Gigaset 1054 Operating Instructions Manual

Gigaset 1054: A30852-X954-B101-1-76191054TIT.FM28.10.96

s

Operating Instructions

8 mobile units

can be connected

2 non-cordless terminals

can be connected

Cordless Digital DECT Telephone System

Gigaset 1054

Note:

Please read these instructions, with their safety
precautions, before using this equipment!

Gigaset 1054: A30852-X954-B101-1-76191054TIT.FM28.10.96

U5

1054K10.IVZ

Table of Contents

1

Gigaset 1054, GBR.: A30852-X954-B101-1-7619

28.10.96

Important Tips

Safety Precautions ...................................................................................................................... 6

CE Mark of Approval and Certification for the Main Connection and Telephone Systems .........6

Putting Into Service

Important Information ................................................................................................................. 7

New Features for Telephone Service .......................................................................................... 7

Step by Step Instructions ............................................................................................................ 8

System Code ............................................................................................................................... 8

Base Station Gigaset 1054

Contents of Package ................................................................................................................... 9

Special Accessories ..................................................................................................................... 9

Tips for the Most Advantageous Installation of the Base Station ............................................. 10

Mounting / Connecting the Base Station .................................................................................. 11

Connection Options at the Base Station ................................................................................... 13

Status of the Base Station Upon Delivery ................................................................................. 13

Mobile Unit

Tips for Individuals with Hearing Aids ....................................................................................... 14

Installing and Charging the Rechargeable Batteries .................................................................. 14

Mounting the Carrying Clip on the Mobile Unit ......................................................................... 15

Important Tips for Using the Rechargeable Batteries ............................................................... 15

Standard Mobile Unit

Displays ..................................................................................................................................... 16

ON OFF, LOCK Status .............................................................................................................. 17

Switching the Status ................................................................................................................. 18

Registering a Standard Mobile Unit at the Base Station ........................................................... 19

Viewing and Setting the Dialing Mode ...................................................................................... 20

Comfort Mobile Unit

Display ....................................................................................................................................... 21

ON, OFF, LOCK Status .............................................................................................................. 22

Switching the Status ................................................................................................................. 23

Registering the Comfort Mobile Unit at a Base Station ............................................................ 24

Viewing Your Own Internal Number ........................................................................................ 25

Viewing and Setting the Dialing Mode ...................................................................................... 26

Non-Cordless Devices

Connection Jacks ...................................................................................................................... 27

Connecting Telephones ............................................................................................................. 27

Connecting Non-Cordless Devices (other than telephones) ...................................................... 27

Examples of Connections for Door Interphones via TFE (entrance telephone) ......................... 28

Introduction
Overview Figures

2

1054K10.IVZ

Table of Contents

Gigaset 1054, GBR.: A30852-X954-B101-1-7619

28.10.96

Operation with Standard Mobile Unit

Standard Settings

Saving / Changing the System Code ......................................................................................... 30

Enter / Change Mobile Unit PIN ................................................................................................ 31

Setting Tone Ring of the Mobile Unit ........................................................................................ 32

Activate / Deactivate Automatic Line Seizure ............................................................................ 33

Activate / Deactivate Automatic Call Pickup .............................................................................. 33

Activate / Deactivate Call Pickup ............................................................................................... 34

Incoming Calls

Accept/Terminate Calls .............................................................................................................. 35

Call Pickup ................................................................................................................................. 36

Answer Call Waiting During an Internal Call .............................................................................. 37

Answer Call Waiting During an External Call ............................................................................. 37

Outgoing Calls

External Dialing, Using Dialpad .................................................................................................. 38

Using the Dialpad for External Dialing as En-Bloc Dialing .......................................................... 39

Number Redial ........................................................................................................................... 40

Number Redial as En-Bloc Dialing ............................................................................................. 40

Internal Call to Another Mobile Unit or Auxiliary Device ............................................................ 41

Internal Dialing with Collective Call ........................................................................................... 41

Dialing Speed Dial Numbers ...................................................................................................... 42

During the Call

Placing a Call on Hold ................................................................................................................ 43

Setting the Handset Volume ...................................................................................................... 44

Mute Feature ............................................................................................................................. 44

Temporary Switch to Tone Dialing ............................................................................................ 45

Speed Dial

Speed Dial Numbers: Storing, Viewing or Changing ................................................................. 46

Delete Speed Dial Numbers ...................................................................................................... 47

Switching Features

Consultation / Transfer Call ........................................................................................................ 48

Internal Consultation ................................................................................................................. 48

External Consultation ................................................................................................................ 49

Toggle ........................................................................................................................................ 50

3-Way Conference ..................................................................................................................... 51

Activate Internal Call Forwarding ............................................................................................... 52

Deactivate Internal Call Forwarding ........................................................................................... 52

Connection with the Door Interphone ....................................................................................... 53

Call Charges, Call Length

Display of Call Length: Activate / Deactivate ............................................................................. 54

Activate / Deactivate Display of Call Charge or Call Charge Unit ............................................... 55

Call Charge Display of Previous Call: Activate / Deactivate ....................................................... 56

Call Charge Factor: Viewing or Setting ...................................................................................... 56

Call Charge Totals per Internal Station: View / Delete ............................................................... 57

Call Charge Totals per Telephone Line: View / Delete ............................................................... 58

1054K10.IVZ

Table of Contents

3

Gigaset 1054, GBR.: A30852-X954-B101-1-7619

28.10.96

Lock

Lock for Outgoing Calls (System Lock): Activate / Deactivate ................................................... 59

Emergency Numbers: Store / View ........................................................................................... 60

Delete Emergency Numbers ..................................................................................................... 60

Barred Numbers: Store .............................................................................................................. 61

Activate / Deactivate Barred Numbers ...................................................................................... 62

Delete Barred Numbers ............................................................................................................. 62

Set Class of Service for the Internal Stations ............................................................................ 63

Locking the Mobile Unit / Activate Hotline ................................................................................ 64

Hotline Number: View / Delete / Store ...................................................................................... 65

Dial Hotline Number .................................................................................................................. 66

Unlock Mobile Unit .................................................................................................................... 66

System Settings

Set the Connection Configuration for Internal Stations ............................................................. 67

Ring Allocation for External Calls ............................................................................................... 68

Ring Allocation: Enter or Change Collective Call Group ............................................................. 69

Ring Allocation: Enter or Change Group Call ............................................................................. 70

Ring Allocation: Enter or Change Number of Ring Cycles for Group Call ...................................71

Ring Allocation for the Door Interphone .................................................................................... 72

Cancel registration Mobile Unit ................................................................................................. 72

Resetting the Base Station to the Status at Initialization ........................................................... 73

Mobile Unit Settings

Advisory and Alarm Tones: Activate / Deactivate .......................................................................74

Resetting the Mobile Unit to Initialization Status ...................................................................... 76

Operation with Comfort Mobile Unit

Using the Menu

Using the Dialog Keys ................................................................................................................77

Using the Menu ..........................................................................................................................77

The Entire Menu .........................................................................................................................77

Menu Structure for System Settings ......................................................................................... 78

Status-Dependent Menus ......................................................................................................... 79

Standard Settings

Enter / Change System Code .................................................................................................... 80

Set Dialog Language ................................................................................................................. 81

Set Tone Ringing for Mobile Unit ............................................................................................... 81

Enter / Change Mobile Unit PIN ................................................................................................ 82

Activate / Deactivate Call Pickup ............................................................................................... 83

Activate / Deactivate Automatic Line Seizure ............................................................................ 84

Mobile Unit Settings .................................................................................................................. 85

Incoming Calls

Accept / Terminate Call .............................................................................................................. 86

Call Pickup ................................................................................................................................. 87

Answer Call Waiting During an Internal Call .............................................................................. 88

Answer a Call Waiting During an External Call .......................................................................... 88

4

1054K10.IVZ

Table of Contents

Gigaset 1054, GBR.: A30852-X954-B101-1-7619

28.10.96

Outgoing Calls

External Dialing with Dialpad ..................................................................................................... 89

External En-Bloc Dialing with Dialpad ........................................................................................ 91

Number Redial ........................................................................................................................... 92

Number Redial as En-Bloc Dialing ............................................................................................. 92

Internal Dialing to Another Mobile Unit or Auxiliary Device ....................................................... 93

Dialing from the Telephone Book .............................................................................................. 94

During the Call

Call on Hold ............................................................................................................................... 95

Temporary Switchover to Tone Dialing ..................................................................................... 96

Change Handset Volume ........................................................................................................... 97

Mute Function ........................................................................................................................... 97

Telephone Book

Entering Names and Characters ................................................................................................ 98

Dialing Convenience with the Telephone Book ......................................................................... 99

Switching Functions

Internal Consultation / Transfer of Call .................................................................................... 101

External Consultation / Transfer Call ....................................................................................... 102

Toggle ...................................................................................................................................... 103

3-Way Conference ................................................................................................................... 104

Activate/ Deactivate Internal Call Forwarding ...........................................................................105

Connection to the Door Interphone ..........................................................................................106

Charges, Call Length

Display of Charges / Display of Call Length ..............................................................................107

Activate and Deactivate Call Length and Call Charge Display / Set the Unit Cost ....................108

Lock

Lock to Prevent Outgoing Calls / Emergency Numbers ...........................................................110

Enter, View, Delete Restricted Numbers / Activate or Deactivate Lock ................................... 111

Delete All Barred Numbers .......................................................................................................112

Set the COS for Internal Stations ............................................................................................. 113

Lock Mobile Unit /Change Hotline Number / Mobile Unit PIN ................................................ 114

Cancel Registration of Mobile Unit Lock (Unlock) ................................................................... 114

System Settings

First Steps for System Settings ................................................................................................115

Set Connection Configuration for Internal Stations ..................................................................116

Resetting the Base Station to the Status at Initialization ..........................................................117

Ring Allocation for External Calls .............................................................................................. 118

Set / Change Ring Allocation and Ring Cycles ..........................................................................119

Ring Allocation for the Door Interphone ...................................................................................120

Cancel Registration for Mobile Unit ..........................................................................................121

Mobile Unit Settings

Activate / Deactivate Advisory and Alarm Tones ......................................................................122

Operation with Auxiliary Device

Outgoing Calls

General .....................................................................................................................................123

External Dialing with Digit Dialpad ...........................................................................................123

Internal Dialing to Another Mobile Unit or Auxiliary Device ......................................................123

Temporary Switchover to Tone Dialing .....................................................................................124

1054K10.IVZ

Table of Contents

5

Gigaset 1054, GBR.: A30852-X954-B101-1-7619

28.10.96

Incoming Calls

Call Pickup ................................................................................................................................125

Answer Call Waiting .................................................................................................................125

Switching Functions

Set Internal Call Forwarding .....................................................................................................126

Deactivate Internal Call Forwarding ..........................................................................................126

Placing a Call on Hold ...............................................................................................................126

Consultation / Transferring a Call ..............................................................................................127

Toggle .......................................................................................................................................128

3-Way Conference ....................................................................................................................128

Connection with the Door Interphone ......................................................................................129

Multicell System

General Information ..................................................................................................................130

Standard Mobile Unit

Registering the Standard Mobile Unit on Multiple Base Stations ............................................131

Base Station Selection, Automatic / Manual / Combined .........................................................132

Activate / Deactivate the Base Station Number .......................................................................133

Comfort Mobile Unit

Register Comfort Mobile Unit on Multiple Base Stations ........................................................134

Base Stations Selection: Automatic / Manual / Combined .......................................................136

Operation on Telephone Systems

Standard Mobile Unit

General Information ..................................................................................................................137

Enter Trunk Code (AKZ) ...........................................................................................................137

Enter Main Trunk Code (HAKZ) ................................................................................................138

Change Length of Timeout after AKZ / HAKZ ..........................................................................139

Deleting AKZ and HAKZ ...........................................................................................................140

Set / Change Time for Flash .....................................................................................................141

Comfort Mobile Unit

General Information ..................................................................................................................142

Enter the Trunk Code (AKZ) .....................................................................................................142

Using the Features

Activating Features of the Telephone System ..........................................................................143

Acoustic Signalling

Signal Tones .............................................................................................................................145

General Information

Taking Care of the System ....................................................................................................... 146

Technical Data ..........................................................................................................................146

Leaving the Radio Range .........................................................................................................146

Tips for Troubleshooting ...........................................................................................................147

Warranty ...................................................................................................................................148

Contact Partners ......................................................................................................................148

Connection Configuration .........................................................................................................149

Glossary ..................................................................................................................................150

Quick Reference Operating Instructions - Standard Mobile Unit ..................................... 155

Quick Reference Operating Instructions - Comfort Mobile Unit ......................................158

Quick Reference Operating Instructions - Auxiliary Device ..............................................161

6

1054K10.IVZ

Table of Contents

Gigaset 1054, GBR.: A30852-X954-B101-1-7619

28.10.96

3

Gigaset 1054,GBR: A30852-X954-B101-1-76191054K01.FM28.10.96

Introduction

With the purchase of Gigaset 1054, you have selected a cordless system which combines the
advantages of “unrestricted freedom of telephoning” with the convenience of a first rate tele­communications system.

