GT-1050A 2 GHz to 50 GHz
Microwave Power Amplifier
Operation Manual, Part Number 34817, Rev. C, March 2011
Giga-tronics GT-1050A Microwave Power Amplifier
Warranty
Giga-tronics GT-1050A Microwave Power Amplifiers are
warranted against defective materials and workmanship for
one year from date of shipment. Giga-tronics will at its option
repair or replace products that are proven defective during
the warranty period. This warranty DOES NOT cover damage
resulting from improper use, nor workmanship other than
Giga-tronics service. There is no implied warranty of fitness
for a particular purpose, nor is Giga-tronics liable for any
consequential damages. Specification and price change
privileges are reserved by Giga-tronics.
All technical data and specifications in this publication are subject to change without prior notice and do not
represent a commitment on the part of Giga-tronics, Incorporated.
Declaration of Conformity on file. Contact Giga-tronics at the following;
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
Telephone: 800.726.4442 (only within the United States)
925.328.4650
Fax: 925.328.4700
Operation Manual, Part Number 34817, Rev. C, March 2011
Giga-tronics GT-1050A Microwave Power Amplifier
TPCI
Number
TPCI Issue
Date
Date Entered
Comments
Record of Changes to This Manual
Use the table below to maintain a permanent record of changes to this document. Replacement pages will be
issued as a TPCI (Technical Publication Change Instruction).
Operation Manual, Part Number 34817, Rev. C, March 2011
Giga-tronics GT-1050A Microwave Power Amplifier
Table of Contents
CHAPTER 1SAFETY AND MANUAL CONVENTIONS .................................................................................................... 1
1.1 Personal Safety Alert ....................................................................................................................................... 1
2.1.1 Features and Benefits of the GT-1050A Microwave Power Amplifier ..................................................... 3
2.2 Controls, Indicators, and Connectors .............................................................................................................. 4
2.3 Receiving and Inspection ................................................................................................................................. 6
2.4 Prepare the GT-1050A for Use ........................................................................................................................ 7
2.4.2 AC Power Requirements........................................................................................................................... 7
2.5 Shipping, Repair, and Calibration .................................................................................................................... 7
2.5.1 Shipping the GT-1050A ............................................................................................................................. 7
4.2.1 Equipment and Material ........................................................................................................................ 15
Figure 3: DC Power Input ........................................................................................................................................... 5
Figure 4: DET Connector ............................................................................................................................................ 5
Table 3: Receiving and Inspection of the GT-1050A .................................................................................................. 6
Table 4: Operate the GT-1050A ................................................................................................................................. 9
Table 5: Frequency Range ....................................................................................................................................... 10
Table 6: Output Power ............................................................................................................................................ 10
Table 7: Gain Flatness .............................................................................................................................................. 11
Table 8: Input and Output VSWR ............................................................................................................................ 11