Page 1
*PARTY TENT CANOPY NOT INCLUDED
Canopy Sidewalls
Owner’s Manual
(for use with Gigatent’s “The Party Tent”)
Model # WL004 / WL004W
20’ W x 77” H (Long Side Walls)
10’ W x 77” H (Short Side Walls)
Warning
The canopy is very susceptible to damage from high winds and every precaution
should be taken to prevent damage to the canopy and frame. This is extremely
IMPORTANT
We strongly suggest setting up your new
canopy walls before initial use to insure that all
parts are present and to familiarize yourself
with the canopy wall’s assembly. This will have
a great effect on how well enjoy your product.
For questions or concerns call Gigatent at our Toll Free Number:
877-836-8701 Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST or email us at customerservice@gigatent.com.
For replacement parts, please login to our website at gigatent.com and click the link “replacement parts”.
important when the canopy is being used on a hard surface such as a driveway or
concrete. Weights such as sandbags or bricks can be used in place of stakes. In
very heavy torrential rain care must be taken to insure that water does not collect
on the canopy top as this added weight will cause damage to the frame. The
canopy should NOT be left without first detaching the canopy from the frame and
allowing it to fall INSIDE the frame to reduce the risk of collecting rain water, or
the canopy can be taken down.
Page 2
ASSEMBLY INSTRUCTIONS
Step 1
1) Attach the long sided wall to the assembled Party Tent canopy by running the Velcro top edge of the wall to the
bottom edge of the canopy eave (Figure A).
2) Repeat step for the opposite long sided wall.
Step 2
3) Attach the short sided wall to the Party Tent canopy by running the Velcro top edge of the wall to the bottom
edge of the canopy eave. Secondly, Velcro attach both corner edges of the short walls along the corner edges of the
long walls (Figure B).
4) Repeat step for the opposite short sided wall.
A
Attach
Velcro
Attach
Velcro
B
Step 3
5) Attach corners of the walls to leg fame by looping the the Velcro straps together. Be sure to attach all the straps of
each wall to the frame (Figure C).
6) Repeat step for all corners of walls.
Attach Velcro Loops to Corner Legs from Inside of Canopy.
C
Page 3
Care
Ultra Violet (UV) Exposure
Your canopy walls are made of UV
resistant polyester fabric which is
resistant but NOT impervious to the
damaging effects of long term sun
exposure. We DO NOT suggest long term
set up of ANY of our products as this will
severely damage the tent fabric.
Seam Sealing
Gigatent suggests that at a MINIMUM the
seams around the windows should be
sealed using a product like McNetts Seam
Sure to prevent moisture from coming
through the needle holes. Follow the
manufacturer's instructions when
applying seam sealer.
Structural Integrity
Although the canopy walls were
constructed to rigid specifications
periods of wind and soaking rain may
loosen the stakes and guylines to the
point of allowing the rainfly to flap. This
can in turn cause the poles to loosen
weakening the overall structure.
Loosening of the rainfly can also create
pockets that can collect water which can
lead to pole failure. To insure that this
does not occur take care during windy or
rainy conditions that all of the stakes and
guylines are secure and tight.
Storage
DO NOT under any circumstances store
your canopy and canopy walls wet or
damp. Mildew will quickly destroy a tents
waterproof coating. Allow your tent to
dry and then store in a cool dry place.
Washing Your Tent
NEVER machine wash the canopy walls as
this can cause damage to the waterproof
coating. Hand wash with a mild soap and
rinse with clean water and allow to
COMPLETELY dry before storing. An
extremely dirty tent can be set up and
washed like a car or it can be washed in a
bathtub using your hands to agitate the
water or a soft brush.
Manufacturer’s Warranty
Warranty covers product to be free from defects in material and workmanship for 14 days after date of purchase.
Warranty does not cover natural breakdown of materials that occur inevitably with extended use (e.g., damage, exhausted zippers, defects caused by accident, abuse,
alteration, animal attack, storm damage, misuse or improper care.
This product is covered for 14 days from date of purchase. Please check all contents to verify product has no missing or broken parts. Gigatent will mail replacement parts
free of charge within the 14 Day Manufacturer’s Warranty by calling 1-877-836-8701 or emailing customerservice@gigatent.com. We highly recommend logging on to our
website at www.gigatent.com should you need customer service.
WARNING:
This product was not designed to be left out in the sunlight for extended periods of time. Prolonged UV exposure will rapidly break
down the color and integrity of this product. UV damage is not covered under our warranty.
WARNING : NEVER LEAVE BURNING FIRE UNATTENDED
Wind may topple product. Use extra caution.
Keep all Flame and Heat away from product.
THIS PRODUCT IS NOT FIRE PROOF.
IF LEFT TOO CLOSE OR ON OPEN FLAME THE PRODUCT WILL BURN OR BE SEVERELY DAMAGED.
CAUTION: Use caution when using propane stove on this product. Unintended fire my result in damage of product or bodily harm.
Manufactured in China for
Gigatent
55 Haul Rd
Wayne, New Jersey 07470
www.gigatent.com
Page 4
Loading...