This device is equipped with modern digital technology based on the latest European standards
for cordless telephones (DECT and GAP). The DECT technology offers, among other things, a
high level of security against unauthorized eavesdropping within the radio cell as well as good
digital voice quality. In addition, it enables the simple expansion of the Gigaset 1054 basic config­uration -- for example one base station, two mobile units -- to a telephone system which can be
used to place external and internal calls. Mobile units of the Gigaset 1000 series and upward can
be operated on Gigaset 1054.

Gigaset 1054 can be used for both private and professional purposes, for example in office build­ings and small companies. In addition to the usual telephone functions, it offers, among other
things:

● Direct dial to the mobile units or auxiliary devices

● 2 simultaneous external calls

● Operation of 8 mobile units and 2 non-cordless auxiliary devices on one base station

● No-charge internal calls among 6 mobile units

● Simultaneous use of a maximum of 6 cordless devices

● Coding of transmissions between mobile unit and base station

● Operation of a mobile unit on up to 4 base stations, thus expanding the radio range within

which you can place and receive calls.

You can install and connect your Gigaset 1054 yourself. To do so, please read the chapter “Put­ting Into Service.”

The device is pre-set in the factory so that, after putting the base station and mobile unit into ser­vice, you can begin using the telephone without making any additional settings.

Information about operation of the telephone can be found in the sections:

– Operation with Gigaset 1000 S standard mobile unit
– Operation with Gigaset 1000 C comfort mobile unit
– Operation with non-cordless auxiliary devices.

The other chapters of the operating instructions deal with the special functions and the expan­sion of Gigaset 1054.

We recommend that you read these additional chapters in order to acquaint yourself fully with
the capabilities of your Gigaset 1054.

At the end of the operating instructions, you will find a capsulated version of the instructions,
including the most important functions. The table of contents and index are provided to help you
find functions, system settings and other information expeditiously.

About this Device

About the Operating Instructions

U2

4

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K01.FM28.10.96

Overview Figures

Front Rear

A Registration Key: B Non-cordless auxiliary device

to register the with the telephone number 0
mobile units

- blinks during registration C Non-cordless auxiliary device
with the telephone number 9

-is lit when plug-in power D Connection jack for

supply is connected telephone line 1

Lamp is identical to the E Connection jack for
the registration key! telephone line 2

F Connection jack for plug-in power

supply C39280-Z4-C65

A

B

C

Front of Gigaset 1054

Rear of Gigaset 1054

B

C

E

D

F

U4

5

Gigaset 1054,GBR: A30852-X954-B101-1-76191054K01.FM28.10.96

U3

Overview Figures

Standard Mobile Unit 1000S

Comfort Mobile Unit 1000C

Legend

1 Handset
2 Screen
3 Repeat dial key
4 Memory key
5 Speed dial key
6 Dialpad
7 Internal key
8 Signal key
9 ON/OFF/LOCK key
10 Seize key
11 Microphone
12 Star key
13 Pound key

14 Tone ringing loudspeaker
15 Battery compartment / cover

Front View Rear

Carry clip

11

14

15

Legend

1 Handset
2 Screen (illuminated)
3 Dialog key
4 Dialog key
5 Menu key
6 Dialpad (alpha-

numeric)
7 Internal key
8 Signal key
9 ON/OFF/LOCK key
10 Seize key
11 Microphone
12 Star key
13 Pound key

14 Tone ringing loudspeaker
15 Battery compartment/ cover

Front View Rear

Carry clip

15

14

6

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K01.FM28.10.96

Important Tips

For your safety and protection, do not use the base station or mobile units in bathrooms or
showers (damp areas); the telephones are not waterproof.

Warning

● Use only approved rechargeable Nickel Cadmium batteries (NiCd)

(See “Important Information about Using the Battery Cells,” page 15).
Never use other rechargeable battery cells or normal (non-rechargeable) batteries.

These might short circuit or destroy the battery casing (dangerous). Follow the instruc­tions found on the labels in the battery compartments of mobile units and charging units.

The symbols on these labels state :

● Do not immerse batteries in water, and do not expose them to fire.

● Do not dispose of old defective batteries in your normal household trash.

● Batteries become warm while charging; this is normal and does not represent a danger.

● Do not use charging units from other manufacturers, since these could damage the

batteries.Supplemental charging units can be ordered from Siemens.

● Use only the AC adapter delivered with your device, bearing the number C 39280-Z4-C65.

● Connected non-cordless auxiliary devices (telephone, fax, door interphone...) which have

exposed metal parts might temporarily conduct abnormally high voltage, for instance during
an electrical storm, and should not be touched.

● The mobile unit must not be operated in environments where there is danger of explosion.

●

The Federal Agency for Telecommunication Certification (”Bundesamt für Zulassungen in der
Telekommunikation“) has issued the BZT certification for this telephone system. It has been
approved in line with the EU Guidelines 91/263/EWG, Telecommunication Devices.

This telephone system fulfills the requirements set forth in the EU Guidelines:

89/336/EWG “Electromagnetic Compatibility“
73/23/EWG “Electrical Resources for Use within Certain

Voltage Limitations“

The CE identification mark certifies the device’s conformity with these guidelines.

Safety Precautions

CE Mark of Approval and Certification for the Main Connection and Telephone Systems

– Use only the type listed in the operating instructions

–Use only rechargeable batteries and in the polarity shown.

(See chapter “Inserting and Loading the Batteries“,

page 14)

+

_

7

Gigaset 1054,GBR: A30852-X954-B101-1-76191054K01.FM28.10.96

Putting Into Service

Dialing Mode

The factory setting on your telephone system is for “tone dialing.” In some cases, it might be
necessary to change the setting to the old dialing mode of “pulse dialing.”

Instructions on how to determine and set the dialing mode are found on page 20 and on page 25.

Connection Cable

The connection cable included with the device is equipped with the TAE connection plug
(TAE = Telephone Adaptor).

If the proper telephone adaptor jack (TAE) is not available at the installation site, it can be ordered
from the German Telekom AG.

Use only original Siemens connection cables. Other cables may have a different configuration.

Power Supply Unit

The power supply unit included with the device is necessary for operation of your telephone sys­tem.

Telephone Systems

The telephone system is suitable for connection to telephone systems with signal key functions
(consultation) “Flash” and “Ground.”

.

Systems connected to a digital switching exchange of the German Telekom AG have access to a
number of new features such as call waiting, call forwarding, lock and others.

If you want to take advantage of these features, please consult the German Telekom AG. Your
Gigaset 1054 is equipped to accommodate these features.

Important Information

New Features for Telephone Service

8

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K02.FM28.11.96

Putting Into Service

In order to put the Gigaset 1054 telephone system into service, follow the simple step by step
procedure illustrated below :

In order to put your base station into service and to change your settings, you must first enter a
four-digit code, the system code. The procedure for doing this is described in the operating
instructions. At the time of delivery, "0000" is set as the system code. You must use this pre-set
"0000" system code to register the first mobile unit. A separate mobile unit PIN is available for
the disabling of an individual mobile unit.

Recommendation:

We recommend that the system code be changed after registration of the first mobile unit (see
page 30). The system code "blocks" your system from being accessed by any unauthorized indi­viduals. Registration of additional mobile units as well as system settings can only be carried out
after entering this system code.

Step by Step Instructions

System Code

1 Read the safety precautions! Page 6

2 Assemble charging unit and put into service Instructions for charging unit

3 Prepare mobile units for putting into service Pages 14 - 15

4 Assemble base station and put into service Pages 9 - 13

5 Put the mobile units into service Std. mobile unit P. 16 - 20

Comf. mobile unit P. 21 - 26

Base station and mobile unit are ready for operation, you can place/receive calls

6 Set the ring allocation Standard mobile unit P.69

Comfort mobile unit P.118

You can now use the phone in a target-specific manner.

9

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K02.FM28.11.96

1

3

2 5

4

.Putting Into Service Base Station Gigaset 1054

Base station Operating instructions
TAE connection cables (2) 2 screws and plugs
Plug-in power supply unit

● Gigaset 1000S mobile units

● Gigaset 1000C comfort mobile units

● Rechargeable batteries for mobile units

● Gigaset 1000L charging units

● Cordless telephone connectors Gigaset 1000TAE

Contents of Package

Special Accessories

1

2

4

5

Operating Instructions

s

Gigaset 1054

Schnurloses digitales DECT-Telefonsystem

8 Mobile units

can be connected

2 non-cordless devices

can be connected

3

4

10

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K02.FM28.11.96

Putting Into Service Base Station Gigaset 1054

If you are using non-cordless telephones along with this cordless telephone, we recommend
that you keep as great a distance as possible between the telephone and the base station in
order to prevent humming (technical source) noises on the telephone.
Place the base station at the most central site possible within the range in which you want to be
able to use the phone. For example:

The base station should, if possible, be installed at an easily accessible site. For example:

If you also want to be able to use the phone outside of the building, install the base station:

Installation Site / Selection of the Mounting Site

In selecting the installation site, the following criteria should be taken into consideration:

1. The telephone connection cable must be long enough to reach the jack of your TAE connec­tor.

2. A 220/230 V electrical outlet must be available at the installation site for supply of power to
the base station.

3. In order to prevent mutual interference, the installation site should not be in direct proximity
to other devices such as, for example, a HiFi, office equipment or microwave appliances.

The base station is designed for operation in protected rooms with a temperature range of
0 to +50 °C. It should not, for example, be installed in the bathroom, laundry room, damp base­ment rooms or near heat sources, such as, for example, radiators. It should also not be installed
at a site exposed to direct sunlight.

Tips for the Most Advantageous Installation of the Base Station

in the hallway of your apartment,
in a centrally-located room of your house, office or apartment,
not in the basement,
not in the attic.

in an open space in the room,
not in alcoves,
not behind metal doors, heavy furniture, metal cabinets,
not in places which are especially heavily shielded from radio waves by thick (steel)

concrete walls or metal walls.

as near to window level as possible,
in a room facing your grounds.

11

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K02.FM28.11.96

Putting Into Service Base Station Gigaset 1054

Range

Depending on the surroundings, the outdoor range can be up to about 300 m. Within buildings,
depending on spatial and structural conditions, a range of up to 50 m is possible.

If you should leave the range, you will lose the radio contact to the base station and the
symbol on the screen will blink. If you have activated the range alarm (delivery status = deactiva­ted), a supplemental warning tone will sound before you leave the radio range.

The device can be installed on a flat surface (for example, on a desk or shelf) or mounted on the
wall.

1. First plug the mini western plug of your telephone cord into the jack labeled "L1" or
"L2" (bottom of base station).
If only one external telephone line is to be connected to Gigaset 1054, the "L1" should be
used.

2. Plug the mini western plug of the cable into the plug-in power supply, using the jack labeled
„“ (bottom of base station).

3. Place the cable inside the molded channel.

If you want to mount the device on the wall, follow the steps below after carrying out those
above; if it is not to be wall mounted, proceed to step 8:

4. Drill two holes (Ø 5mm), 69 mm apart.

5. Insert two plugs.

6. Screw the screws into the wall, leaving 2 mm between the head of the screw and the wall.

7. Hang the base station on the wall by lining up the heads of the screws with the holes in the

base station and pushing down briefly on the base station until it is firmly mounted.

8. Insert the TAE plug of the telephone connection cable into the telephone jack.

9. Insert the plug-in power supply into the 220/2230V electrical outlet.

Note:

● In the case of loss of power, it is still possible to place a call using a supplemental non-cord-

less telephone connected to the “0” jack.

