addition, replacement). In

such cases all responsibility will be denied for any malfunctions or injuries caused by the appliance itself;
moreover CE certification and product warranty will be considered void.

• Those who modify or have modified, prepare or have prepared medical appliances in such a way that they

no longer serve the purpose for which they were intended, or no longer supply the intended service, must
satisfy the valid conditions for the introduction onto the market.

• Handle with care.

• Ensure that all the necessary precautions are taken in order to avoid the hazards that can arise as the result

of contact with blood or body fluids.

• Register and store with these instructions: lot number, place and date of purchase, first date of use, date of

checks, name of users, any comments.

• When the device is being used, the assistance of qualified staff must be guaranteed.

• Do not store the device underneath any heavy objects which could cause structural damage.

• Store in a cool, dry, dark place and do not expose to direct sun.

• Store and transport device in its original packaging.

• The device not be exposed to or come into contact with any source of combustion or inflammable agents.

• Position and adjust the device taking care not to cause any obstruction to rescuers and or any other rescue

equipment.

• Attention: laboratory testing, post production tests, instruction manuals cannot always consider every

possible scenario for use. This means that in some cases the performance of the product could be notable
different from results to date obtained. Instructions are continually being updated and are under tight
surveillance of fully qualified staffs with adequate technical formation.

• With reference to the D. Lgs. 24th February 1997, n. 46 emended by D. Lgs. 25/01/2010, n. 37 –

Acknowledgement of Directive 93/42/CEE and 2007/47/CE, we remind both public and private operators
that they are obliged to report any accident that involves any medical device to the Ministry of Health and to
the Manufacture as specified and within time given by the European regulations.

• In addition, both public and private operators are obliged to inform the manufacturer of any measures that

should be adopted to make the steps necessary to guarantee the safety and the health of the patients and
the users of any medical device.

• As a Distributor or End Users of products manufactured and/or marketed by Spencer Italia S.r.l., you are

strictly required to have a basic knowledge of any legal requirements applying to the devices contained in
this supply that are in power in the goods final destination Country (including laws and norms regarding
technical specifications and / or safety requirements) and therefore you are also strictly required to have the
necessary knowledge to guarantee all aspects regarding the total conformity of the products to the
regulations in the relevant territory.

• Promptly notify Spencer Italia S.r.l. regarding any revisions to be made by manufacturer in order to

guarantee the conformity of the product to the territory’s legal specifications (including those resulting from
rules and/or norms of other nature).

• Act, with all due care and diligence, and contribute to ensure conformity to general safety requirements of

all devices marketed in the territory, by providing final users with all necessary information for carrying out
periodical checks on their devices, as specified in the relevant user manual.

• Actively contribute to product safety checks on products sold, by communicating any relevant risk analysis

information both to the manufacturer and to any competent authorities so that the necessary action can be
promptly taken.

• You are aware that in the event of any failure to conform to the above mentioned requirements you will be

deemed fully responsible for all damages that might occur. Therefore we expressly disclaim any
responsibility and/or liability for your non-compliance with the present “Regulatory provisions”.

2.2 Specific warnings

• Establish a maintenance program and periodic testing, identifying a reference employee. The person to

whom the ordinary maintenance of the device is entrusted must ensure the basic requirements foreseen by
the manufacturer in the user’s manual.

• Training routines must be registered on a special register in which the names of those trained, of the

trainers, date and place are indicated. This register which will certify the eligibility of the operators to use
the Spencer device has to be kept for a period of 10 years after the disposal of the device itself. This register
will be made available to the Competent Authorities and/or manufacturer if requested.

• Use only accessories/spare parts that are original or approved by Spencer Italia S.r.l., in order to carry out

any operation without causing any alteration or modification to the device, otherwise we assume no
responsibility for the proper functioning or damage resulting from device to the patient or the operator and
warranty and will be considered void according to the compliance to the Medical Device Directive 93/42/CEE.

• Always respect the maximum capacity of the device, as indicated in this user's manual. Maximum load

capacity means the total weight distributed according to the human anatomy. In determining the load of the
total weight on the product, the operator must consider the weight of the patient, the equipment and the
accessories. Moreover, the operator must consider that the overall dimensions of the patient do not
reduce the functionality of the device.

