GilAir Plus PN 360-0132-01 Quick Start Manual

Scan QR code to download software
and RF Regulatory Certifications

Quick-Start Guide

GilAir Plus Basic, PN 610-0901-01-R
GilAir Plus Datalog, PN 610-0901-02-R
GilAir Plus STP, PN 610-0901-03-R
GilAir Plus Datalog w/Bluetooth, PN 610-0901-05-R
GilAir Plus STP w/Bluetooth, PN 610-0901-06-R

1000 112th Circle N, Suite 100 • St. Petersburg, FL 33716 USA

[phone] / [phone]

www.Sensidyne.com •[e-mail]

REF 360-0135-01 (Rev E)

© 2010 Sensidyne, LP

Page 2

Key sequences within this guide indicate
keys using the names and label styles below:

References to pump displays and menu screens use
the names and label styles below:

ESC

POWER/ENTER

Constant
Flow Run
Menu

NAV

INC/DEC

Main Menu

Cautions:

Intrinsic Safety: The pump is intrinsically safe for use in all areas; please refer to the user manual for special conditions.
Batteries: Do not replace or charge batteries in hazardous areas. Charge batteries completely before each use. Special

discharge or battery conditioning is not required.
Charger: Use only the specified dock to charge pump within specified temperature range.
(Part numbers 615-0902-01-R, 615-0902-03-R,615-0902-05-R,615-0905-01-R,615-0905-03-R,615-0905-05-R

How to Use this Guide

This Quick-Start Guide introduces basic operation and use of the GilAir Plus air sampling
pump. Operation Manual (PN 360-0132-01) includes complete operation instructions,
options, and notes. Always adhere to warnings, instructions, and procedures included in
the Operation Manual.

Keypad Pad Overview

Operation Guide

Power Pump On and Off
Pump should be fully charged before use.

Power Pump On

Press and hold the POWER/ENTER key until the pump
displays the Start up Screen

© 2017 Sensidyne, LP Gilian GilAir® Plus – Personal Air Sampling Pump – Quick-Start Guide

Power Pump Off

When pump is not running or in a program pause,
press and hold POWER/ENTER key.
Continue to hold POWER/ENTER until Power down
window appears and countdown completes.