GIMA S.p.A. EXPORT
1. Adjust the seat height, Sit on, Push down the
front bottom to swivel the top seat.
2. Turn around right or left with one hand holding
on the handle.
3. Hand off the front bottom.
4. Position lock at right angle location.
1. Put two legs cross to form
right angle and screw on the
knob in the center hole.
2. To screw assembly other knobs
with the swivel seat.
3. Adjust the seat height.
4. Select one end for handle
screwed on, and covers up the
small lids on the other end.
Lock Position
Via Marconi, 1 phone +39 02 953854209/221/225
20060 Gessate (MI) - Italy fax +39 02 95380056
www.gimaitaly.com export@gimaitaly.com
CODE 27733 SWIVEL SHOWER CHAIR USER’S MANUAL
WARNING: Be sure to read all information and directions before use.
▲ DO NOT install this equipment without first reading and understanding this instruction sheet.
▲ ALWAYS verify that the device is secure prior to use.
▲ ALWAYS observe the weight limit on the labelling of your product.
▲ ENSURE to follow all instruction required while operating this device.
ASSEMBLY/FITTING:
OPERATION:
Rev.2.02.20
Importato da/Imported by/Importé par/Importado por
Gima S.p.A.
Via Marconi, 1 - 20060 - Gessate (MI) - Italy
Made in China
Loading...