3

• Never leave the patient unassisted on the device, because he may be injured.

• The device and all its components, after washing, should be allowed to dry completely before storing.

• Lubrication must be carried out after cleaning and complete drying.

• Follow the procedures approved by the Emergency Medical Services for the immobilization and transport of

patients.

• Follow the procedures approved by the Emergency Medical Services for the positioning and transport of the

patient.

• Do not use the device if it is pierced, torn or frayed.

• Make sure, before lifting, that the operators have a firm grip on the device.

• Avoid pulling the device on rough surfaces.

• Do not lift by crane or other mechanical lifts.

• The device is a chair for patients handling and cannot be used as a stationing device.

• First practice with an empty chair in order to get used to the way in which the stretcher manoeuvres.

• For the use of the device, at least two operators in suitable physical conditions are needed; they

must therefore have strength, balance, coordination, and common sense and must be trained on the
correct functioning of the device Spencer chair.

• For techniques for loading particularly heavy patients, for rescue operations on steep ground or

in unusual circumstances, it is recommended the presence of more operators (not just two as required under
standard conditions).

• The maximum weight sustained by each rescuer must comply with requirements prescribed by the law of

the Country, concerning Health and Safety at Work.

• Before each use, check the integrity of the belts and their hooks, as specified in the user’s manual. In case

of malfunction or damage that may compromise the function and safety of the device, patient or operator, it
is necessary to replace the belts.

• Always immobilize the patient, using the belts supplied by the manufacturer, since the lack of immobilization

can cause serious damage.

• Use the chair only as described in this user's manual.

• Pay a lot of attention to possible obstacles (water, ice, debris, etc.) on the route of the stretcher, because

they could cause loss of balance for the operator and compromise the proper functioning of the
device. If you can not set the path free from obstacles, choose an alternative path.

• For slopes greater than 10 mm the device must be raised, making sure to grab it on the frame.

• Condensation, water, ice and dust accumulation can affect the correct operation of the device, making it

unpredictable and causing a sudden alteration of the weight that operators have to bear.

• The chairs are certified for use with dedicated Spencer fastening systems, it is therefore forbidden the use of

fasteners not approved by the manufacturer. Fastening systems that have not been approved may alter
the structural and functional characteristics of the chair.

• It is not permitted to use the chair transport in the open position, even if provided with the appropriate

fasteners.

2.3 Contraindications and side effects
The use of this device, if used as described in this manual, does not present any contraindications or collateral
effects.

ZIONE

2.4 Physical requirements of the operators

Profile Series transport chairs are destined to professional use only. The rescue operators must have the
following minimum requirements:

• physical capacity for operating the device

• be able to seize the device firmly with both hands

• have strong back, arms and legs for lifting, pushing and pulling the chair

• have a good muscular coordination
The operators must be trained in efficient, effective and safe patient handling.
This chair requires the employment of at least two operators equipped with strength, balance, coordination and
common sense.
Patient loading procedures for extremely heavy patients, operations in rough terrain and in particular situations
more operators may be needed (not only two as in normal conditions).

The capacities of the various operators must be considered before determining his role in the
employment of the chair.

4

3. DESCRIPTION OF PRODUCT

3.1 Intended use

Weld Series transport chairs Spencer 420, 425 e 427 are medical devices designed and constructed to allow the
transport of patients in a sitting position from the point of intervention until the ambulance; therefore it is not
permitted to use the open chair inside the emergency vehicles, even if provided with suitable fastening
systems.
These models are used in all cases in which, because of the particular conditions of the place of intervention, it
is not possible to use devices having a greater encumbrance. Weld Series transport chairs Spencer 420, 425
and 427 are characterized by an extremely low weight and by the simplification of closing and opening
operations, which are completely automatic.
It is not expected that the patient can intervene on the device.