● Use the plug-in power supply delivered with your unit, C 39280-Z4-C65.

● Be careful not to mix up the connections for the telephone cable and the plug-in power sup-

ply on the base station. If these are plugged incorrectly, the base station will not function;
damage to the base station could also result.

Mounting / Connecting the Base Station

12

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K02.FM28.11.96

Putting Into Service Base Station Gigaset 1054

120mm

180 mm

170 mm

5mm

5mm

Specifications for Wall Mounting

Connections for Gigaset 1054

Telephone
connection cable

Plug-in power supply

13

Gigaset 1054, GBR: A30852-X954-B101-1-76191054K02.FM28.11.96

Putting Into Service Base Station Gigaset 1054

The system is delivered with the following factory settings:
Direct trunk access Fully trunk authorized

Automatic line seizure ON
Call charge recording OFF
Unit charge rate 0.00
Display duration of call ON
Configuration auxiliary device Telephone
Ring allocation Collective call
System code 0000
Dialing mode DTMF
Signal key Flash/250 msec

Connection Options at the Base Station

Status of the Base Station Upon Delivery

#

GHI MNO

PQRS WXYZ

1 3

DEF2ABC

9

7

4 6

*

F

0221731550

SummRüc

k

Een

JKL

5

TUV

8

.-

0

INT

#

GHI MNO

PQRS W XYZ

1 3

DEF2ABC

9

7

4 6

*

F

0221731550

SummRückEen

JKL

5

TUV

8

.-

0

INT

faxmachine

Rear view of
Gigaset 1054

Mobile units

Plug-in
power supply

230V socket

TAE
connec­tion cables

Telephone

TAE connection cables

Non-cordless device:
if present

14

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Mobile Unit

The Standard mobile unit can be used in temperature ranges between 10° C and 55° C, the Com­fort mobile unit in ranges between 0° C and 45° C . Do not expose to water.

Individuals with hearing aids should be aware that radio signals are projected into the hearing
aid and, if strong enough, can result in a very disturbing humming tone.

The mobile unit receives its power via 2 rechargeable batteries. In order for the mobile unit to
function, these batteries must be installed in the battery compartment and the compartment
cover must be closed.

1. Installing the batteries in the mobile unit

● Hold the mobile unit with the dialpad facing down. The compartment for the two recharge-

able batteries is in the lower part of the mobile unit.

● Slide the rechargeable batteries (included with your unit) into the compartment, as shown in

the figure below. Be sure that the polarity orientation of the batteries is correct. The plus and
minus signs are labeled in the battery compartment (see figure below).

● From the top, slide the battery compartment cover into the slots (see figure) of the mobile

unit and snap into place.

Note:

If the rechargeable batteries are not correctly installed, the mobile unit will not function.

2. Charging the rechargeable batteries

The batteries are not charged at the time of delivery. To charge the batteries, place the mobile
unit in the charging unit (not included). The dialpad can be facing either up or down. However, the
charging contacts on the bottom of the mobile unit must be in contact with those on the bottom
of the charging unit.
If the mobile unit is properly inserted for charging, the LED (light-emitting diode (

B ) will remain

lit, signalling that the battery is charging.
The charging time can vary greatly, depending on the age and the manufacturer/type of recharge­able battery. The charging logic of the mobile unit always guarantees, however, an optimum
charge of the rechargeable batteries.

Tips for Individuals with Hearing Aids

Installing and Charging the Rechargeable Batteries

15

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Mobile Unit

The carrying clip can be mounted if desired. Grasp the mobile unit, holding the dialpad in the
palm of your hand. You will see small holes parallel to the screen. Insert the clip first into the hole
on one side and then snap it into the hole on the other side.

The mobile unit comes with two rechargeable AA Nickel Cadmium batteries (Mignon
cells)

● Use only the batteries which come with the product.

● If replacement is necessary, use only approved batteries of the following types: Panasonic

P-60 AA, Philips R6 NC-P, Saft RC6, UCAR RC6, DAIMON ACCU 1000, Varta 751 RS,
Sanyo N-3UN, Sanyo N-3UC.

● The use of other battery types or of non-rechargeable batteries can cause problems with

operation, and may even damage the device.

● The manufacturer does not accept any responsibility in such cases.

Do not use normal batteries! Use only approved rechargeable batteries!

When putting into service and using the rechargeable batteries, please observe the fol­lowing basic principles:

● Before use, be sure that the batteries are adequately charged.

We recommend that they be charged without interruption for about 16 hours -- for example
overnight -- and that, during the first week of use, the mobile unit always be replaced in the
charging unit after use.

● New rechargeable batteries generally do not attain their full operating capacity (i.e. length of

time that the charge is held for calls and standby status) until they have been in normal use
for several days. Even ifthe charging LED signals that the batteries in the mobile unit are
charged -- LED off -- , it is nevertheless possible that, during the first few days, the normal
call and standby time has not yet been fully reached.

● After complete initial charging, the batteries attain their normal operating status. We recom-

mend that, after this initial charging, the mobile unit not be replaced in the charging unit each
time it is used. The rechargeable batteries function best if they are completely discharged
periodically.

Warning: Limited operating time when batteries are partially discharged

● Be sure that the battery contacts do not come into contact with metallic or greasy parts.

● Replacement battery packs (reserve) can be charged in the charging unit; these should be

exchanged periodically with those in the mobile unit.

3. Rechargeable Battery- Operating and Charging Times

Mobile Unit Gigaset 1000S Gigaset 1000C

Continuous call up to 7 hours up to 5 hours
Standby status up to 50 hours up to 40 hours
Charging times in mobile unit, in the charging unit about 5 hours
Charging times in reserve compartment, in the charging unit about 24 hours

Mounting the Carrying Clip on the Mobile Unit

Important Tips for Using the Rechargeable Batteries

16

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Standard Mobile Unit

Symbol Explanation

u Display after pushing the signal key, e key.

U

Display of call forwarding, if programmed.

P Manual dial pause
z Memory empty.
A AKZ discriminating digit (only significant if behind telephone system)

H

HAKZ (only significant if behind telephone system)

n

Display of the star key, *key.

- Display of the pound key, #key.

Symbols Explanation

A

Shows that the mobile unit is in save status and is not ready to dial.

Can be activated using the wkey.

B

Battery symbol blinks about 5 - 10 minutes before the batteries are empty.
If the mobile unit is in the charging unit and is charging, then this symbol appears.

C

ON symbol. Can be activated using the u key.

D

Connect symbol shows that a radio channel to the base station exists.
Can be activated using the gkey.

E

Shows that the signalling method has been temporarily switched from
pulse to tone dialing.

F Shows that an external connection exists via the base station.

G Shows that an internal connection exists via the base station.
H

Shows that the mobile unit is locked.

Displays

The top lines display all numbers and symbols,

the bottom lines display the symbols for different
operating statuses.

A BCD E F G H

uUPzAHn-88888888

17

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Standard Mobile Unit

The mobile unit can be set to three different statuses.

• OFF
No calls can be placed and no incoming
calls are signalled.

• ON
Calls can be placed and received.
In order to pick up a call, simply remove the mobile
unit from the charging unit.

or

If the mobile unit was not in the charging unit, then
press the g key.

• LOCK
This protects the dialpad of the mobile unit
against unintentional use, for example when
it is being carried in your pocket. Incoming calls can
be accepted just as in ON status. For the call, the
mobile unit switches automatically to the ON status.
Outgoing calls are not possible.

Note:

● If the mobile unit is not within the radio range of the base station, the C symbol blinks on

the screen. It is not possible to place or receive calls.

● Procedures can be interrupted by pressing the gkey once or, if necessary, twice.

ON OFF, LOCK Status

CCC

zzzz

18

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Standard Mobile Unit

Switching from ON status:

u ● to OFF status:

Push the key until the display on the
screen goes off.

You will hear the key acknowledg­ment tone.

● to LOCK status:

Push key briefly, until the
display is updated.

You will hear the key acknowledg­ment tone.

Switching from OFF status:

u ● to ON status:

Push the key until the
display appears on the screen.

You will hear the key acknowledg­ment tone.

or

Simply place the mobile unit in the
charging unit.

You will hear the key acknowledg­ment tone.

Switching from LOCK status:

u ● to ON status:

Push key briefly, until the display
is updated.

You will hear the key acknowledg­ment tone.

u ● to OFF status:

Push the key until the display on
the screen goes off.

You will hear the key acknowledg­ment tone.

Note:

The mobile unit must be in ON status in order to dial or to to use the memory.

Switching the Status

C

C

zzzz

CCC

zzzz

C

19

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Standard Mobile Unit

Every additional mobile unit acquired must first be registered at the base station.
For this, follow these steps:

1. The mobile unit must be switched off

If necessary, turn it off by pushing the
u key until the display on the screen goes off.

2. Push the registration key on the base station.
Please use an object with a
sharp point (e.g. pencil, ballpoint pen).
The registration key will blink.

3. Next (within 1 minute) on the mobile unit:

The mobile unit must be switched off.

o

Press the 1 and
hold it down.

(This is done to stipulate the base
station number)

u In addition, push the ON key until the

display appears on the screen.

o

Enter the system code.

At the time of delivery, the
system code is set as 0000.

#

Complete entry of the system code.

Please wait until the connection to the
base station is established.

All of the non-assigned internal station
numbers appear on the screen;
shown here, 1 to 8.

! ... (

Enter the desired internal station num­ber for the mobile unit, i.e. push one of
the number keys between 1 and 8;
here, for example, 2 is pushed.

The mobile unit is registered.
If the display of the base number is acti-

vated, you will now see the base num­ber.

Note:

● Up to 8 mobile units can be registered on one base station.

● If 8 mobile units are already registered, three dashes appear when the system code is

entered during the registration procedure; a negative acknowledgment tone sounds.

● To deactivate mobile unit, see page 72.

Registering a Standard Mobile Unit at the Base Station

Registration key

C

1-

C

1-- -

C

1

A

C

D

12345678

C

20

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K03.FM

Putting Into Service Standard Mobile Unit

The German Telekom AG offers two different dialing modes for telephone connections:

● Dial pulsing system (Dial Pulsing System = DPS)

● Dual-tone (multifrequency system = DTMF)

A the time of initialization, your new telephone is set for tone dialing.
Tone dialing (DTMF) is, however, only possible if your telephone lines are connected to a new

digital switching exchange. The German Telekom AG has, however, not yet completely finished
converting all telephone lines in Germany to digital switching exchanges.

Determining the Dialing Mode of Your Telephone:

Push the connect key and then dial any digit (for example, 2).
If you then still hear the same dial tone, you will have to switch the dialing mode.

w# Push the memory key followed by the # key.

This opens the memory.

1 Push the 1 key.

This activates the procedure.

o Enter the system code.

Every digit entered replaces one dash.

1“ Select external telephone line 1 or 2.

z Push the repeat dial key.

DPS

0§§ Push the keys 0, 3, 3..

Tone Dialing, Signal Key Flash for Telephone Systems (Setting the Flash, see page 141)

0§/ Push the keys 0, 3, 7.

Tone Dialing, Signal Key Flash (length/250 ms) for Telephone Service on
Main Connection (status upon delivery)

0§( Push the keys 0, 3 , 8.

w Push the memory key.

The dialing mode is now programmed.

Viewing and Setting the Dialing Mode

A

C

D

-

A

C

D

1 ____

A

C

D

1 _

A

C

D

012

A

C

D

A

C

D

03 3

A

C

D

03 7

A

C

D

03 8

C

21

Gigaset 1054, GBR: A30852-X954-B101-1-76198.11.96

1054K04.FM

Putting Into Service Comfort Mobile Unit

There are four lines on the graphics screen of your Comfort
mobile unit.
During dialing, the number which is being dialed is enlarged and
displayed across two lines.
The bottom lines contain the display fields for the dialog keys.
All displays are shown in clear text.
Some displays are illustrated with graphics; these are explained
in the tables below.

Graphic Explanation

You are being called

Set the ringer volume (6 levels)

Tone ringer off

Set tone ringer pitch (10 levels)

Set tone ringer melody (10 levels)

Set handset volume (3 levels)

Set contrast (6 levels)

Switch signal tone on or off

Locked or unlocked status
If the charge of the rechargeable batteries goes below a

certain level, this symbol appears periodically for 2
seconds.

Display

External 1

0123456

F

CONSLT.

