Page 1
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
gima@gimaitaly.com - export@gimaitaly.com
PROFESSIONAL MEDICAL PRODUCTS
www.gimaitaly.com
SECURITY SYSTEM GIMA - Distruttore di aghi
SECURITY SYSTEM GIMA - Needle destroyer
SYSTÈME DE SÉCURITÉ GIMA - Destructeur d'aiguilles
SISTEMA DE SEGURIDAD GIMA - Destructor de agujas
Manuale d’uso - User manual
Manuel de l’utilisateur - Guía de uso
ATTENZIONE: Gli operatori devono
leggere e capire completamente
questo manuale prima di utilizzare il prodotto.
ATTENTION: The operators must carefully
read and completely understand the present manual
before using the product.
AVIS: Les opérateurs doivent lire et bien comprendre ce manuel avant d’utiliser le produit.
ATENCIÓN: Los operadores tienen que leer y entender completamente este manual antes de
utilizar el producto.
25280
Gima S.p.A.
Via Marconi, 1
20060 Gessate (MI) Italy
Made in Italy
M30801-M-Rev.7.10.18
Page 2
2
Page 3
5
ENGLISH
FEATURES
Product description
GIMA Security System or needle destroyer (Cod. 25820) is conceived to quickly (2-3 seconds) and
easily melt needles with a diameter up to 1,2 mm. It is so powerful that it can reach a temperature of
1000°C and destroy any kind of virus and bacterium. It can also melt needles with larger diameters (up
to 1,6 mm), however this operation takes a longer time (the melting system is patented).
GIMA needle destroyer is extremely solid; it weighs more than 4 Kg and has been built with highquality
materials, according to IEC 62-5 standard in force for electro-medical equipment, ensuring a very long
lifetime. It is equipped with a withdrawable drawer for the collection of wastes and a practical handle
for an easy transport.
Technical features
Dimensions 22x14x119 cm
Weight 4 Kg
Power supply 220V ~ 50Hz. 400W
Melting temperature 1000°C
Fuses 2x2,5 AT
Self-resetting thermal fuse It is located in the transformer and switch the power supply off
Field of application, improper use
GIMA needle destroyer is conceived to destroy hypodermic needles and it cannot be used for purposes
not in compliance with its features.
when a temperature of 100°C is reached inside the transformer.
PRESCRIPTIONS
Accident prevention
Do not introduce your hand in the compartment inside which the melting waste collection drawer
slides, according to warning sign applied to the product.
Page 4
ENGLISH
The product shall be used by qualied personnel only.
Do not use the equipment in case it is damaged. Apply to your retailer.
Avoid precarious repairs. Repairs shall be carried out with original spare parts only, which shall
be installed according to the intended use.
Do not carry out maintenance or cleaning operations when the equipment is connected to
the mains.
Since the product is made of corrosion-proof materials suitable for the enviromental conditions foreseen
for its normal use, does not require special care, however it is necessary to store it in a closed place making sure that is protected from dust and dirt to assure its hygenic conditions. Moreover, it is recommended to store the product in a place which can be reached easily by the personnel in case of necessity.
UNPACKING
Unpacking
Always remember that packing elements (paper, cellophane, stitches, adhesive tape, etc.) can
cut and/or hurt if they are not carefully handled.
They shall be removed with adequate means and shall not be left at the mercy of irresponsible
persons; the same is valid for tools used to remove packages (scissors, knives, etc.).
After opening the packages, rst of all it is necessary to check all pieces and parts composing the product. Check that they are all present and in perfect conditions.
INSTALLATION
Installation and connections
The installation of GIMA needle destroyer is very simple. Lay the equipment on a stable base and plug
in a grounded 220 Volt ~ 50Hz socket.
Before switching on, make sure that the drawer for waste collection is inserted into the corresponding
compartment.
6
OPERATION
Operating instructions
After plugging in, it is possible to switch the equipment on by means of PUSH button of the device.
Insert the needle into one of the two melting holes, keep the syringe in vertical position, press pushbutton PUSH and keep it pressed, the START led lights up and shows that the equipment is working and
ready to melt the needle.
It is advisable to guide the needle into the melting hole by slightly rotating it. This rotation makes melting
easier.
In case during melting the needle comes off the syringe and it is blocked in one of the two holes, make
use of tweezers (not included) to recover the needle and repeat the operation.
Stop and switching off
After melting has been concluded, release the PUSH button and the START led is switched off, removing voltage of device.
MAINTENANCE
General maintenance instructions
The product has been conceived to last forever; it is resistant to most part of chemicals except for
methyl ethyl ketones (M.E.K.), diluents and nail polish removers.
Routine maintenance
GIMA SECURITY SYSTEM is solid and easy to use, for this reason it does not need particular maintenance operations. It will be sufcient to remove dust and dirt by means of a soft cloth dampened with
alcohol.
Page 5
7
ENGLISH
It is recommended to carry out maintenance operations when the equipment is disconnected
from the mains.
Scheduled maintenance
Every 4000 needles it is necessary to replace the melting charcoals A. To replace them, proceed as
follows:
1) Disconnect the mains plug.
2) Unscrew the 4 screws located on the side and lift the cover.
3) Remove the two black plugs B on the drawer and introduce a small screwdriver into the holes to
unscrew the screws holding the charcoal rollers.
4) Replace the charcoals A and screw down again. Replace the cover.
Symbols
Product complies with
European Directive
Read instructions carefully Manufacturer Keep in a cool, dry place
Please read instructions carefully Date of manufacture Keep away from sunlight
Lot number
Product code
Products should not be
disposed of with household
waste
Disposal: The product must not be disposed of along with other domestic waste. The users must
dispose of this equipment by bringing it to a specific recycling point for electric and electronic
equipment. For further information on recycling points contact the local authorities, the local
recycling center or the shop where the product was purchased. If the equipment is not disposed
of correctly, fines or penalties may be applied in accordance with the national legislation and
regulations.
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product.This product meets high qualitative standards both as
regards the material and the production.
The warranty is valid for 12 months from the date of supply of GIMA.
During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the defected parts due to production reasons.
Labor costs and personnel traveling expenses and packaging not included.
All components subject to wear are not included in the warranty.
The repair or replacement performed during the warranty period shall not extend the warranty. The warranty is void in the following cases: repairs performed by unauthorized personnel or with non-original
spare parts, defects caused by negligence or incorrect use. GIMA cannot be held responsible for malfunctioning on electronic devices or software due to outside agents such as: voltage changes, electromagnetic elds, radio interferences, etc. The warranty is void if the above regulations are not observed
and if the serial code (if available) has been removed, cancelled or changed.
The defected products must be returned only to the dealer the product was purchased from. Products
sent to GIMA will be rejected.
Loading...