Congratulations on your purchase of the Siemens Gigaset SL 30 telephone system!
This phone´s 2.4 GHz frequency and high-speed digital voice encoding provide reception and voice clarity that is superior to other cordless phones. And, its digital
spread spectrum technology will provide you with secure, private conversations.
DO NOT RETURN
THIS PRODUCT TO THE
STORE!
Please read the following important information.
For Siemens Customer Care, product operation
information, or for problem resolution, call toll-free
1-888-777-0211
9 a.m. to 8 p.m. Central Standard Time EVERY DAY
s
s
ss
www.my-siemens.com
Register now!
It’s fast progress in the world of communication. Register today for the world of Siemens mobile on „my-siemens.com“ and stay current with customized information on Siemens latest
products and applications.
Please go to: www.icm.siemens.com/register
3
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
–
–
–
a
Handset Diagram
Handset Diagram
4000CoU.fm
05.02.03
Status LED (light)
Lights up during a call;
Flashes for:
– Incoming calls
– New messages
– Alarm calls, appoint-
ments, anniversaries
Signal strength
Navi key
Ta lk k ey
Accept call
Dial number
Switch from handset to
speakerphone.
Ñ ¸e
Annabella
07.05.0301:13pm
{
MENU
Open directory
Key 1
(Programmable) Hold
down to select Answ.
machine/telco voice
mailbox
Star key (*)
Hold down to turn on
nd off the ringer
Handsfree key
witch from handset to
andsfree talking.
Microphone
Socket
– for Headset
–MP3-Player
Answering machine symbol if registered to SL 3501
Display (display field)
Charging status
= empty
U full
flashes: Battery low
Current functions
and display keys
With the display keys, you
have access to the current
functions.
End call and On/
Off key
– end call
– cancel function
– back one menu level
(press briefly)
– return to idle state
(hold down)
– on/off in idle status
(hold down)
Pound key
Hold down to turn on and off
the keypad protection
Caller list
Access to message lists
Memory key
Accesses speed dial
numbers
Using the Navi Key and Soft Keys
Soft keys
Navi key
4
With the soft keys you can
carry out functions that can
also be partly controlled with
the navi key.
The side of the navi key which you must press is indicated in the operating instructions by arrows:
F/ G (left/right)
E/ D (top/bottom)
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Important menus
4000CoU.fm
05.02.03
Handset Diagram
MENU
Room Mon.*
Appoint./Clock
Sound Settings
H/Set Settings
Base Settings
Ans Machine
Handset Volume
Set Ring Tone
Alarm Tones
Silent alert
[
Display symbols
D
New Entry
Anne
Barbara
Chris
:
Edit Entry
Delete Entry
Send Entry
Delete Log
Send Log
Available Memory
MENU
The following symbols appear above the display keys depending on the situation:
Display keys
MENU
Z
W
{
Í
Meaning
Menu key: Activates the main menu when the phone is idle. During a call, it
activates a menu for the particular situation.
Selects and confirms the menu function.
Ends and saves an entry.
Delete key (Backspace): Deletes characters from right to left.
Automatic redial key: Opens a list of the last five numbers dialed.
One menu level back, cancel
5
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Safety precautions
*
Safety precautions
Only use the power supply unit supplied as indicated on the underside of the
$
device.
Only insert approved rechargeable batteries of the same type. Never use ordi-
nary (non-rechargeable) batteries as they may pose a health hazard or cause injury.
!
4000CoU.fm
05.02.03
‹
Œ
Make sure the rechargeable battery is inserted the right way round
Use the battery specified in these operating instructions
The phone may affect medical equipment so always switch your phone off before
entering hospitals or doctors’ practices.
The handset may cause an unpleasant humming noise in hearing aids.
Do not operate the phone in places where there is a risk of explosion (such as paint
workshops).
The handset is not splash-proof (see page 33).
Drivers must not use the phone while driving.
The phone must be switched off at all times in an aircraft. Make sure it cannot be
switched on accidentally.
ƒ
Emergency numbers cannot be dialed if the keypad lock is activated!
*. see also page 36
6
If you give your Gigaset to someone else you should also give them the operating
instructions.
Dispose of batteries and the phone carefully. Do not pollute the environment.
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Connecting the charging unit
● Insert the
small connector of the
mains cable
into the jack,
● Turn the con-
nector in the
direction of
the arrow,
● Plug the
power supply
unit into the
socket.
4000Co.fm
05.02.0
Plug-in power
supply unit
(VAC 110/60Hz)
with mains cable
Only use the plug-in power supply unit supplied (as identified under the charging unit).
Range and reception strength
The base station range is approx. 1000 feet outdoors and up to
150 feet indoors. The receive strength display shows the quality of the
radio contact between the base station and the handset:
Gigaset SL 30 handset, one battery, charging unit, belt
clip, operating instructions.
Inserting the battery
4000Co.fm
05.02.03
MENUOpen the menu.
D H/Set Settings[
ееееееееееееееееееееееееееееееее
D Reg. Handset[
ееееееееееееееееееееееееееееееее
D [Select base ( , , or ).
o[Key in PIN and confirm (as supplied: 0000):
● Insert the battery, as shown above.
● Place cover and push gently upward until it clicks
into place (the unit is shipped with the battery cover
off).
To open, press the grooved area on the cover and slide
back.
