PROFESSIONAL MEDICAL PRODUCTS
Smart Bracelet
PREPARATION
Only when the power is sufcient, can the machine be started. For that
the USB contact port is used for charging, please insert the bracelet
into the USB port, such as the charging head and the USB port of the
notebook for charging.
At rst, please pull out the wrist
band and remove the body of the
bracelet
Plug into the USB
charging head to charge
For the rst usage, please take out the bracelet and
charge the device with the corresponding charger.
When charging, the bracelet will start up automatically (charging method is as follows: remove the
main body of the bracelet from the wristband and
plug the charging port into the standard USB inter-
face to charge).
• It is recommended to use a 5V1A charger to charge
the device
WEARING METHOD
1. The ulnar styloid process is the best
way to wear the bracelet;
2. Adjust the size of the wrist in accordance with the adjusting hole;
Wear a wristband buckle;
3. The sensor should be close to the
skin to avoid the movement
Malleolus ulnaris
Sensor
POWER ON/OFF
1. When the bracelet is turned off, a long touch of the function button can
make the device vibrate and start up for more than 3 seconds
2. When the bracelet is on, switch to the shutdown interface, and the
long touch function button will vibrate for more than 3 seconds to shut
down the device
OPERATION
1. When the bracelet is turned on, a short touch of the function button
can light up the screen or switch the display;
2. No operation with the default ve-second message screen, the user
can connect to the mobile APP to modify the message screen time;
3. Switch to the automatic test of heart rate and blood pressure interface,
and stop the test of leaving heart rate and blood pressure interface.
MOBILE APP DOWNLOAD
Scan the QR code below or enter the major application markets to
download and install “DayBand”
Device requirements: iOS 8.0 and above; Android 4. 4 and above, support bluetooth 4.0.
DEVICE ATTACHMENT
When using the bracelet for the first time, the APP should be connected
for calibration. The bracelet will automatically synchronize the time after
successful connection, otherwise the step and sleep data are not allowed.
Google Play iOS
Open mobile app
Click the setting Icon
↓
My device (IOS)
Search the device (Android)
↓
Pull down the scan device
↓
Click the device connection
Bluetooth connection: After the pairing is successful, the App automatically saves the Bluetooth address of the bracelet. When the App is opened
or running in the background, it will automatically search and connect the
bracelet.
Data Synchronism: Manually pull down the synchronization data on the
app homepage; The bracelet can store 7 days of the offline data. The
more data is, the longer the synchronization time will be, which is about
2 minutes at most. After the synchronization is completed, there will be a
prompt “Synchronization completed”.
APP FUNCTIONS AND SETTINGS
Personal information and sports goals
Please set the personal information
at first after entering the app
Setting → Personal setting
Head image - Gender - Age - Height - Weight
can be set
Personal information can improve
the accuracy of data.
Customize your daily sports goals
and exercise reasonably
Planning is conducive to the improvement
of physical fitness.
FUNCTION INTRODUCTION OF BRACELET
Main interface
When there is no connection icon, it means that the bracelet
is not connected to the mobile phone. When the connection
icon appears, it means that the connection is successful.
When the bracelet and the app are paired for the first time,
the bracelet will synchronize the time, date and week of the
mobile phone.
Long press 3 seconds to switch the main interface
Motion Data
Display step counting, the default motion data mode of the
bracelet is to wear the bracelet on the wrist. When the user
walks and the arm swings, the bracelet is recorded as the
walking step data in accordance with the number of the swings, which consumes the heat and walking distance.
Heart rate monitoring
In the heart rate monitoring interface, During the measurement, please wait for several tens of seconds for the data
to appear
Blood pressure monitoring
In the Blood pressure monitoring interface,During the measurement, please wait for several tens of seconds for the
data to appear
Blood oxygen monitoring
In the Blood oxygen monitoring interface, During the measurement, please wait for several tens of seconds for the data
to appear
Notes for heart rate / blood pressure test:
• During the test, the icon will beat and the heart rate led on the back of the
bracelet will light up
During the test, the sensor should be close to the skin to avoid the inuence of
external light on the accuracy of the test
Keep the test area clean, sweat or stains will affect the test results
Movement patterns
In the motion interface, press and hold
for three seconds to enter the specific
motion interface, which includes multiple movements. Click to switch. In the
motion interface, long press for three
seconds to start the motion, long press
for three seconds to pause, and then
click to switch the motion mode.
Information interface
In the message interface, press and hold for three seconds to view the message, click turn page, and after
viewing the information, you can exit or press and hold
for three seconds to exit.
More functional interface
In the more function interface, long press for three seconds to enter the lower menu interface for more function operations.
Find phone interface
In the connected state, click the “Find mobile phone”
option, and the mobile phone will send out a vibration
reminder or a ringing tone reminder.
Restore setting interface
Press and hold for three seconds in the reset interface
to reset the bracelet to the factory settings.
About the wristband interface
On the hand ring interface, the last four digits of Bluetooth address and software version number are displayed.
Shutdown interface
In the shutdown interface, press and hold the mobile phone for more than three seconds to vibrate and
shutdown.
PROMOTING FUNCTION
The reminder function needs to turn on the reminder switch in the app setting center, and
keep the mobile phone and the bracelet in the status of successful Bluetooth connection,
so as to vibrate the reminder when the message comes.