3.2 Main components

Fig. A

n° Description of component Material

1 Backrest cover PVC
2 Backrest frame Steel
3 Back handles Steel / rubber
4 Seat cover PVC
5 Compass for closure/opening Steel
6 Front, left telescopic handle Aluminium / rubber
7 Black wheel Ø 125 mm Polyprolylene
8 Black wheel Ø 100 mm with brake Polyprolylene

9 Footrest Aluminium
10 Front, right telescopic handle Aluminium / rubber
11 Seat frame Steel

5

3.3 Models
This model could be modified, with reference to codes and/or descriptions without any previous
notification.

ST10420A Spencer 420 Transport chair with two wheels, silver
ST20420A Spencer 420 Transport chair with two wheels, yellow
ST00420A Spencer 420 Transport chair with two wheels, blue
ST10425B Spencer 425 Transport chair with four wheels, silver
ST20425B Spencer 425 Transport chair with four wheels, yellow
ST11425A Spencer 427 Comfort chair with four wheels

3.4 Technical data

Characteristics 420 425 427

Height open (mm) 900 900 1200
Height folded (mm) 900 900 1200
Width (mm) 490 490 490
Thickness folded (mm) 180 210 210
Length (mm) 590 680 680
Length with open handles (mm) 1180 1180 1180
Weight (kg) 10,5 12 12
Load capacity (kg) 150 150 150

3.5 Reference standards

Reference Title of document

MDD 93/42/CEE European Directive about Medical Devices

Modifications to 90/385/CEE Directive about active implants,

MDD 2007/47/CEE

Legislative Decree 24/02/1997, n. 46 Application of the 93/42/CEE Directive about Medical Devices
Legislative Decree 25/01/2010, n. 35 Modifications and additions to the 20/02/97 Decree n. 46

UNI EN 1865-1

UNI EN 1789 Medical vehicles and their equipment - Ambulances
UNI EN ISO 14971 Application of risks managing to medical devices
UNI CEI EN 980 Graphic symbols used for medical devices labelling
UNI CEI EN 1041 Information supplied by the medical devices manufacturer

CEI EN 62366

MEDDEV 2.4/1a-b Guideline for the classification of medical devices
NB-MED 2.5.1 /Rec 5 Technical Documentation
MEDDEV 2.7.1 Clinical Data
MEDDEV 2.12/1 Medical Devices vigilance system

UNI EN 14155

3.6 Environmental conditions

Functioning temperature: from -15 to +50 °C
Storage temperature: from -20 to +60 °C
Relative humidity: from 15 to 90 %

4 OPERATING INSTRUCTIONS

4.1 Transport and storage

Before transporting the appliance, make sure that it is correctly packaged ensuring also that there are no risks
of shocks, bumps or falls during the transport itself.
Keep the original packaging for use in case of any further transport and for storage. Damage to the appliance
caused during transport and handling is not covered by the guarantee. Repairs or replacement of the damaged
parts are the responsibility of the client. The device must be stored in a dry, cool area away from direct
sunlight. It must not be placed in contact with any substances or chemical agents which could cause damage
and reduce safety characteristics.
During storage, do not place heavy materials on the transport chair. The transport chair should not be
considered and used as a supporting surface for any type of material.

4.2 Preparation

On receipt of the product:

•

Remove the packaging and display the material so that all components are visible.

•

Check that all the components/pieces on the accompanying list are present.
The appliance must be checked before every use so as to reveal any working abnormalities and/or damage
caused by transport and/or storage. In particular, check:

Directive 93/42/CEE about medical devices and Directive
98/8/CE about the introduction of biocides onto the market

Directives for stretchers and other patient transport equipment
on ambulances

Medical Devices - Application of the utilisation characteristics
of engineering to medical devices

Clinical evaluation of the medical devices for human beings ­Part 2: Clinical evaluation plans

6

•

General functionality of the device

•

Cleanliness of the device (remember that the failure of cleaning may cause the risk of cross infections)

•

Absence of cuts, holes, tears on the structure, including the straps

•

Correct fixation of all nuts, bolts and screws

•

Correct fixation of straps

•

Correct fastening of straps

•

State of use (moving parts, wheels, belts, covers)

•

Integrity of seams and covers

•

Integrity of components

•

Integrity of handles (Are they torn or show signs of tearing? The seams are intact?)

