
Gima S.p.A. - Via Marconi, 1 - 20060 Gessate (MI) Italy
gima@gimaitaly.com - export@gimaitaly.com
www.gimaitaly.com
Deambulatore confort con sedile
Comfort Rollator with seat
MANUALE UTENTE
USER MANUAL
M27724-M-Rev.0.09.19
27724
GIMA S.p.A. - Via Marconi, 1
20060 Gessate (MI) - Italy
Made in China

ENGLISH
4
INTRODUCTION
This manual provides the instructions for a correct use of our patient aid or an assistant /
carer. This roller comply with the European Directive 93/42/CEE concerning medical devices.
INTENDED USE
The rollator is designed to be used inside buildings by patients with an impairment to legs.
The devices are intended to provide a support to the body. This aid allow patient mobility
making it easy to walk. They must be used with two arms in order to guarantee safe
operation.
WARNING! The rollator is built for indoor use. If it is necessary to employ the devices outside
we advise to follow the road rules like any pedestrian.
MAINTENANCE
The rollator do not require special care for their ordinary maintenance. We advise to regularly
perform the following checks:
- verify the reliability of different components
- check the correct fi xing of screws and nuts
- test moving parts, apply lubricant if needed
- clean parts with mild detergents (do not use corrosive or harmful chemicals), put it in dry
and ventilated environment.
WARNING! Do not use the equipment in case it is damaged or any component is missing.
Do not use the patient aids for purposes not mentioned in this user manual. Do not cross
obstacles or use the patient aids on uneven surfaces, or wet and slippery. The use of the
device is not recommended for people with poor functionality in the hands and arms.
ASSEMBLY
Step 1: To open folded frame assembly,
follow the direction of the arrows shown in
the picture, lift the seat and place it on the
support; to add the basket lift the seat and
insert the basket in the bracket, after lower
the seat. Position the back handle (7) and
lock it, position the handle with braking
system (2) and lock it at the desired height
shown in the picture, tighten the locknut
Figure 1

5
Step 2: Try to push the vehicle to check the reliability
of the brake, according to their characteristics can be
adjusted as appropriate; commissioning is completed
you can use.
Figure 2
N° Parti PZ
ENGLISH
1 Basket 1
2 Handle with braking sistem 2 (left and right
3 Plastic gasket 2
4 Removable handle 2
5 Hex screw 2
6 Seat 1
7 Back Handle 1
8 Frame assembly 1
GB - Keep away from sunlight GB
- Medical Device complies with Directive
93/42/EEC
GB - Keep in a cool, dry place GB - Product code
GB - Consult instructions for use GB - Manufacturer
GB - Caution: read instructions (warnings)
carefully
GB - Lot number