Dialog keys

MUTE

22

Gigaset 1054, GBR: A30852-X954-B101-1-76198.11.96

1054K04.FM

Putting Into Service Comfort Mobile Unit

The mobile unit can be set to three different statuses.

1. OFF

No calls can be placed and no incoming calls are signalled.

2. ON

Calls can be placed and received.
In order to answer a call, simply remove the
mobile unit from the charging unit.

or

If the mobile unit was not in the charging unit,

then press the g key.

3. LOCK

This protects the dialpad of the mobile unit from unintentional
use, for example, when it is being carried in your pocket.
Incoming calls can be accepted just as in ON status. The mobile
unit switches automatically to ON status for the call.
Outgoing calls are not possible.

Note:

● If the mobile unit is not within the radio range of the base

station,, then the text “Srch.station X” blinks on the screen,
whereby X is the stipulated base station number.

● A procedure can be interrupted by pushing the gkey

once, or if necessary, twice.

ON, OFF, LOCK Status

Station 1

TEL.BOOK

REDIAL

Keyboard
protected

Srch.station 1

TEL.BOOK

REDIAL

23

Gigaset 1054, GBR: A30852-X954-B101-1-76198.11.96

1054K04.FM

Putting Into Service Comfort Mobile Unit

Switching from ON Status:

u ● to OFF status:

Push the key until the display on the
screen goes off..

You will hear the key acknowledgment tone.

u ● to LOCK status:

Push the key briefly, until the display
is updated.

You will hear the key acknowledgment tone.

Switching from OFF Status:

u ● to ON status:

Push the key until the
display appears.

You will hear the key acknowledgment tone.

or

● Simply place the mobile unit in the

charging unit.

You will hear the key acknowledgment tone.

Switching from LOCK Status:

u ● to ON status:

Push the key briefly, until the
display is updated.

You will hear the key acknowledgment tone.

u ● to OFF status:

Push the key until the
display goes off.

You will hear the key acknowledgment tone.

Note:

● The mobile unit must be in ON status in order to dial or to use the memory.

Switching the Status

Station 1

TEL.BOOK

REDIAL

Keyboard
protected

Srch.station 1

TEL.BOOK

REDIAL

Station 1

TEL.BOOK

REDIAL

Keyboard
protected

Station 1

TEL.BOOK

REDIAL

24

Gigaset 1054, GBR: A30852-X954-B101-1-76198.11.96

1054K04.FM

Putting Into Service Comfort Mobile Unit

Every additional mobile unit acquired must first be registered at the base station.
For this, follow these steps:

1. Push the registration key on the base station.

Please use an object with a sharp point (e.g. pencil, pen).
The registration key begins to blink.

2. Then, on the mobile unit (within 1 minute):

If you switch on a Comfort mobile unit
which is not registered at any base station,
the following display appears.

Push F key,

Push F key,
Main menu appears

Push this key repeatedly until “Settings”
appears on the 1st line of the main menu.

Push this key to select “Settings”
The next menu level appears

Push this key repeatedly until “Register”
appears on the 1st line of the main menu.

Push this to select “Register”

Scroll to select the base station.

The selection of the base station number,
stipulates the station on which your mobile
unit is to be operated; here, station 1.

Registering the Comfort Mobile Unit at a Base Station

Registration key

u

Register !

ß

Srch.station

REDIALTEL.BOOK

ß

Telephone book

Redial
Telephone lock

OKNEXT

NEXT

Settings

Station selection

Service

OKNEXT

OK

Handset volume

Tone ringing
Display contrast

OKNEXT

NEXT

Register

Language
Autom.backlight

OKNEXT

OK

Station 1

Station 2

OK

Station 3

NEXT

NEXT

OK

Registration

Srch.station 1

Continued

25

Gigaset 1054, GBR: A30852-X954-B101-1-76198.11.96

1054K04.FM

Putting Into Service Comfort Mobile Unit

Enter the 4-digit system code. (Set at
“0000” upon delivery).
If necessary, correct with .

Push if you want to view but not register it.

or

Confirm that you want to register the Com­fort mobile unit at the base station with that
number.

Select one of the internal numbers which is
still available (for example, “4”).

The mobile unit can then be reached at this
base station, using this internal number.

Confirm the internal number.
If necessary, correct with .

Close the registration procedure.

The Comfort mobile unit displays the inter­nal number with which it is registered.

Note:

● You can register your Comfort mobile unit on up to four base stations.

● Up to 8 mobile units can be registered on one base station.

If 8 mobile units are already registered, the message “No free internal No.” appears on the
screen during the registration procedure after the system code is entered.

● To deactivate a mobile unit, see page 121.

Push internal key.
Your station number is displayed;

Here, the 1.

Push this key to return to the idle status.

Viewing Your Own Internal Number

o

Enter

system code:

* * - -

OK

NO

Register

on

Station 1

OKNO

OK

1... 8

Please enter

INT. No.:

1 2 3 4 5 6 7 8

OK

Own

4

OK

Internal no.:

OK

Registered

with

Internal no. 4

ü

Own:

Coll.call

Internal No.: 1

g

Station1

TEL.BOOK

REDIAL

26

Gigaset 1054, GBR: A30852-X954-B101-1-76198.11.96

1054K04.FM

Putting Into Service Comfort Mobile Unit

The German Telekom AG offers two different dialing modes for telephones:

● Dial pulsing system (Dial Pulsing System = DPS)

● Dual-tone (multifrequency system = DTMF)

At initialization, your telephone is set for tone dialing.
Tone dialing (DTMF) is, however, only possible if your telephone lines are connected to a new

digital switching exchange. The German Telekom AG has, however, not yet completely finished
converting all telephone lines in Germany to digital switching exchanges.

Determining the Dialing Mode of Your Telephone Connection:

Press the connect key and dial any digit (for example, 2).
If you still hear the same dial tone after dialing the digit, you will have to switch the dialing mode.

The dialing mode must be individually set for both external telephone lines:

1. In the idle state, press the ßkey and select “Service” from the main menu.

2. In the service menu, select “System Settings” and enter the system code.

(See also page 115).

After the correct system code is entered,
the following display appears:

Scroll, using NEXT ...
until “Line data” appears in the 1st line;

confirm with OK.
Scroll, using NEXT, to select the external

telephone line for which the call allocation is
to be set,
e.g. External 1; confirm with OK.

Confirm “Dial data” with OK..

Confirm “Dialing mode” with OK.
The menu for setting the dialing mode is

displayed (complete menu at left).

Note:

● In order to operate your Gigaset 1054 on a main station connection, you only need the

“DTMF/Flash 0.25” or “DPS/ground” settings.
The additional dialing mode settings are for operation of the
Gigaset 1054 as part of a telephone network (see page 137)ff.

Viewing and Setting the Dialing Mode

OK

Duration/units

NEXT

Call barring

Sys cd/Mn sys cd

Line data

Act.: DTMF/Fl0,25
New: DPS/ground
New: DTMF/ground

External 1/2

Dial data

Dialing mode

New: DTMF/Flash

- - - - - - - -

External 1

External 2

OKNEXT

OK

Dial data

NEXT

Call data

Pause duration

OK

Time for ground

NEXT

Time for flash

Dialing mode

OK

New: DPS/ground

NEXT

New: DTMF/ground

Act.: DTMF/Fl0,25

27

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K05.FM

Putting Into Service Non-Cordless Devices

The Gigaset 1054 base station is equipped with two telephone jacks (B and C), for connecting
non-cordless terminals. Internal station numbers are automatically allocated to the jacks:

● Jack B (upper) has the internal station number 0

● Jack C (lower) has the internal station number 9

The connections of the auxiliary devices must have TAE plugs. The Gigaset 1054 jacks have the
code F/N.

Only approved non-cordless devices can be connected.

Telephones can be connected immediately, without changing any settings. A telephone or non­cordless device does not have to be registered at the base station.

The dialing mode (pulse or tone dialing) is recognized automatically and does not need to be set.
It is not possible to set up connections with two non-cordless devices simultaneously.

A signal key on the telephone has no function once the telephone is connected to Gigaset 1054
(exception: telephones with tone dialing).

The telephone does not display any call charges. Call charges are, however, recorded by the
system. The charge sums per station and per multiple subscriber number can be queried or dele­ted from a registered mobile unit.

The settings necessary for the auxiliary device connection can be programmed using a registered
mobile unit.

You can stipulate whether a fax device, modem, VTX, a door interphone or an answering
machine is to be connected (see page 67 or page 116 ).

In addition, other station-specific settings, e.g. trunk authorization, call allocation, etc., can be
programmed -- using a mobile unit -- for every connected auxiliary device.

When a fax device is used with Gigaset 1054, the fax must be set for operation behind a
telecommunication system (see the operating instructions for your fax machine).

You can use the following Baud transmission rates on the station connections:

● Jack B (upper), internal station number 0: up to 28,800 Baud

Jack C (lower), internal station number 9: up to 9,600 Baud.

Connection Jacks

Can be connected Internal station no. Register on system as

Telephones (Jack B or C) 0 or 9 Telephone
Answering machine (Jack B or C) 0 or 9 Telephone
Fax devices (Jack B) 0 Fax or “Neutral“
Modems (Jack B) 0 Modem
T-Online (VTX) devices (Jack B) 0 Modem
External bell (Jack B or C) 0 or 9 Telephone
Door interphone (Jack C) 9 Door interphone

Connecting Telephones

Connecting Non-Cordless Devices (other than telephones)

28

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K05.FM

Putting Into Service Non-Cordless Devices

The following example shows how Gigaset 1054 can be connected to different types of door sta­tions via door interfaces, using the Siemens door interphone adapter.
Door interphone adapters are available in retail stores.

Connection Points for the TFE Adapter Box

a1/b1 Connection points for the voice wires leading to Gigaset 1054
TO1/TO2 Connection points for the door opener
KL1/KL2 Connection points for the doorbell button
a2/b2 Connection points for the voice wires leading to the door interphone
TS1/TS2 Power-on contacts for the interphone amplifier
UB1/UB2 Connection points for the doorbell transformer

Note:

● Ring allocation of the door interphone, see page 72 or page 120.

● Connection with the door interphone, see page 53 or page 106.

Examples of Connections for Door Interphones via TFE (entrance telephone)

Connection cable

Grothe
TL 290

RITTO

5760.00

Siedle

TLM 511

Door opener

Doorbell

transformer

b

a

UB2
UB1
TS1
TS2

9
+
TS

12
11

KL1

KL2

TFE adapter box

S30817-K930-A200

AmplifierDoorstations

or or

TS

KL1

b1
a1

KL2

TO2

TO1

b2

a2

a

b

Siedle

TLE 051

or

12

+

14

11

12
11

9
+

2

+

6
+

L
U
O

B

9
+

c

b

Siedle

PVG 402

Siedle power supply
NG 402

29

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K05.FM

Putting Into Service Non-Cordless Devices

The following examples show how Gigaset 1054 can be connected to different door station
types with the help of the Siemens door interphone adapter (TFE/V).

Tip:
Any humming

which might occur
can be eliminated
using this
connection.

Please note for door interphone adapter (TFE/V):

– The potentiometer should be set on the maximum volume (turn all the way to right).
– The X1 bridge must not be changed.
– Routing of X2 bridge: SIEDLE TLM 511 RITTO 5760 Grothe TS 6216

In addition, for the individual door stations, a variety of changes must be made:

Door Station Changes in the Door Station
SIEDLE TLM 511 - Open bridges 1, 3, 4.

- Replug loudspeaker wire from “bl” pin to “12“.
RITTO 5760 - Potentiometer on maximum volume
Grothe - Replug yellow wire from “B“ to “0“

Connection Examples for Door Interphones via TFE

TFE/V S30817-K936-A313

Bridge X1

Bridge X2

Potentiometer

L

O

B
U

12

13

14
11

LS1

LS2

MIC+
MIC-

Connection cable

Grothe

TS 6216

RITTO

5760

Siedle

TLM 511

KLI

B
A

KLI

AC

AC

TOE

TOE

220 V

Doorbell

key switch

Doorbell

transformer

8 - 12 V

Siedle

TLM 051

12

+

14

11

2

+

6

+

Gigaset 1054

Door opener function

not av ailable

AC

AC

1000uF

20V

40V/1A

30

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Standard Settings

For your own protection, you can enter a new system code for the system. This protects your
system settings and prevents registration of additional mobile units without the code. All entries
are carried out from a mobile unit. The system code at the time of initialization is 0 0 0 0.

w#(

*

Press these keys in sequence.

o

Enter the previously-set system code.

