Gima DERMALED MAGNIFYING LAMP User guide

PROFESSIONAL MEDICAL PRODUCTS

MAGNIFIER LED LAMP

1 Cautions:

1) Do not use in wet environments (like the bathroom). Clean your skin before
operating.

2) Turn the power off after operation.

3) Please disconnect the product from power source if it is not being used for a
long period of time. Clean the lamp head and cover it properly for storage.

4) Please wipe the lens with soft lens cleaning paper when cleaning the lens. Do
not wipe with cloth and paper of other materials, otherwise the lens may be
damaged.

5) Avoid water or other liquid contact with the brightness switch when adjusting
the device.

6) Please avoid direct light projection to the eye.

7)

If the external soft power cable is damaged, it can only be replaced by the man-

ufacturer, service agent or personnel with similar qualication in order to avoid

hazard.

8) WARNING “ ” (IEC 60417-6042): The light source can only be replaced

by the manufacturer, service agent or personnel with similar qualication.

2 Instruction

This device mainly detects changes in the human skin surface by examining the
various minor changes in the skin surface. Providing further effectiveness when
operating beauty and care treatments.
The magnifying function of the product can also be used for beauty treatments
such as eyebrow and lips tattooing and eyelash grafting, etc.
The magnifying lens can be use independently with the supporting stand or in
combination with other devices.

The device has an innovative design and elegant prole. It has a safety design

to avoid injury by clamping during operation. The magnifying lens is made of
ultra-white glass with 3 Diopter, better visual effect without phenomenon of dis­tortion.

3 Technical Specications

1) See the table below for input power:

Rated voltage (V) 100~240V
Rated frequency (Hz) 50/60Hz

5.Magnifying Lens:

Installation Parts:

No. Name Qty

1 Column 1
2 Pentagonal base holder 1
3 Five-legged stand 1
4 Pentagonal clamp plate 1
5 Spring pad φ6 5

No. Name Qty

6 Hexagonal screw φ6 5
7 Spring pad φ10 1
8 Flat pad φ10 1
9 Hexagonal screw M10X40 1

2) Rated power and illumination: (illumination tested at a distance of 20cm)
Level 1: 2.5W, 950 LUX
Level 2: 3.5W, 1400 LUX
Level 3: 5.0W, 1900 LUX
Level 4: 7.0W, 2400 LUX

3) Net weight: 12.8kg

4) Gross weight: 15kg

5) Package dimensions: 83.5cm x 69.5cm x 13.5cm

4 Directions of Use:

1) Plug in the cold light lamp to a power source.

2) Turn the power switch to ON, ip the dust cover on the upper lid and aim the

magnifying lens at the skin surface that needs to be examined or undergo
beauty treatment.

3) Adjust the distance between the cold light lamp and skin (10~20cm will be
a best visual effect distance) with proper brightness to achieve the clearest

state. (Total 4 levels for adjustment, specic methods are as follows.)

4) Examine the skin or begin beauty treatment. Brightness can be adjusted dur­ing operation.

Brightness Up Brightness Down

Disposal: The product must not be disposed of along with other domestic waste.

The users must dispose of this equipment by bringing it to a specic recycling point

for electric and electronic equipment.

GIMA WARRANTY TERMS

The Gima 12-month standard B2B warranty applies.

1006A (30736)

Manufacturer
SILVERFOX CORPORATION LIMITED
No. 18, 1st TongLe Road, TangXia Town, Pengjiang District,
JiangMen City, GuangDong Province, China
Made in China

Imported by:

Gima S.p.A.

Via Marconi, 1 - 20060 Gessate (MI) Italy
[e-mail] - [e-mail]

www.gimaitaly.com

M30736-GB-Rev.0-01.21