Gima EXAMINATION COUCH User guide

PROFESSIONAL MEDICAL PRODUCTS

LETTINO VISITA MEDICA TRADIZIONALE

EXAMINATION COUCH - ALUMINIUM

MANUALE D’USO – ISTRUZIONI E MONTAGGIO
USER MANUAL – ASSEMBLY INSTRUCTIONS

È necessario segnalare qualsiasi incidente grave vericatosi in relazione al dispositivo
medico da noi fornito al fabbricante e all'autorità competente dello Stato membro in cui si ha
sede

All serious accidents concerning the medical device supplied by us must be reported to the
manufacturer and competent authority of the member state where your registered office is
located

M27403-M-rev.1-01.23

27403

Gima S.p.A.

Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]

www.gimaitaly.com

Made in Italy

ENGLISH

INTRODUCTION

For the purposes of Regulation (EU) 2017/745, the product falls under the CLASS I MEDICAL
DEVICES category. We advise you to read the following manual carefully before using the device.

This model has been designed with the aim of limiting any risks to the user in the event of unintentional
impact, by eliminating sharp edges, sharp corners, etc.

SAFETY

Use for purposes other than what it is intended for is not allowed.

The manufacturer declines all responsibility for damage caused by using the product the wrong or im­proper way, or in a way unforeseen in the current manual.

For safety reasons, replace any worn or damaged parts immediately.

MAINTENANCE / CLEANING

The 1-joint examination bed does not require any special maintenance; however, before use, it is neces­sary to check that all the moving parts are tightened correctly.

To clean the bed, a slightly damp cloth can be used; normal detergents can also be used, provided that
they do not contain chlorine and its compounds.

Attention:

• Avoid using hydrogen chloride or bleach.

ASSISTENCE

Should any of the component parts deteriorate beyond general maintenance, contact your distributor,
they will be available to advise you on the most appropriate solution to every kind of problem.

WARNINGS

The information contained in this document are subject to modications without notice having to be
given.

Disposal: the product described in this manual must be sent to specic companies for scrapping.

GENERAL INFORMATION

Examination bed with a frame made of round polished aluminium tubes Ø 30 x 2 mm thick; tted with
an elevating, manually adjustable headrest with 1 joint and 2 sections, and upholstered in soft, easily
washable faux leather. The upholstery consists of: chipboard base with low formaldehyde content, helio­cell sponge with a density of 25 kg/sq m, 4 cm thick, convenient and comfortable.

Unassembled model supplied as a kit

TECHNICAL DATA SHEET

Dimension (L x P x H) cm 176 x 60 x 78

4

Capacity Kg 90

Net weight kg 22.0

Gross weight kg 27.0

Volume M3 0.21

Number of necks 1

Packaging (LxDxH) Cm 151 x 19 x 74

5

ASSEMBLING INSTRUCTIONS

ENGLISH

Symbols:

Caution: read instructions (warnings)
carefully

Keep in a cool, dry place Date of manufacture

Manufacturer Product code

Lot number Consult instructions for use

Medical Device compliant with Regulation
(EU) 2017/745

GIMA WARRANTY TERMS

The Gima 12-month standard B2B warranty applies

Keep away from sunlight

Medical Device