Every digit entered replaces one dash;
thereafter, 8 dashes appear.

o

Enter the new system code
(be sure to note this).

Every digit entered replaces one of the
first 4 dashes.

o

Enter the new system code again.

Every digit entered replaces one of the
last 4 dashes.

w

Push the enter key to complete
the procedure.

Note:

● If you have entered an erroneous system code, a negative acknowledgment tone is sig-

nalled and the display will blink.

● A procedure can be terminated by pushing the connect key.

● If you forget your system code, it will be necessary to disassemble your device. Forgetting

your system code is like losing a key. If this happens, please contact your system vendor.

Saving / Changing the System Code

A

C

D

8

--- - - -

n

A

C

D

8

-- -

n

A

C

D

8

- - -- - - - -

n

A

C

D

8

- - - -

n

C

31

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Standard Settings

In addition, you can enter a new individual PIN for each mobile unit. This prevents unauthorized
access, for example, to the personal data which you have stored. In addition, the mobile
unit PIN is necessary for: Locking the mobile unit and enabling hotline, programming the hotline,
unlocking the mobile unit and changing the mobile unit PIN. At initialization, the PIN is

0 0 0 0

.

w

Push the enter key.

The memory is opened.

(

Push the 8 key.

The procedure is activated.

)

Push the 9 key.

Enter the previously-set mobile unit
PIN .

o

Every digit entered replaces one dash;
thereafter, 8 dashes appear.

Enter new mobile unit PIN
(be sure to note this number).

o

Every digit entered replaces one of the
first 4 dashes.

Enter the new mobile unit PIN again.

o

Every digit entered replaces one of the
last 4 dashes.

w

Press the enter key again.

The procedure is complete.
The new mobile unit PIN is stored.

Note:

● If you have entered an erroneous mobile unit PIN, a negative acknowledgment tone will be

signalled and the display will blink.

● A procedure can be terminated by pushing the enter key.

● If you forget the PIN, it will be necessary to disassemble your system.

Forgetting a PIN is like losing a key.
If this should occur, please contact your telephone vendor.

Enter / Change Mobile Unit PIN

ACA

C

8

A

C

8 ____ 9

A

C

8 __ 9

A

C

8 ____ ____ 9

A

C

8 ____ 9

C

32

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Standard Settings

Volume

The tone ring volume of the mobile unit can be set at 6 levels.
Level 1 = quiet, Level 6 = loud (status at initialization).

w

Push the enter key.

% Push the 5 key.

The tone ring which is set for the mobile
unit rings and the volume level is
shown; here, 2.

o Push any of the number keys (1 to 6).

New setting; here, 6.

w

Push the enter key again.

Pitch

The pitch of the mobile unit can be set at 1 of 6 levels.
Level 1 = slow (status at initialization), Level 6 = rapid.

w

Push enter key.

&

Push the 6 key.

The pitch set for the mobile unit sounds
and the pitch level is shown; here, 2.

o Push any of the number keys (1 to 6).

New setting; here, 5.

w

Push the enter key again.

Setting Tone Ring of the Mobile Unit

ACA

C

5 2

A

C

5 6

CACAC

6 2

A

C

6 5

C

33

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Standard Settings

If the automatic line seizure is activated (status at initialization), an external telephone line is
immediately seized when the connect key is pressed, and a dial tone is heard. If this feature is
deactivated, you must first dial a zero in order to get an outside line.

w#!o

Press the keys shown in the sequence
shown and then enter system code.

Every digit entered replaces one dash
on the screen.

0 Push 0 for both telephone lines

z*§ Push these keys in sequence.

The display shows a list of the
registered subscribers.

o

The current settings are shown.

Select internal station, i.e. push one
number key between 1 and 8; here, 2..

=

or

1

To activate, push the 1 key (status at initialization).
To deactivate, push the 0 key.

w

Push the enter key to complete the
procedure.

If automatic call pickup is activated, you can receive the call immediately by simply picking the
mobile unit up from the charging unit. If it is not activated, you must first push the connect key.

w§( Push these keys in sequence.

The current setting is shown.

=

or

1

To activate, push the 1 key (status at initialization)
To deactivate, push the 0 key.

w

Push the enter key to complete the
procedure.

Activate / Deactivate Automatic Line Seizure

Activate / Deactivate Automatic Call Pickup

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

n

3 123

A

C

D

n

3 2 1

C

A

C

38 1

C

34

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Standard Settings

Explanations of how to utilize the call pickup feature are found on page 36.

w#!o

Push the keys shown here in the
sequence shown, and then enter the
system code.

Every digit entered replaces one dash
on the screen.

.

0 Push 0 for both telephone lines.

z*/ Push these keys in sequence.

=

or

1

To activate, push the 1 key (status at initializa­tion)
To deactivate, push the 0 key

w

Push the enter key to complete
the procedure.

Activate / Deactivate Call Pickup

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

n

7 0

C

35

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Incoming Calls

An incoming call (external, internal) is signalled via tone ringing as well as on the screen of the
mobile unit.

Screen Display Before Call Pickup:

Incoming external call:

Display blinks.

(here, telephone line 1)
Incoming internal call (here, from

mobile unit 2):

Display blinks.

To Pick Up a Call:

either “pick up”the mobile unit

from the charging unit,

or push the connect key g, if the

mobile unit is not in the charging unit.

Screen Display During the Call:

External (here, telephone line 1)

Internal (here, from mobile unit 2)

To Terminate a Call:

either place the mobile unit back in the charg-

ing unit,

or Push the connect key g , if the

mobile unit is not placed back in the
charging unit.

Display After End of Call:

Accept/Terminate Calls

C F

1

C G

2

CDF1CDG2C

36

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Incoming Calls

You can pick up an external call within a call group (see page 69) even if the call is not signalled
on your mobile unit (for example, in the case of call forwarding; see page 52).
For this, call pickup must be activated (see page 34).

g

Push connect key.

we

Push these keys in sequence, to pick up
the external call

or

If “Automatic line seizure” (see page 33) is activated:

= Push this key to seize a free telephone

line
(Display line code).

Call Pickup

C F

1

CDF1CDF

37

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Incoming Calls

The call waiting tone signals, during a call, that an external call is waiting. Picking up the external
call during an internal call terminates the internal call.

b

You are engaged in an internal call and
hear the call waiting tone.

we

Push these keys in sequence in order to
accept the external call immediately

or

g

Push the connect key to terminate the
connected internal call.
When the tone ring sounds, you can
pick up the external call.

The call waiting tone signals, during a call, that an external call is waiting.

b

You are currently engaged in an external
call and hear the call waiting tone.

we

Push these keys in sequence to pick up
the external call immediately.
(Already-connected external call is
placed on hold).

You can now toggle between the calls

ü#

Push these keys in sequence,
(terminate with e)

or set up a 3-way conference call

we

Push these keys in sequence,
(terminate with e)

or return to the original call

e

Push this key,

Answer Call Waiting During an Internal Call

Answer Call Waiting During an External Call

CD F G

3

A CD F G

CDF

- - -

CD F

123456

A CD F

CD F

123456

CDFCD

F

38

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Outgoing Calls

After putting Gigaset 1054 and the standard mobile unit into service, you can generally place
calls with any mobile unit which is switched to ON.

g

Seize external line
Push connect key

Automatic line seizure
is programmed (status at initializa­tion)

Line code (LKZ) of the available tele­phone line is shown.

Automatic line seizure is not pro­grammed

You will hear the internal dial tone

! Seize line 1

“ or line 2 specifically

= Seize available external telephone line

o

Enter the number to be dialed.

This is then shown on the screen;
here, for example, 123456.

To Terminate the Call:

g

Push the connect key or place the

mobile unit back in the charging unit.

Note:

If the trunk line is already being used by another internal station, “---” will blink on the screen of
your mobile unit and you will hear the internal busy signal.

External Dialing, Using Dialpad

C

D

CDF1CDFCD

F1CDF2CDF1CDF

1123456

C

39

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Outgoing Calls

En-bloc dialing makes it possible to view the external number which has been entered -- before it
is dialed.

Automatic Line Seizure Programmed

o

Enter the number to be called. Here, for
example, 1 2 3 4 5 6.

g

Press the connect key within
30 seconds.

The seize symbol will blink on the
screen. You will then hear the dial tone,
and the number is dialed.

The line code appears as the first digit.

Automatic Line Seizure Not Programmed

o

Enter the number to be called,
preceded by the line code
(here, for example, 1)
0, 1 or 2, followed by the telephone
number

g

Press the connect key

The seize symbol will blink on the
screen. You will then hear the dial tone,

and dialing begins

To Terminate the Call:

g

Push the seize key or return the mobile

unit to the charging unit.

Note:

● If you want to change a block of numbers which has already been dialed or if you want to re-

enter it, push g twice.

● En-bloc dialing can contain up to 22 digits.

Using the Dialpad for External Dialing as En-Bloc Dialing

C

123456

C

D

123456

CDF

0123456

C

1123456

C

D

1123456

CDF

1123456

C

40

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Outgoing Calls

Number redial enables the user to redial the number which was last dialed.

g

Push the connect key.

You will hear the dial tone.

The telephone line is seized

z

Push the number redial key.

The telephone number is shown on the
screen; here, for example, the line code
1 and the telephone number 1 2 3 4 5 6
7 8 ;
the number is then dialed.

To Terminate the Call:

g

Push the connect key, or return the
mobile unit to the charging unit.

Note:

● The number redial memory can contain up to 22 digits.

● When a new number is entered, it replaces the previously-entered number.

● After pushing the number redial key, you can manually dial additional suffix digits. These suf-

fix-dialed digits are not stored in the number redial memory.

When using number redial as en-bloc dialing, you can select one of the last three numbers
dialed; this number will then be dialed.

z

Device is in idle state
Push number redial key,
the first telephone number appears.

z

Push the number redial key repeatedly.

The last three numbers dialed are
shown, one after the other.

g

Push the connect key in order to dial the

selected telephone number.

(Line code; here, for example, 0)

Note:

● When a new telephone number is entered (which is not one of the three telephone numbers

which are already in the memory), it replaces the previous number.

Number Redial

Number Redial as En-Bloc Dialing

C

D

CDF

1

CDF

112345678

C

C

12345678

C

34567890

CCDF

034567890

41

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Outgoing Calls

ü Push internal key.

Your station number is displayed; here,
for example, 1.

o

Enter the station number to be called,
i.e. push one of the keys 0 to 9; here, for
example, 2.

The station number of the mobile unit being
dialed is shown; here, for example, 2.
You will hear the internal ring tone.

The station answers, after seeing on the
screen which station number is calling.
Carry on the internal call...

To Terminate the Call:

g

Push the connect key or return the
mobile unit to the charging unit.

Note:

● Internal station numbers 0 to 9 are available on the Gigaset 1054.

● To view the internal station number on the base station currently in use, press the internal

key. To terminate, return the mobile unit to the charging unit or press the connect key.

● If the mobile unit is already engaged in an internal call when an external call arrives, a so-

called camp on (call waiting) tone (see page 37) is signalled.
In this case: Terminate the internal call by returning the mobile unit to the charging unit or by
pressing the connect key. Pick up the external call after hearing the ring tone (“Call Pickup”,
see page 36).

For more information about collective call, see page 68.

ü Press the internal key.

Your station number is displayed; here,1.

* Push the star key.

All registered internal stations, mobile
units and auxiliary devices are displayed
and rung.
You will hear the internal ring tone.

One of the stations answers;
here, for example, 3
You carry on the internal call...

To Terminate the Call:

g

Push the connect key or return the
mobile unit to the charging unit.

Internal Call to Another Mobile Unit or Auxiliary Device

Internal Dialing with Collective Call

CDG1CDG

2

C

CDG1CDG

236

CDG

3

C

42

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Outgoing Calls

You can store 10 frequently-used numbers as speed dial numbers. The programming of speed
dialing numbers is described on page 46.

g

Push the connect key.

You will hear the dial tone.

ö Push the speed dial key.