•

Lubrication of moving parts

•

State of wear of wheels and braking system

•

Functioning of springs

•

The emergency vehicle is equipped with a Spencer fixing system dedicated to the chair

•

There are safety belts for the immobilization of the patient and they are intact and functioning

•

Welds are intact, with no cracks or breaks

•

No piping or metal sheet present bends or cracks

•

The backrest has no tears or cracks

If the above conditions are met, the device may be considered ready for use; otherwise you must immediately
remove the device from service and contact the manufacturer.

4.3 Functioning
In any case, during the use of the transport chair, all operators involved in handling operations
must be in position facing the patient.

4.3.1 Opening the device

Stand at the side of the transport chair and, keeping it slightly tilted
forward, proceed to open, by separating the two ends of the frame
(back and seat) until the automatic lock in the open position. Between
the backrest and the seat in the open position is created so an angle of
approximately 90°. Make sure that the device is securely locked safely.

4.3.2 Closing the device

After downloading the patient, proceed with the closure of the transport
chair as described below, to minimize storage space.

1. Gently press with a foot on the crossbar (n° 6 bis) of the locking
system compasses (n° 6).

2. Close the device folding it over itself with movements opposite to
those described for the opening.

Fig. B

Fig. C

7

4.3.3 Patient transport with the transport chair with two wheels (Spencer 420)

• Before loading the patient, move the transport chair as much as possible next to the patient.

• Immobilize the patient to the device through the supplied belts, checking their correct positioning and sealing.

• The first operator (in front of the patient) extracts the telescopic handles and tilts the device, while the
second operator (located behind the patient) grabs the structure and moves the device towards him.

• Maintain the rear wheels in contact with the ground and, to move, pull the transport chair in the desired
direction.

4.3.4 Patient transport with the transport chair with four wheels (Spencer 425 and 427)

• Before loading the patient, move the transport chair as much as possible next to the patient.

• Immobilize the patient to the device through the supplied belts, checking their correct positioning and sealing.

• Make sure all four wheels of the device are in contact with the ground.

• Drive the transport chair in the desired direction, preferably pulling.

Restrict the movement with the wheels only on flat surfaces. To overcome uneven or rough surfaces
it is appropriate to lift the device. When lifting the transport chair, the operator in front of the
patient should hold the telescopic handles, while the operator that stands behind the patient should
grab the rear handles. The lift must occur in contemporarily. The operator that stands behind the
patient will coordinate and guide the movements.

4.3.5 Patient transport on the stairs

• Before loading the patient, move the transport chair as much as possible next to the patient.

• Immobilize the patient to the device through the supplied belts, checking their correct positioning and sealing.

• The first operator (in front of the patient) extracts the telescopic handles while the second operator (located
behind the patient) grabs the rear handles. The lift must occur in contemporarily. The operator that stands
behind the patient will coordinate and guide the movements.

For the type of transport described or in the case of particularly demanding paths, it may be
necessary to use a third operator with control functions and possible support.

4.4 Troubleshooting

PROBLEM CAUSE REMEDY

Geometry of operation compromised

The device can not be released
from the closed or open position

Difficulty in extracting and
inserting the telescopic handles

Restricted rotation of the wheels

Damages to the structure

5 MAINTENANCE AND CLEANING

5.1 Cleaning

Failure to carry out the correct cleaning routine could increase the risk of cross infection, due to presence of
body fluids and/or residuals.

The operator must always wear adequate personal protection such as gloves and mask etc. during
all checking and cleaning procedures.