● Use only a rechargeable NiMH battery. Do not
use Lithium or non-rechargeable battery.
● Never use non-Siemens charging units as the-
se can damage the battery.
Registering the handset
Step 1:
Select and confirm.
Select and confirm.
Base 1Base 2Base 3Base 4
Regstr.Procedure Base 1
is displayed, for example.
8
Step 2:
Press down the key on the back of the Gigaset SL3501
base and keep it pressed down for a while. The hand-
set will be automatically assigned the next free internal
number (1–4). The internal number 4 will be overwrit-
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Press Keys:
ten if all positions are already occupied.
The handset will return to the idle condition following
successful registration. The internal number
(e.g.“INT1”) is displayed.
GigasetOn the base station or base telephone
4000Co.fm
Preparing the handset
05.02.03
4010/4015
4210/4215
Hold down the key on the underside of the
base station.
Charging the battery
Leave the handset for approx. 5,5 hours in
the charging unit to charge the battery, as it
5,5
is supplied uncharged. The charging status
icon flashes on the handset to indicate that
the battery is being charged:
See the appendix for a list of recommended batteries.
2
= Batt. flat (symbol flashes) V Batt.
1
e Battery
● The battery heats up during charging. This is nor-
/3chargedU Battery full
mal and not dangerous.
● Removing the battery unnecessarily may cause the
wrong charging status to be displayed.
/3charged
9
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Preparing the handset
Press Keys:
Attaching the belt clip
Push the belt clip onto the back of the handset until the
lugs at the side click into place.
Turning Handset On/Off
4000Co.fm
05.02.03
aTo turn handset on/off, hold down the End key – you
will hear a confirmation beep.
The handset is turned on as soon as you insert the
battery and place the handset in the charging unit.
Turning Keypad Lock On/Off
You can disable the handset keys when carrying the
unit in your pocket or bag. This protects from accidental key presses. If there is an incoming call, the key lock
is automatically turned off and turned back on after the
call has ended.
c
ªTo turn on/off, hold down the keypad lock/the pound
Accepting a call: Press the Talk key.
key – you will hear the confirmation beep
Note: 911/Emergency calls can not be made
when the key pad is locked.
*
!
10
* Confirmation beep = rising tone sequence,
Error beep = falling tone sequence.
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Press Keys:
Setting the date and time
You need to set the date and time so that the time that
messages and calls are received is shown correctly.
MENUOpen the menu.
4000Co.fm
Preparing the handset
05.02.03
D Appoint./Clock[
ееееееееееееееееееееееееееееееее
D Date/Time[
ееееееееееееееееееееееееееееееее
D
D
Save[
ееееееееееееееееееееееееееееееее
Select and confirm.
Select and confirm.
The current setting is shown.
Enter the date
Enter the month/day/year.
In this case 05-06-03. e. g.
Go down one line.
Enter the time
Enter hours and minutes.
In this case 19:05
] ¬ Þ ¢
e. g.
Go down one line.
Select the display mode
use the left side of the control key to select the 12hour mode (am / pm) (default) or the 24-hour mode.
Save the settings.
Þ¢Þ£Þ^
Changing the display language
MENUOpen the menu.
D H/Set Settings[
ееееееееееееееееееееееееееееееее
D Language[
ееееееееееееееееееееееееееееееее
D[Select the language you want and confirm.
Confirm the function.
The current language is marked with a 9.
11
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Making calls
Press Keys:
Making calls
Making an external call
oEnter the telephone number. If you make a mistake
use the
cPress the talk key.
aPress the end call key to end the call.
● You can also press the talk key c first and then
● You can cancel the dialing operation by press-
● You can insert a pause: After entering the prefix,
X key to correct individual digits.
enter the telephone number - each digit will be dialed immediately.
ing the end call key
open the menu using the display key MENU and
select “insert pause”.
4000Co.fm
a
.
05.02.03
Intercom Call
or
Making intercom calls
F
D E cSelect the handset you want and press the talk key.
e. g. ŸEnter the internal number of the handset.
or
Open the list of internal users. Your own handset is
identified by “<".
c
or «All handsets are called.
aPress the end call key to end the call.
Answering a call
Your telephone will ring (ringing tone) and the status
LED will flash.
c
/
k
u
Press the talk key or handsfree key.
or
Simply remove the handset from the charging unit
(factory setting: “Auto answer”).
Ö
12
Gigaset SL 30, USA eng, A31008-L030-U102-1-7619
Press Keys:
Handsfree talking
Handsfree talking when dialing
oDial the telephone number.
uPress the handsfree key.
When handsfree talking is activated, the hands-
free key u and the status LED are lit.
Handsfree talking during a call
uActivate handsfree talking.
To s e t t h e vo l u m e :
Press the handsfree key uonce more.
4000Co.fm
05.02.03
Making calls
F GRaise or lower the volume.
SaveSave the volume level.
cChange from handsfree talking to the handset
aEnd the call.
If you want to place the handset in the charging unit during a call (if for example the battery is low), keep the speakerphone key upressed while placing it in the charger.
Muting the Handset
You can mute your handset during an external call to
talk privately to another person in the room. The external caller cannot hear your conversation. You cannot
hear your caller either.
FWhile on an active call, Press Int on the navi key to
mute the microphone – the call is placed on hold and
the external caller will hear music.
ÎTo return to the external caller, press the escape key.
13
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.