
Removable Blanket Support VLA 350
VAIMAS SRL
Via Volpato, 39
36035 Marano Vicentino VI
Direttiva 93/42 CEE
Ausili Medici Classe I
Rev. 1,1

GENERAL INFORMATIONS
Aids used to lift blankets or sheets to avoid contact with the patient's body
TECHNICAL DATA AND ADJUSTMENTS
Chromed steel tube structure diameter 18 with clamps
- Height 37 cm
- Depth 38 cm
- East width max. 48 cm
-Weight of structure 1.5 Kg iron, 0.70 Kg in alum.
ASSEMBLY
Equipment: No equipment required
Get rid of the packing the removable Blanket
Support, Incase the ends of the tubes, inserting the
most part
Narrow in the larger one as seen from the side to the
side.
Be sure to insert the grafts until the end
MAINTENANCE
The support does not require any special maintenance except an ordinary
cleaning
USE AND CLEANING
Clean the lump with a slightly moistened cloth with normal, non-abrasive
detergents.
DISPOSAL
Dispose of the device in accordance with applicable environmental and
environmental regulations.
SAFETY
• MAX. 15 Kg
• Use only for the intended uses of the manufacturer.
• Any use other than the one provided by the manufacturer may damage the
health of the patient.
• The manufacturer does not accept any liability for damages caused by improper
or unexpected use
This manual.
• Any modification or replacement must be approved by the manufacturer.
WARNINGS: The information in this document is subject to change without notice.
VAIMAS SRL Via Volpato, 39 36035 Marano Vicentino VI Rev 1,1