Call reminding: When calling, the bracelet will vibrate and display the name or number
of the call. (If the caller’s name is saved in the phone book, the name will be displayed,
otherwise the number will be displayed.)
SMS reminder: When receiving the SMS, the bracelet will vibrate, and the SMS icon
will be displayed to remind: When the SMS of the contact person in the address book
displays the name, the SMS of the stranger displays the number.
Facebook reminding: When receiving facebook information, the bracelet will vibrate
and display facebook icon reminder.
Twitter reminds: When receiving the Twitter message, the bracelet will vibrate and display the twitter icon reminder.
Intelligent alarm clock: Three alarm clocks can be set. After setting, it will besynchronized to the bracelet. Intelligent alarm clock is a silent alarm clock. When the alarm is set,
the bracelet will vibrate moderately, and offline alarm is supported.
Sedentary reminder: The default reminder inter val is one hour; When connected, if the
user does not move within one hour after opening, the bracelet will vibrate to remind
the user to move.
COMMON PROBLEMS
Why should we wait 8 seconds for heart rate test?
To test your hear t rate, you need to collect signals for a long time to accurately calculate
your heart rate.
What if Bluetooth doesn’t work? (Connection / reconnection failed or slow)
Confirm whether your device is IOS 8.0 and Android 4.4 or above and suppor t Bluetooth 4.0
1. Due to the problem of the signal interference in Bluetooth wireless connection, the
time of each connection may not be the same. If the connection fails for a long time,
please ensure that the operation is carried out in the environment without magnetic
eld or interference of multiple Bluetooth devices.
2. Turn Bluetooth off and on again
3. Turn off the background application of the mobile phone or restart the mobile phone
4. Do not connect other Bluetooth devices or functions at the same time.
5. Whether the app runs normally in the background. If not, it may not be connected.
Can’t search for the bracelet?
Because the bracelet is not found by the mobile phone during Bluetooth broadcast, please make sure that the bracelet is powered on, activated, and not bound with other mobile
phones, and then close the bracelet to the mobile phone. If it is still invalid, please turn
off the Bluetooth of the mobile phone, and restart the Bluetooth of the mobile phone
20 seconds later.
Why should the bracelet be worn tightly when measuring heart rate?
The bracelet adopts the principle of light reflection. After the light source penetrates the
skin, the signal reflected to the sensor is collected to calculate your hear t rate. If it is
not worn tightly, there will be ambient light entering the sensor, which will affect the
measurement accuracy.
Why hasn’t the reminder been activated?
Android mobile phone: Confirm that the mobile phone is connected to the bracelet, open the
corresponding permissions in the mobile phone settings after connecting, allow the “Dayband”
app to access calls, SMS, contacts, and keep “Dayband” running in the background; If the
mobile phone is installed with security software, please add “Dayband” as trust.
Apple mobile phone: If there is no reminder after connecting, it is recommended to restart the
mobile phone and reconnect. When connecting the bracelet again, you must wait until the mobi-
le phone pops up [Bluetooth matching request], and click [Match] before there is a reminder.
Is the bracelet waterproof?
It supports IP67 waterproof and dustproof grade (IP67 standard is water depth below 35
degrees and water depth below 1 meter for 30 minutes). In general, hand washing, rain
washing and car washing can be worn at will, and when it is hot water, it can’t be worn.
Does the Bluetooth connection need to be on all the time? Is there any
data after the disconnection?
Before the data is not synchronized, the data is kept on the bracelet host (data can be
kept for seven days). When the Bluetooth connection between the mobile phone and
the bracelet is successful, the data of the bracelet will be uploaded to the mobile phone
automatically. Please synchronize the data to the mobile phone in time.
Note: If you enable the call and SMS reminder functions, you must keep Bluetooth
connected, and the alarm clock reminder supports offline.
PARAMETER
Screen ruler 0.96inch Bluetooth Bluetooth4.0
Battery type Lithium Polymer waterproof Ip67 waterproof
Charging time 1.5-2 hours capacity 90mAh
Wrist band ruler 245mm*16mm*11.5mm Packing Bracelet+Instructions
MATTERS NEEDING ATTENTION
• Please avoid strong impact, extreme heat and exposure to the sun.
• Do not disassemble, repair or modify the machine by yourself.
• The machine is charged with 5V500mA, and it is strictly prohibited to use over voltage
load power supply for charging.
• The operation environment of this machine is 0-45 degrees. It is forbidden to throw it
into the re to avoid the explosion.
• Please dry the Bracelet with a soft cloth before charging, otherwise it will corrode the
charging contact point and lead to charging failure.
• Do not touch the chemicals such as the gasoline, cleaning solvents, propanol, alcohol
or insect repellents.
• Do not use this product in high voltage and high magnetic environment.
• You may feel uncomfortable if you have sensitive skin or if you wear your bracelet
too tight.
• Please dry the sweat drops on the wrist in time, and the watch strap may cause the
allergic pruritus if it is exposed to soap, sweat, allergen or contaminating ingredients
for a long time.
• If it is used frequently, it is recommended to clean the Bracelet every week. Wipe with
a damp cloth and remove oil or dust with mild soap.
• Do not wear the Bracelet for a hot bath.
• After swimming, please wipe the bracelet in time to keep it dry.
Loading...