The exposed metal parts are usually treated and/or painted in order to increase their resistance.
Clean the exposed parts with water and delicate soap: never use solvents or stain removers.
In the event of a possible use disinfection products that have not solvent or corrosive action on the materials
constituting the device.
In order to obtain a shine effect, it is possible to use car waxes and creams.
We recommend the use of the polishing detergent Spencer STX 99.
Rinse thoroughly with warm water making sure that you have removed all traces of detergent, which
could degrade or compromise the integrity and durability of the device. The use of high pressure water should
be avoided. Water penetrates the joints and removes the oil, creating the risk of corrosion of components.

or seized

Compass locking system damaged

Presence of sediments in the sliding
seat or problems to the aluminium
profile

Presence of sediments in the sliding
seat

Structure to support the wheel scroll
deformed

Misuse or not adequately trained
staff

Verify after proper lubrication if the
problem persists, if so put the
device out of service immediately
and contact the service centre or
the manufacturer
Carry out thorough cleaning; if the
problem persists put the device out
of service immediately and contact
the service centre or the
manufacturer
Carry out thorough cleaning; if the
problem persists put the device out
of service immediately and contact
the service centre or the
manufacturer
Put the device out of service
immediately and contact the
service centre or the manufacturer
Put the device out of service
immediately and contact the
service centre or the manufacturer

8

Allow to dry thoroughly before storing. Drying after washing or after use in wet environments must be natural
and not forced, do not use flames or other sources of direct heat.

5.2 Maintenance

5.2.1 Precautionary maintenance

The person who carries out the precautionary maintenance of the appliance (user in person,
manufacturer/supplier or a third party) has to guarantee the following basic requirements:

• Technical knowledge of the appliance and of the periodic maintenance procedures as described in these

instructions.

• Specific qualifications and training in the maintenance operations of the appliance in question.

• The use of components/replacement parts/accessories that are either original or approved by the supplier,

in such a way that each operation causes no alteration or modification to the appliance.

• Possession of the checklist of operations carried out on the appliance.

• Guarantee complete adherence to the instructions of the Directive 93/42/CEE which includes also the

obligation towards the manufacturer to maintain post sales records and traceability of the appliance if

requested.

During all checking, maintenance and cleaning procedures, the operator must wear adequate
personal protection such as gloves, mask, glasses etc.

Checks to be carried out before and after each use, and at least once a month, are as follows:

•

General functionality of the device

•

Cleanliness of the device (remember that the failure of cleaning may cause the risk of cross infections)

•

Absence of cuts, holes, tears on the structure, including the straps

•

Correct fixation of all nuts, bolts and screws

•

Correct fixation of straps

•

Correct fastening of straps

•

State of use (moving parts, wheels, belts, covers)

•

Integrity of seams and covers

•

Integrity of components

•

Integrity of handles (Are they torn or show signs of tearing? The seams are intact?)

•

Lubrication of moving parts

•

State of wear of wheels and braking system

•

Functioning of springs

•

The emergency vehicle is equipped with a Spencer fixing system dedicated to the chair

•

There are safety belts for the immobilization of the patient and they are intact and functioning

•

Welds are intact, with no cracks or breaks

•

No piping or metal sheet present bends or cracks

•

The backrest has no tears or cracks

The inspection frequency is determined by factors such as legal requirements, the type of use,
frequency of use, environmental conditions during use and storage. Please note that you must do the

cleaning as described in paragraph 5.1 and verify functionality before and after each use. Spencer Italia S.r.l.
declines any responsibility for the proper functioning or damages caused to the patient or user by the use of
devices not subject to routine maintenance warranty and will void the compliance to the Medical Device
Directive 93/42/CEE.

The person responsible for routine maintenance can identify damaged/worn parts, but the replacement or
restoration of them can only be done by the manufacturer or or by an authorized service centre.

Use only accessories/original spare parts approved by Spencer Italia S.r.l., otherwise we will accept no
responsibility for the incorrect functioning and/or damage caused by the use of any device which has not been
repaired, or certified on expiry date by the manufacturer or by one of the manufacturer's authorised service
centres. Warranty will be considered void in compliance with the Medical Device Directive 93/42/EEC.