Finding and Dialing Speed Dial Numbers

ö Push the speed dial key repeatedly until

the memory location of the desired tele­phone number appears (here, for
example, memory location 8).

o Enter the digit shown (here, 8) in order

to dial the phone number.

or
Direct Dial of Speed Dial Numbers

o Enter the desired memory location

(here, 8).

The phone number stored at that
memory location is dialed.

To Terminate the Call:

g

Push the connect key or return the
mobile unit to the charging unit.

Note:

● Speed dial numbers can also be dialed as en-bloc dialing.

● You can also suffix dial additional digits.

● Speed dial numbers are not stored in the number redial memory.

Dialing Speed Dial Numbers

CDF

1

CDF1CDF

8 1 23456

CDF

1123456

CDF

1123456

C

43

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit During the Call

An existing call can be placed on hold, for example in order to consult with someone in the room.
During this time, the person on the other end of an external call hears music.

Placing an Internal Call on Hold

b

You are engaged in an internal call.

ü Push the internal key.

The station number of the internal sta­tion and INT blink.

e

Push the signal key in order to retrieve
the call.

Placing an External Call on Hold

b

You are engaged in an external call.

ü Push the internal key.

EXT blinks on the screen.

e

Push the signal key in order to retrieve
the call.

Note:

From within the hold status, you can carry out other switching functions; you can, for example,

.... Carry on a confidential consultation (see page 48),

.... Transfer the call on hold to the consultation partner (see page 48),

.... Toggle between the call on hold and the consultation call

(Toggle, see page 50),

.... Set up a 3-way conference (see page 51) (with the call on hold and the consultation

partner).

Placing a Call on Hold

CDG

3

CD G

3

CDG

3

CD F

123456

CD F G

1

CDF

123456

44

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit During a Call

You can set the handset volume on your mobile unit; it has three levels (1=normal to 3=loud) .
This adjustment is possible either during a call or when the unit is in ON status.

b

You are engaged in a call...

w

= Press these keys in sequence.

The current setting is shown.
(initialization status)

!...§ Push the keys (1...3) (e.g.2)

w

Push the enter key again.

The volume setting is changed.

Display after the handset-loud setting:
Level 2

(Display only in idle status)
Level 3

If you do not want your call partner to hear you (for example, if you want to consult with
someone in the room), you can temporarily set the mobile unit on mute during an external call.

b

You are engaged in a call...

Mute Feature Activated:

ü Push internal key.

Your call partner cannot hear you. The
line code is displayed
(for example, 2).

Mute Feature Deactivated:

Consulting in the room ...

e

Push the signal key.

Your call partner hears you once again.

b

You continue your call...

Setting the Handset Volume

Mute Feature

CDF

12345678

A

CDF

0 1

A

CDF

0 2

CDF C

C

CDF

12345678

2

CD F G

CDF

12345678

CDF

12345678

45

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit During a Call

If your Gigaset 1054 is connected to a telephone line with tone dailing, then the following is not
relevant for you.
If your Gigaset 1054 is connected to a line with pulse dialing (DPS), you have the option of tem­porarily switching the dialing mode of your Gigaset 1054 from DPS to DTMF (tone dialing).
By switching the dialing mode from pulse to tone dialing, you can enter information via the dial­pad during a call, for instance in order to query an answering machine or voice mail, or to take
advantage of German Telekom AG services such as “City Call” or “Scall”, etc.

b

You have set up an external connection.

w

Push the enter key.

*

Push the star key.

The dialing mode is changed to tone
dialing.

You must dial at least one digit before you can temporarily change the dialing mode.
After you have switched, you can switch back and forth between the dialing modes during the

call, using the signal key e . After completing the call, the telephone reverts automatically to
the original dialing mode.

Digits and symbols which are entered while the phone is switched to the alternative dialing
mode are not stored in the repeat dial memory.

The tone dialing symbol appears only during the temporary change of the dialing mode, and dis­appears during an internal consultation.

At the initialization, the phone is set for tone dialing.
During the switchover, the call charges / length of call display is suppressed.

Temporary Switch to Tone Dialing

CDF

123456

A

CDFCDEF

123456

Hinweis:

46

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Speed Dial

You can save 10 frequently-used telephone numbers. The procedure for dialing speed dial num­bers is described on page 42.

Notebook Feature:

You can also program telephone numbers as speed dial numbers during a call.

w

ö

Push the enter and speed dial keys.

o Push one of the digit keys -- 0 to 9 -- to

select a memory location
for example, 8.

The selected memory location “8” is
displayed at the left; beside this is the
memory contents. If the memory loca­tion is empty, then z is displayed.
Otherwise, the number stored there is
shown; here, 3 3 3 3 3 3.

Confirm Stored Telephone Number:

w

Push the enter key;

the current number stored at memory
location 8 is confirmed.

Store New Telephone Number:

o Enter the new telephone number;

for example, 1 2 3 4 5 6.

w

Push the enter key.

Note:

● 10 speed dial numbers, each with up to 22 characters, can be stored; the characters can be

digit, pound, star and signal keys. In the case of longer telephone numbers, only the first 22
characters are stored.

● It is also possible to store numbers even if the unit is not connected to a base station.

● Change the telephone numbers by overwriting them.

● Notebook feature: A telephone number can be stored as a speed dial number even during a

call.

● If “No automatic line seizure” is activated, the first digit must be the line code (0, 1 or 2).

Speed Dial Numbers: Storing, Viewing or Changing

ACA

C

8 333333

C

A

C

8 1 23456

C

47

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Speed Dialing

w

Push the enter key.

(“

Push the 8 and 2 keys.

o Enter the mobile unit PIN

(see “Enter Mobile Unit PIN”).

Every digit entered replaces one dash
on the screen.

w

Push the enter key again.
All speed dial numbers are deleted.

Delete Speed Dial Numbers

A

C

A

C

8

- ---

2

A

C

8

--

2

C

48

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Switching Features

With your Gigaset 1054 system, you have the option of carrying on external as well as internal
consultation calls if the second telephone line is free. This feature could be used, for example, to
consult an external business partner.

b

You are engaged in an external call.

ü Push the internal key.

The line code
is shown; here, 1.

=...) Enter the station number desired; here,

2.

or Ring All Internal Stations:

* Push the star key.

You will hear the internal ring tone, an
internal station answers; here, station 2.
You carry on the call with the internal
station.

Call Transfer:

g

Push the connect key or replace the
mobile unit in the charging unit.

Or Terminate Internal Consultation and Return to the External Call:

e

Push the signal key.

You are reconnected to the external sta­tion. You continue with the external call.

Note:

● After dialing the internal telephone number, you can immediately transfer the external call to

that number by “hanging up.” This can be done even before the internal station answers.

● If the station to which you are transferring the call does not answer within 30 seconds, an

automatic recall occurs.

Consultation / Transfer Call

Internal Consultation

CDF

12345678

CD F G

1

CD F G

2 1

CD F G

0123

CD F G

2 1

C

CDF

12345678

49

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Switching Features

You have the option, with this system, of transferring an external call to another external number
as long as the second telephone line is available.

b

You are engaged in an external call.

If no automatic line seizure is activated:

=

dial 0 as the line code

ü #

Push the internal key and the pound key

o

Enter the external phone number to be
called.

You will hear the ring tone, and the sta­tion answers. You carry on a consulta­tion call with the external station.

You can also carry out this procedure from within an internal call.

Or Terminate External Consultation:

e

Push the signal key.

The external station which is on hold is
reconnected to you. You continue with
the original external call.

External Consultation

CDF

112345678

CD F

2

CD F

234567890

CD F

234567890

CDF

12345678

50

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Switching Features

During a consultation call, you can toggle back and forth between two existing calls as often as
you like. External toggle is also possible, if the second telephone line is available.

Toggle Between an Internal and External Station:

b

You are engaged in an external call.

ü

Push the internal key.

The line code is displayed;
here, 1.

=...), * Enter the station to be called; here, the

3.

Station 3 answers. You carry on the
internal consultation call.

ü # Push these keys in sequence to switch to

the external call.
To return to the internal call, repeat the
key combination.

Terminate the Internal Consultation Call:

e

Push the signal key.

Toggle Between Two External Stations:

b

You are engaged in an external call.

If no automatic line seizure is activated:

=

dial the 0 as line code

ü #

Push these keys to set up an external
consultation call.

o

Enter the desired external telephone
number. Carry on the external consulta­tion call.

ü # Push these keys in the sequence shown

here to switch back to the 1st external
call,

ü # Push these keys in the sequence shown

here to switch back to the 2nd external
call.

Terminate External Consultation Call:

e

Push the signal key to disconnect the
2nd external partner.

This procedure can also be carried out from within an internal call.

Toggle

CDF

1123456

CD F G

1

CD F G

3 1

CD F G

1123456

CDF

1123456

CDF

1123456

CD F

2

CD F

2345678

CD F

1123456

CD F

2345678

CDF

1123456

51

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Switching Features

During a consultation call, you can connect the two partners, thus setting up a 3-way conference.
An external 3-way conference is possible, as long as the 2nd telephone line is available.

3-Way Conference from Within an Internal Consultation Call:

b You are engaged in an external call.

ü Push the internal key.

Place external call on hold.

=...),*Enter the desired station number; here,

3.

Station 3 answers. You are engaged in
an internal consultation call.

w

e

Push these keys in sequence in order to
set up a 3-way conference.

Terminate 3-Way Conference:

e

Push the signal key to terminate the 3­way conference.

(the internal station is disconnected).

3-Way Conference from Within an External Consultation Call:

b You are engaged in an external call.

ü #

Push these keys to set up an external
consultation call.

=...) Enter the external number to be dialed.

The external consultation call is set up.

w

e Push these keys, in sequence, in order

to set up a 3-way conference call.

Terminate the 3-Way Conference:

e

Push the signal key to terminate the 3­way conference (the 2nd external part­ner is disconnected).

This procedure can also be carried out from within an internal call.

3-Way Conference

CDF

123456

CD F G

1

CD F G

3 1

CDF

G

3 1

CDF

123456

CDF

123456

CD F

2

CD F

2345678

CD F

21

CDF

123456

52

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Switching Features

You can forward an external call to another internal station. The call can only be forwarded to a
station which also has call forwarding activated.

w#)!

Push these keys in sequence.

=...) Use the digit keys to enter the station

number of the internal station to which
the call is to be forwarded.

=...) Use the digit keys to enter the number

of rings after which the call is to be for­warded.

w Press the enter key.

Note:

● An activated call forwarding is indicated by a “U” on the screen.

(Query by pushing ü).

w#)!

Push these keys in sequence.

w Press the enter key.

Note:

● The call forwarding display “U” (query by pushing ü) remains if additional call forwarding

functions are still active.

Activate Internal Call Forwarding

Deactivate Internal Call Forwarding

A

C

D

91

A

C

D

91 7

A

C

D

91 7 3

CAC

D91C

53

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Switching Features.

The door interphone can only be connected to auxiliary devices which have the internal station
number 9.

Call from door interphone is signalled
(3 short tones).

g

Push the connect key. This connects
you with the door interphone.

ü )

Push these keys in sequence to activate
the door opener. The door opener is
activated for 3 seconds. You can acti­vate the door opener repeatedly.

The connection with door interphone
remains set up.

g

Push the connect key in order to termi­nate the connection to the door inter­phone.

Connection with the Door Interphone

C G

9

CDG9CDG9CDG9C

54

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Call Charges, Call Length

The automatic call length display is activated after the last digit is dialed. The display remains
visible for 4 seconds after the end of the call.

w#!o

Push these keys in sequence and then
enter the system code .

Every digit entered replaces one dash
on the screen.

!“ Select either external telephone line 1

or 2.

z

)

&

Push these keys in sequence.

After digits are entered, the current
setting is shown.

1

or 0 To activate, push the 1 key (initialization status).

To deactivate, push the 0 key.

w Push the enter key.

The call length display is
activated or deactivated.

Call Length Shown on the Screen:

Note:

● The call length display can show a maximum of 99 minutes and 59 seconds.

● If the call is longer than this, the display counter starts again at 00-00.

Display of Call Length: Activate / Deactivate

A

C

D

1____

A

C

D

1 __

A

C

D

0 12

A

C

D

96 1

C

Min. Sec.

