BT014
Recon2
8543'x 'x "(H)
OWNER'S MANUAL
Assembly instructions
IMPORTANT
We advise you, to assemble the tent
once before going camping to assure
that all parts are present, and become
familiar with the assembly of the tent.
X14
Fiberglass Pole
{
X2
Step "1" tent setup
(To prolong the life of the tent floor, select a level, clean area for the campsite)
1)Spread the tent body on the ground
2)Fully open all poles
3)Thread poles thru poles sleeves at top of tent ( figure A)
4)Insert poles into ( figure )the the pocket B
5)Attach clips to poles ( figure C)
6)Stake the corners down ( figure E)
A
B
C
D
Step ''2'' attach the rainfly
8)Drape fly over tent
9)Attach Velcro to poles (figure E)
10)Stake e/strings corners of fly ( figure F )
E
INSIDE
F
Step "3" extra stability
11)Secure tent by staking out the corner guy lines.(figure G)
G
Replacement Parts
MODEL:BT014
Description Qty.
Inner Tent
1.
2.
Fiberglass Pole
3. 2
4. Steel Pole
Steel Peg 6mm7"
5. 14
P/string
6.
*Review your parts list above; to make sure all parts listed above have been included on your package.
1
1Rainfly
4
Description Qty.
Plastic Mold
7.
8. Carry Bag 1
9. Pole Bag 1
10. Peg Bag 1
Owner's Manual
11. 1
Box
12. 1
WARNING!!!
KEEP ALL FLAME AND
HEAT SOURCES AWAY
FROM THIS PRODUCT
FABRIC.
This
flammability
requirementsofCPAI-84.
Thefabricmayburnifleft
in continuous contact
with any flame source.
The
foreign substance to the
product fabric, may
render the flame resistant
product meets the
application of any
EXTREME
CAUTION!
Never use any fuel burning
oxygen consuming device,
or any device that produce
any fumes, including stoves,
lanterns, candles, hibachis,
or heaters in or around
your product. This could
result in carbon monoxide
poisoning, injury and/or death.
properties ineffective.
manufactured in our state of the art factory in china
THANK YOU
FOR PURCHASING A SUPERIOR QUALITY MY MASTERPIECE WILDCAT MOUNTAIN.
THIS TROUBLESHOOTING GUIDE
IS DESIGNED TO GIVE YOU YEARS OF FUN AND ENJOYMENT FROM YOUR CAMPING EQUIPMENT.
Troubleshooting Guide
PROBLEM SOLUTION
1.
CONDENSATION
2.
FLOOR
CONDENSATION
3.
MILDEW
4.
REPAIRING A
TEAR
5.
FAULTY ZIPPER
6.
SEAM LEAKAGE
This is caused by lower temperatures on the outside of the tent combined with body heat
on the inside of the tent. Leave the doors and windows open to reduce condensation
moisture.
To prevent floor condensation use a ground cloth. Placing a ground cloth under your
product will prolong its life. Ground cloth size should be slightly smaller than product
floor size.
To avoid mildew, put your tent away from wet or damp. However, if mildew occurs,
use a soft bristle brush or sponge with mild dish washing soap to clean.
Let the tent dry in the sunlight and apply seam sealer compound on outside seams.
For small tears use a self-adhesive patch kit.
We recommend a canvas or awning repair shop for larger tears.
All of our tents are manufactured with zippers, which if the zipper separates, you can fix
it by moving the slider to the beginning of the zipper tape and re working the zipper,
if this doesn't work, you may order a replacement zipper from our parts department.
A local canvas or awning repair shop in your area may then install the zipper.
To protect against seam leakage, apply a generous amount of seam sealer
On all interior seams.
7.
REMOVING
STAKES
Stake should be removed with another stake, hammer or stake puller, but never by pulling
on the tent. Avoid staking the tent so tightly that it stretches the fabric, over stretching may
cause stake loops to tear. Troubleshooting Guide
WARNING
WARNING: KEEP ALL FLAME AND HEAT
SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of
CPAI - 84. The fabric may burn if left in continuous
contact with any flame source.
The application of any foreign substance to the
product fabric may render the flame resistant
properties ineffective.
DO NOT...
1.Do not pitch tent near an open flame.
2.Do not leave campfires unattended.
3.Do not allow CHILDREN or ADULTS to use
lighted candles, matches or other flame
sources in or near tents.
4.Do not use heating, lighting or cooking
equipment with open flames in or near tents.
5.Do not use fuel burning/oxygen consuming
devices(i.e.heaters,lanterns,or other flame
sources)inside your tent at any time.
6.Do not spray the tent with insecticide.
7.EXTREME CAUTION: Never use any fuel
burning/oxygen consuming device, or any device
that produces fumes (including stoves, lanterns,
candles, hibachis, or heaters) in or around your
tent. Inhalation of fumes may result in carbon
monoxide poisoning, injury and/or death.
DO ...
1.Always extinguish campfire before leaving area.
2.Exercise care when using electricity and lighting
in and near tents.
3.Disassemble and store tent properly after camping
to ensure the tent's longevity.
4.Always use a hammer/mallet when driving stakes
into the ground.
CARE
Your tent is made of UV-Polyester fabric which
is highly resistant to the sun's UItraviolet(UV) light.
No tent can with-stand prolonged exposure to
sunlight.
Sealing of Seams
Although extreme care is taken in the process of
the stitching and the application of tape seaming.
The seams may require from time to timeadditional
application of a seam sealer spray.
We do however request that all seams are treated/
sparyed annually.
On application of the spray, spray the outside seam
(Ensure that you are in a ventilated area when
applying)
Storage
Tents must never be rolled up or packed while damp
or wet, as mildew will form within a few days.
Allow tent to dry completely before rolling up and
storing away.
Structural lntegrity
Although the tent is constructed to rigid
specification, periods of wind and soaking rain may
loosen the stakes and cause the uprights poles to
loosen.
This will weaken the rigidity of the overall structure,
therefore ensure that the tent storm ropes are at all
times taut and correctly pegged into the ground.
(This will prevent water pockets collecting in the roof,
the weight of which may cause the tent poles to
collapse)
WARRANTY
Warranty Term :
5 years from the date of purchase
What Is Covered:
Warrants to the original purchaser that its products are free from defects in material and workmanship.
What Is Not Covered:
Shall not be responsible for the natural breakdown of materials that occurs inevitably with extended use(e.g.,
Ultraviolet(UV)light damage on tents, exhausted zippers), or defects caused by accident, abuse, alteration,
animal attack, storm damage, misuse or improper care.
What Will Do:
If after inspection we find that a product failed due to a manufacturing or material defect,we will repair or
replace the product, at our option, without charge.
How To Obtain Warranty Service :
Return the product, freight prepaid, to the Customer service department. For return authorization
e-mail our office and obtain an Authorization number, Authorization numbers are valid for 30 days from the
date of issuance, and must be obtained within 30 days of ship date. Returns will be handled in timely matter
Collect shipments or shipments without return authorization will not be accepted.
GIGA TENT
Repairs:
If your Product needs service or repair due to normal wear and tear, animal attack, accident or some other
reason that is not covered under the warranty we will provide the necessary service for a reasonable charge,
plus shipping and handling. We require that products accepted for any repair be properly cleaned
according to our recommended care instructions. Please send your product or component that requires
repair (e.g. tent fly), postage prepaid, along with a description of what needs attention.
most
REPLACEMENT PARTS:
Replacement parts may be ordered with consumer service at 1- 877 - TENTS 01 (873-8601)
We accept Visa Master Card and American express.
WWW.GIGATENT.COM
Loading...