PROFESSIONAL MEDICAL PRODUCTS
SUPPORTO A ROTELLE
ROLLING STAND
35148 / 8030421049
Importato da / Imported by:
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
gima@gimaitaly.com - export@gimaitaly.com
www.gimaitaly.com
Made in China
M35148-M-Rev.1-09.20
5
Instructions to User
In order to operate properly and get the best performance, please
read these instructions carefully before using this rolling stand.
This manual describes installation, operation, maintenance,
transportation and storage.
Please keep this manual for future reference!
1 Features
ENGLISH
Silent castors
with brakes
Basket with handle
and hook
Install Basket
Elevation angle
adjustable
Mounting
plate lock
2 Intended Use
This product is intended for transferring equipment such as Patient Monitor, ECG Monitor, etc. to help
doctors work conveniently and effectively.
3 Photos
ENGLISH
6
4 Cleaning and Disinfection
1. Remove the monitor before cleaning the rolling stand.
2. It is recommended to clean the rolling regularly. Only a non-corrosive cleanser is permitted. Dilute
cleansing products as per the manufacturers instructions.
3. Use a cloth with alcohol or your choice of cleanser to wipe the surface of the rolling stand, and dry it
with a clean cloth or leave to air-dry.
5 Dimensions and weight
Dimension: 503*461*H1050 mm
Weight (including package): 10KG
Dimension of package: 780*470*H185mm
6 Transportation and storage
1. Transportation
The rolling stand should be left in original packaging when being transported and kept dry and avoided
bumping.
2. Storage conditions:
The rolling stand should be kept in a dry and well ventilated room free from dust and corrosive gases.
If the stand is being stored in original packaging, stacking height should not exceed four layers, ware-
house should be room temperature.
7 Packing List
Base kit *1 Mounting plate*1 Support pillar *1
Castor *4 Installation tool *1
8 Troubleshooting
Problem Analysis Solution
Support pillar shakes Fixing screws on the base may be loose
Elevation angle can be
adjusted
Adjusting screws on the handle are too
loose / tight
Check the screws
and tighten if required
Adjust the tightness according
to the requirements
9 Installation
Part List
3
1
No Part Name Qty
2
109
4
7
6
5
1 Mounting plate 1
2 Storage Basket 1
3 Support Pillar 1
4 Base 1
5 Castor 4
6 Screw M4-10/12 8
7 Screw M5-16 5
8 Screw M6-25 4
9 3mm spanner 1
10 4mm spanner 1
8
7
Step 1:
Fix four castors into the related holes on the base.
Step 2:
Insert the support pillar into the base
and secure with M6-25 screws.
Insert into the base
Step 3
Assemble the storage basket, and secure with
M4-10 and M4-12 screws according to the following pictures
ENGLISH
Install the spring gasket rst,
then secure with M6-25
M4-12
M4-10
Step 4
Fix the bracket into the support pillar and secure with M5-16 screws.
GIMA WARRANTY TERMS
The Gima 12-month standard B2B warranty applies.
M5-16
Loading...