CDF

00-00

55

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Call Charges, Call Length

Before you can use this feature, you must first request from the German Telekom AG the
transmission of the call charge data, if this service has not already been requested for
your phone. However, please note that, for technical reasons, the charges on your telephone bill

may differ from those shown on the screen. The Telekom unit counter is always the official indi­cator. The following are recorded:

– Call charges or call charge units for an individual call from the mobile unit,
– Total call charges or call charge units for the mobile unit,
– Total call charges or call charge units per telephone line,
– Total call charges or call charge units for the entire system.

Note: If the call charge / call charge units display is activated/deactivated, the call length display
is deactivated.

w#!o

Push these keys in this sequence and
then enter the system code.

Every digit enters replaces one dash on
the screen.

!“

Select external telephone line 1 or 2
.

z

)

&

Push these keys in sequence.
.

After digits are entered, the current
setting is shown.

“or

=

To activate, push the 2 key

To deactivate, push the 0.

w Push the enter key

.

Examples
Call Charge Display:

Total of 23.46, with individual call charge
of 2.07 for the mobile unit, if call charge
factor is set.

Call Charge Unit Display

Total of 598, with 46 individual call
charge units for the mobile unit, if call
charge factor is 0.00.

Activate / Deactivate Display of Call Charge or Call Charge Unit

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

96 1

C

CDF

2346 207

.

.

CDF

000598 0046

56

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Call Charges, Call Length

If this feature is activated (the call charge display must also be activated), the charges for the pre­vious call are shown after the line is seized. This is ideal, for instance, for hotels or inns which
wish to see the call charges for a guest. For resetting options for the charges, see “Delete Call
Charge Total” on page 57.

w#!o

Push these keys in sequence and then
enter the system code.

Every digit entered replaces one dash
on the screen.

0 0 for both telephone lines

z*0 Push these keys in the sequence shown

.

1or

=

Push the 1 to activate.

Push 0 to deactivate.(initialization status)

w

Push enter.

If the units / charge display is activated, the mobile unit automatically shows the units. If you
want to see the charge, you must enter the charge factor. The charge factor is valid for all ter­minal devices connected to Gigaset 1054.

w#("o

Press these keys in the sequence
shown here. Then enter the system
code. Every entry replaces one of the
dashes.

The current setting is shown;
here, 0.00

o

Enter the call charge factor (for example,
.12).
Pushing the star key allows the decimal
point to be displayed or not displayed.

w

Push the enter key.

Note:

If the call charge factor is entered or changed, all previous individual / total entries are deleted. In
order to view the charge factor, follow the procedure, deleting the step “Enter call charge fac­tor.”To display the units again, enter “0.00” as charge factor. The charge factor can be program­med up to 9.99 or 999, and is valid for all stations.

Call Charge Display of Previous Call: Activate / Deactivate

Call Charge Factor: Viewing or Setting

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

n

0 0

CAC

D

8 ____2

A

C

D

0. 00

A

C

D

0. 12

C

57

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Call Charges, Call Length

w#(§o

Push these keys in the sequence
shown. Then enter the system code.
Every entry replaces one dash.

The registered internal stations are dis­played.

View Total Charges

0...) Enter the internal number.

The total charges for this station are dis­played.

.

ü Push this key in order to view total

charges for another station.

0...) Enter the next internal number for which

you want to view the call charges.

w Push the enter key again.

or
Delete Charge Total

0...) Enter the internal number

desired.

The total charge for this station is
shown.

0 Push this key in order to delete the total

charges for the selected station.

ü Push this key in order to view other total

charges, or

w Push the enter key again.

Note:

● At the right side of the screen you will see the charges incurred for the current call; at the

left, the total charges incurred for this station up until this point.

Call Charge Totals per Internal Station: View / Delete

A

C

D

8 ____ 3

A

C

D

n

12 456

A

C

D

33.00 2.00

A

C

D

5.

60

1.00

CAC

D

5.60 1.00

A

C

D

0. . 00 0.00

C

58

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Call Charges, Call Length

w#(§o

Press these keys in the sequence
shown, and then enter the system

code. Every entry replaces one of the
dashes.
The registered internal
stations are displayed.

View the Total Charges

*0!“

Select external telephone line 1 or 2;
Press 0 to select both.

ü

Push this key in order to view the total
charges for other numbers

or

w

Push the enter key to complete
the procedure.

Delete Charge Total

*0!“

Select telephone line 1, 2; or push 0 to
select both. This selects the individual
telephone line or the total system
charge.

0

Push this key to delete the total charges
for the selected line or for the system.

ü

Push this key to view total charges for
another internal number

or

.

w

Push enter key.

Note:

● At the right of the screen, you will see the charges for the current call; at the left, the total

charges incurred up until this point per telephone line.

Call Charge Totals per Telephone Line: View / Delete

A

C

D

8____3

A

C

D

n12 456

A

C

D

012

A

C

D

5. 90 3. 00

C

DAC

D

5. 90 3. 00

A

C

D

0. . 00 0. 00

C

59

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

Using the system lock, you can lock your base station. This ensures that no outgoing calls can be
made.

Exception: Calls to an emergency number are possible if these numbers are stored. Up to four
16-digit numbers can be stored (page 60).

Incoming calls can still be accepted when the system is locked.

w#“$o

Press these keys in the sequence

shown

and enter the system code.

Every digit entered replaces one dash
on the screen.

The current setting is displayed.

1

or

=

To activate, push the 1 key.
To deactivate, push the 0 key (initialization status).

w Push the enter key.

The system lock is activated or deactiva­ted.

Note:

● If you have programmed system lock with emergency numbers as well as telephone lock

with hotline, no dialing is possible.
Exception: When the emergency number is the same as the hotline number.

Lock for Outgoing Calls (System Lock): Activate / Deactivate

A

C

D

2 ____4

A

C

D

2 __4

A

C

D

1

C

60

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

In an emergency, it is important to be able to dial emergency numbers even if the system is
locked. You can program four 16-digit numbers for this.

w#“%o

Push these keys in the sequence shown
and enter the system code.

Every digit entered replaces one dash
on the screen.

z To scroll through the emergency num-

bers, push the repeat dial key repeat­edly.

Here slot 2 is empty.

0...) Enter the emergency number for slot

number 2.
Already-existing emergency numbers

can be changed by overwriting them.

z To scroll further, press the repeat dial

key. All emergency numbers can be
entered in one step.

w Push the enter key.

w#“/o

Push these keys in the sequence shown
and enter the system code.

Every digit entered replaces one dash
on the screen.

w Push the enter key.

All emergency numbers are deleted.

Emergency Numbers: Store / View

Delete Emergency Numbers

A

C

D

2____5

A

C

D

2 __5

A

C

D

1 110

A

C

D

2 z

A

C

D

2 112

A

C

D

3 z

C

A

C

D

2____7

A

C

D

2 __7

C

61

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

The storage of barred numbers enables you to prevent numbers from being dialed which begin
with a barred number. Thus, for example, if the barred number “00” is stipulated, international
calls cannot be made. For each mobile unit and for each telephone, you can store up to three
barred numbers (1 to 8 digits in each case). To activate the barred numbers, see “Activating /
Deactivating Barred Numbers” on page 62.

w#(%o

Push these keys in the sequence shown
and enter the system code.

Every digit entered replaces one dash
on the screen.

The registered stations are then dis­played.

=...) Pus these keys to select a station ;

the first, here empty, barred number
slot is displayed.

Viewing

z Push the repeat dial key

.

Additional barred number slots are dis­played;

z Push the repeat dial key again.

The third barred number is displayed,
etc.

or Enter Barred Number

z Push the repeat dial key.

o

Enter the barred number, e.g. 00;
if desired, enter 2nd and 3rd barred

number

ü

Push to select other internal stations

or

w

Push the enter key.

Note:

● Changes can be made by overwriting.

Barred Numbers: Store

A

C

D

8 ____5

A

C

D

8 __5

A

C

D

01 23

A

C

D

1 z

A

C

D

2 00

A

C

D

3 0190

1 z

A

C

D

1 00

C

62

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

More information about the barred numbers is found on page 61.

w#($o

Push the keys in the sequence shown
here and then enter the system code .

Every digit entered replaces one dash
on the screen.

A list of the registered stations is dis­played.

=...) Push these keys to select stations. The

current settings are displayed.

1 or

=

Push the 1 key to activate,

and the 0 key to deactivate (initialization status) .

w

Push the enter key.

Note:

When a barred telephone number is entered, you will first hear the negative acknowledgment
tone and then the busy tone.

For more information on barred numbers, see page 61.

w#(/o

Press the keys in the sequence shown
here and then enter the system code.

Every digit entered replaces one dash
on the screen.

A list appears of the stations which have
a barred number programmed.

=...) Push these to select stations; here, the

3 has been selected.

w Push the enter key.

The barred numbers for station 3 are
thereby deleted.

Activate / Deactivate Barred Numbers

Delete Barred Numbers

A

C

D

8 ____4

A

C

D

8 __4

A

C

D

01234

A

C

D0C

A

C

D

8 ____7

A

C

D

8 __7

A

C

D

1 34

A

C

D

1 4

C

63

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

By setting the COS for every registered mobile unit and telephone, you can stipulate which sta­tions are allowed to place toll calls.
At initialization, all devices have full trunk authorization.

1. Full trunk authorization (= initialization status)
The device is capable of making outgoing and receiving incoming external calls.

2. Incoming authorization

The device is capable only of receiving incoming calls. All external dialing is blocked.

3. Internal authorization

The device can only make internal calls. All external dialing is blocked. Users can set up a
consultation call with an authorized internal station, but cannot transfer an external call; the
call is returned in this case.

w#!o

Press the keys shown in the sequence
shown; enter the system code.

Every digit entered replaces a dash on
the screen.

!“

Select external telephone line 1 or 2
.

z

*

!

Press the keys shown in the sequence
shown

A list of the registered stations is
shown.

o

Enter the internal number of the mobile
unit or auxiliary device to be set, i.e.
push one key between 0 and 9; here,
the 2.

The current setting is shown.

1

To activate full trunk authorization Push the 1 (initializ. status)

or

0

For incoming authorization Push the 0

or

“ For internal authorization Push the 2 .

w Push enter key to end the procedure

● If your Gigaset 1054 is only being operated on one external telephone line (L1), all authoriza-

tions for the second line (L2) should be programmed for “internal.”

Set Class of Service for the Internal Stations

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

n

1 0123

A

C

D

n

1 2 1

C

Hinweis:

64

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

You can lock your mobile unit, thus preventing unauthorized or unintentional use.
If you have programmed a hotline number, then only this hotline number can be dialed.
If no hotline number is programmed, only incoming calls are possible.
To unlock the mobile unit, see page 66.

w Press the enter key.

(

Press the 8 key.

!

Press the 1 key

.

o Enter the mobile unit PIN.

Every digit entered
replaces one dash on the screen.

w Push the enter key again.

The mobile unit is locked.

Example:

Display without hotline number.

Display with hotline number.

Note:

● After locking the mobile unit, the enter key can only be used to

unlock it (within 3 seconds) or to dial the hotline number.

● If you want to lock the mobile unit, without programming a hotline number, any hotline num-

ber which was already programmed into the unit must first be deleted. See “View /Delete /
Enter Hotline Number,”page 65.

● We recommend that you check to make sure that the number is correctly entered by making

a test call.

Locking the Mobile Unit / Activate Hotline

ACA

C

8

A

C

8____1

A

C

8 __1

CHC

H

0123

65

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

You can lock your telephone to prevent outgoing calls while still allowing one hotline number to
be dialed. In this case, only this stored hotline number can be dialed. This can, for instance, be
the number under which you can be reached during your vacation.

w

Push the enter key.

( Push the 8 key.

(

Push the 8 key.

o Enter the mobile unit PIN.

Every digit entered
replaces one dash on the screen.

View

After the last digit is entered, the hotline
number which has been programmed
is displayed; here, for example, 0123.

or delete

z Press the number redial key.

or enter

z Press the number redial key.

o

Enter the desired telephone number.

It is shown on the screen;
here, 1 2 3 4 5 6 7 8 .

w Push the enter key.

Note:

● A hotline number can have up to 22 characters, consisting of digits,

pound, star and signal keys.

● A hotline number, programmed via “Enter barred number,” is not dialed.

● If automatic line seizure is not activated, the 1st digit must be the line code (0,1 or 2).

Hotline Number: View / Delete / Store

ACA

C

8

A

C

8____8

A

C

8 __8

A

C

0123

A

C

ACA

C

12345678

66

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Lock

Mobile unit is locked.

o Push any key.