5.2.2 Periodic maintenance

The device must be subjected to annual revisions to verify the proper operation and compliance with
the safety requirements guaranteed by the Manufacturer when the device is placed on the market.
The revisions must be made by the Manufacturer, who uses specialized internal and external
technicians and is authorized by the Manufacturer himself. In the absence of such annual revisions,
the device must be SECRETED UNTIL REPAIRING, otherwise it must be DISPOSED OF AND IT MUST
BE GIVEN COMMUNICATION TO THE MANUFACTURER.
For any operations that are not carried out directly by the Manufacturer but by an authorised centre,
we have to underline that a report regarding all operations carried out must be requested. This will
permit both Spencer Italia S.r.l. and the end user to keep a log book regarding the operations
carried out on the device.

9

5.2.3 Life span

The device, if used as described in this user manual, has an average life span of 5 years from the
date of purchase, which can be extended following annual revisions.
The life span can be extended, based on manufacturer’s or on authorized service center evaluation,
if the safety requirements of the device are still guaranteed.
In the absence of such extensions, the device must be DISPOSED AND IT MUST BE COMMUNICATED
TO THE MANUFACTURER.
Belts, fabric seat and backrest shall be replaced every two years.
Spencer Italia S.r.l. disclaims any responsibility for incorrect operation or for any damage caused by
the use of devices not revised by the Manufacturer or authorized service center, or that have
exceeded the maximum permissible life span.

5.2.4 Special servicing

Only the Manufacturer or centres with written authorisation are authorised to complete
any special servicing operations.

For any operations that are not carried out directly by the Manufacturer but by an authorised centre,
we have to underline that a report regarding all operations carried out must be requested. This will
permit

6. ACCESSORIES AND SPARE PARTS

6.1 Accessories

ST30451A Fixation system
ST36451B F 400 Fixation system 20 G
ST00428B Stabilizer Padded seat/backrest

6.2 Spare parts

ST00421A Backrest cover in orange PVC, heavy
ST00422A Seat cover in orange PVC, heavy
ST00423A Pair of orange safety belts
ST00425A Backrest cover in black PVC with Spencer logo
ST00426A Seat cover in black PVC
ST00427A Pair of black safety belts
ST10427B Footrest for Spencer 425
ST21400A Wheel Ø 100 mm grey, pivoting with brake of rolling and axis
ST22400A Wheel Ø 125 mm grey, antistatic
ST30445A Posterior handle with knob in black PVC
ST30449A Knob in black PVC
ST30457A Group right telescopic handle, silver
ST30437A Group left telescopic handle, silver
ST30475A Group right telescopic handle, black
ST30474A Group left telescopic handle, black
ST42042A Profile stopper group left telescopic handle, black nylon
ST42043A Profile stopper group right telescopic handle, black nylon

both Spencer Italia S.r.l. and the end user to keep a log book regarding the operations carried out on the device.

10

ATTACHMENT A – TRAINING REGISTER

The product must be used by trained personnel only, having attended specific training for this device and not
for similar products.

Keep this document at least 10 years from the end of life of the device.

Operator’s

name

Basic training

Training date

Advanced

training

Training method (user’s

manual, during service,

former class, etc.)

Trainer

11

ATTACHMENT B – MAINTENANCE REGISTER

Keep this document at least 10 years from the end of life of the device.

Perform the required maintenance and to respect the life span of the device, as indicated by the manufacturer
in the user’s manual.

Code and description of the device

Purchase date

Lot (LOT) or serial number (SN)

Bought by

PERSON IN
CHARGE OF

SERVICE

(Operator/

Authorized

centre/

SERVICE

DATE

KIND OF SERVICE

(Maintenance/

check/

extension of life span)

OPERATIONS MADE ON THE

DEVICE

RESULT

Manufacturer)

The information contained in this document could be modified without any warning and is not to be intended as a

commitment on behalf of Spencer Italia S.r.l. Spencer products are exported to many countries and the same identical

regulations are not always valid. For this reason there could be differences between the description here described and the

product actually delivered. Spencer continually strives to reach the perfection of all items sold. We therefore hope you will

understand if we reserve the right, at any time, to modify the shape, equipment, lay-out or technical aspects that are herein

© Copyright Spencer Italia S.r.l.

No part of this document can be photocopied, reproduced or translated into another language without the written approval of

Warning

described.

All rights reserved.

Spencer Italia S.r.l.

12