The hotline number is dialed.

g To terminate the call:

Push the connect key.

Mobile unit remains locked.

Mobile unit is locked.

w Push the enter key.

The memory is opened.
Display without hotline number
or
with hotline number.

( Push the 8 key within 3 seconds.
0 Push the 0 key.

o Enter the mobile unit PIN.

Every digit entered replaces one
dash.

w Push the enter key.

The mobile unit is unlocked.

Note:

● After pushing the enter key, the 8 key must be pushed within 3 seconds (otherwise, the hot-

line number will be dialed)

Dial Hotline Number

Unlock Mobile Unit

C

H

0123

CDF

H

0123

C

H

0123

A

C

H

0123

A

C

8

A

C

8____0

A

C

8 __0

C

67

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

You can stipulate which types of devices can be connected at each station.
Cordless devices (1 to 8) can be mobile units, or devices such as Gigaset 1000TAE which can, for

example, be used to connect telephones and fax machines to Gigaset 1054 without cords. For
these stations, “mobile unit” is pre-set.

For non-cordless connections (0 and 9), the device type “telephone” is pre-set. Modems or fax
machines should preferably be connected to the 0 station, a door interphone can only be connec­ted to station 9.

w#!o

Press the keys shown in the sequence
shown here and then enter the system
code.

Every digit entered replaces one dash
on the screen.

= Push this key for both telephone lines

z#= Push these keys in this sequence.

Internal station 0 with the “telephone”
setting is displayed

Selecting the Internal Station

z

To select the internal station, push the

repeat dial key multiple times.

The registered stations appear with
their current settings

Example: Mobile unit is set for Internal
1, modemi is set for Internal 0.

Setting for the Equipment to be Connected

Different Types of Equipment:

Digit Key Equipment Type

0 No function
1 Mobile unit
2 Telephone
3 Modem
4 Fax device
5 Door interphone
6 Neutral

(Telephone and Fax)

= ... & Push the digit key to select the type of

equipment; here, non-cordless connec­tion Internal 0 with fax

w

Push enter key.

Set the Connection Configuration for Internal Stations

A

C

D

1____

A

C

D

1 __

A

C

D

0 2

1 1

A

C

D

A

C

D

03

A

C

D04C

68

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

With the ring allocation for external telephone lines, you can stipulate which mobile unit or auxi­liary devices should be rung when an external call arrives. The ring allocation is carried out by
entering the internal number in the list of the collective call group or in the group list of the ring
allocation.
Stations which are to receive external calls must, as a minimum, have the COS “incoming call
authorization” (see the chapter „Set Class of Service for the Internal Stations“ on page 63).
Up to 10 stations, of which 8 can be mobile units, can be placed in the lists for collective call or
call diversion.
For stations which are already engaged in an external or internal call, call waiting is signalled.

Collective Call

● At initialization, collective call is set for all stations.

● An incoming external call is signalled on all registered mobile units and auxiliary devices and

can be picked up by any mobile unit or auxiliary device.

● Through programming, an individual call can be routed to only one station in the collective

call list.

● Groups of stations which are part of the collective call group

At the time of registration, the stations are automatically placed in the collective call list. This
can be changed subsequently.

Example:

External telephone line Allocated internal stations

1 1
2 2, 3, 4

Group Call with Call Diversion Pickup

● An incoming external call for telephone line L1 is first signalled 3x at mobile units 2, 3 and

can be picked up there. If mobile units 2 and 3 cannot accept the call, the call is diverted to
the second call group (with mobile units 6, 7) .

Example:

External Allocated internal stations Ring (after
telephone line Group 1 Group 2 call diversion) at
1 2, 3, 6, 7 6, 7 2, 3, 6, 7

Ring Allocation for External Calls

69

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

For more information about this, see page 68.
If more than 6 cordless stations are in operation at once, the telephone number will only be dis­played at the first five devices which are rung. The last registered stations are affected by this.

w#!o

Push the keys shown in the sequence
shown here and then enter the system
code.

Every digit entered replaces one
dash on the screen.

!" Select external telephone line 1 or 2,

z*" Push these keys in this sequence

!

Push key 1 for the collective call group

0 ... )

Push the digit keys of the internal num­bers desired in order to place them in
the list of stations.

Stations with this internal number are
allocated to the telephone line selected.

w

Push the enter key to complete
the procedure.

Example:

External telephone line Allocated internal stations

1 2, 3, 5

If, for example, an external call arrives for line 1, stations 2, 3, 5 are rung simultaneously.

Ring Allocation: Enter or Change Collective Call Group

A

C

D

1____

A

C

D

012

A

C

D

n2

A

C

D

n

2 1 0123

A

C

D

n

2 1 0123 6

C

70

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

For more information about this, see page 68.
If more than 6 cordless stations are in operation at once, the telephone number will only be dis­played at the first five devices when they are rung. The last registered stations are affected by
this.

w#!o

Push the keys shown in the sequence
shown here and then enter the system
code.

Every digit entered replaces one dash
on the screen.

!" Select external telephone line 1 or 2,

z*" Press these keys in this sequence

.

" Push 2 for call diversion pickup

0 ... ) Push the digit keys of the desired inter-

nal numbers.
This selects the stations for the call
group 1.

# Push the pound key for the 2nd call

group.

0 ... ) Push the digit keys of the desired inter-

nal numbers. This selects the stations
for the call group 2.

w

Press the enter key to complete
the procedure.

Example:

External telephone line Call group 1 Call group 2
1 2, 3, 5 1, 7

If, for example, an external call arrives for line 1, the stations with the internal numbers 2, 3, 5 are
rung simultaneously; afterward, the stations with the internal numbers
2, 3, 5, 1, 7 are rung.

Ring Allocation: Enter or Change Group Call

A

C

D

1____

A

C

D

012

A

C

D

n2

A

C

D

n2 2

A

C

D

n

2 2 012

A

C

D

n

2 2 012-

A

C

D

n

2 2 012- 34

C

71

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

For more information about this, see page 68.
You can set the number of ring cycles after which group 1 should answer. If there is no answer
after this number of rings, call group 2 is automatically rung. The factory setting at initialization is
3 ring cycles. You can choose anywhere from 1 to 9 tone rings.

w#!o

Push the keys shown in the sequence
shown here and then enter the system
code.

Every digit entered replaces one dash
on the screen.

!" Select either external telephone line 1

or 2.

z*& Push these keys in this sequence.

! ... ) Push the key for the desired number of

ring cycles. Here, 2

w

Push the enter key.

Example:

External telephone line Call group 1 Call group 2

1 2, 3, 5 1, 7
If an external call arrives for telephone line 1, the stations with the internal numbers 2, 3, 5 are
first rung simultaneously 2 x. After that, the stations with the internal numbers 2, 3, 5, 1, 7 are
rung.

Ring Allocation: Enter or Change Number of Ring Cycles for Group Call

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

n6

A

C

D

n

6 2

C

72

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

If you want to set up a door interphone, you can stipulate which internal stations should be rung
from the door interphone. These internal stations can then activate the door opener.

w#!o

Push the keys shown here in the
sequence shown and then enter the
system code.

Every digit entered replaces one dash
on the screen.

0 Select 0 for both telephone lines.

z#& Push these keys in this sequence.

0 ... ) Push these keys to enter the internal

numbers for the station call list

w Push the enter key in order

to complete the procedure.

Every mobile unit can be unregistered using that unit or any other mobile unit.

w#/"o

Push the keys shown in the sequence
shown here and then enter the system
code.

Every digit entered replaces one dash
on the screen.

All registered internal stations appear on
the screen; here 1 to 8.

o

Enter the station number of the mobile
unit to be unregistered, i.e. push one of
the digit keys, here, for example, 2 and

5.
When the 5 is pressed again, the digit
reappears, i.e. mobile unit 5 has not
been unregistered.

w

Push the enter key, in
order to complete the procedure.

Mobile unit 2 is unregistered.

Note:

To register a mobile unit, see page 19.

Ring Allocation for the Door Interphone

Cancel registration Mobile Unit

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

-6 0

A

C

D

-6 123

CAC

D

7____2

A

C

D

7 __2

A

C

D

12345678

A

C

D

1 34 678

A

C

D

1 345678

C

73

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit System Settings

You can reset the base station to its initialization status, for example if you feel that you no longer
have a clear overview of the current settings. In order to keep this as simple as possible, how­ever, not all settings are reset.
This procedure accomplishes the following:

a) Resets to initialization b) Deletes: c) Does not change:

status

Settings Units/Charges System code
Configuration Emergency numbers Registration of mobile units

Barred numbers Ring allocation

w#!o

Push the keys shown in the sequence
shown and then enter the system
code.

Every digit entered replaces one dash
on the screen.

0 Select 0 for both telephone lines.

z

"%0

Push these keys in this sequence
to reset to initialization status.

w

Push the enter key.

Resetting the Base Station to the Status at Initialization

A

C

D

1____

A

C

D

1 __

A

C

D

012

A

C

D

25 0

C

74

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Mobile Unit Settings

The mobile units are pre-set for optimum ease of operation. You can change these settings indi­vidually for each mobile unit.

When this tone is activated, a tone is heard whenever a key is pushed.

w§!

Push enter and keys 3, 1.
The current setting is shown.

=

or

1

Push the 1 to activate ( initialization status)
Push the 0 to deactivate.

w Press the enter key.

When the tone is activated, every erroneous entry is signalled acoustically.
w§$ Push enter and keys 3, 4.

The current setting is shown.

=

or

1

Push the 1 to activate (initialization status)

Push the 0 to deactivate.

w Press enter key.

If this tone is activated, only correctly completed settings are acoustically signalled.
w§/ Push enter and keys 3, 7.

The current setting is shown.

=

or

1

Push the 1 to activate (initialization status)
Push the 0 to deactivate.

w Press enter key.

Advisory and Alarm Tones: Activate / Deactivate

Key Acknowledgment Tone: Activate / Deactivate

Negative Acknowledgment Tone: Activate / Deactivate

Positive Acknowledgment Tone: Activate / Deactivate

A

C

31 !

C

A

C

34 1

C

A

C

37 1

C

75

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Mobile Unit Settings

If this tone is activated, an alarm is sounded when the battery needs to be exchanged.
w§" Push enter and keys 3, 2.

The current setting is shown.

=

or

1

Press the 1 to activate (initialization status).
Press the 0 to deactivate.

w Push enter key.

If this tone is activated, the range limit is signalled.
w§§ Push enter and digit keys 3, 3.

The current setting is shown.

=

or

1

Push the 1 to activate (initialization status).
Push the 0 to deactivate.

w Press enter key.

If the tone is activated, an acoustic signal is heard when the mobile unit re-enters the base sta­tion range.

w§% Push enter and keys 3, 5.

The current setting is shown.

=

or

1

Push the 1 to activate (initialization status).
Push the 0 to deactivate.

w Press enter key.

Battery Alarm Tone: Activate / Deactivate

Range Alarm Tone: Activate / Deactivate

Synchronization Tone: Activate / Deactivate

A

C

32 1

C

A

C

33 1

CAC

35 1

C

76

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K06.FM

Operation with Standard Mobile Unit Mobile Unit Settings

This procedure accomplishes the following:

a) Reset to initialization status: b) Delete:

Mobile unit is ON.

w Press enter key.

(

ö

Push the 1 and speed dial key.

Enter mobile unit PIN.

o Every digit entered replaces one dash

on the screen.

w

Press enter key.

The settings are reset / deleted.

Note:

● The mobile unit PIN is not deleted or reset.

Resetting the Mobile Unit to Initialization Status

• Repeat dial memory

• Speed dial memory

• Tone ring volume

• Tone ring pitch

• Battery alarm tone

• Range alarm tone

• Synchronization tone

• Automatic call acceptance

•

Acknowledgment tones

C

A

C

DAC

D

1____z

A

C

D

1 _z

C

77

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Using the Menu

The bottom line of the Comfort mobile unit display has two
fields with dark backgrounds. These show the features, which
are based on the status.
These features can be activated, when needed, using the dialog
keys below them.

Example:

To set up a consultation call, use the dialog key ä for the fea­ture “CONSLT.”

In the description below, the name of the feature is used instead of the term dialog key. To acti­vate a specific feature, press the dialog key below it.

The menu key ßis found in the middle, between the two dialog keys. With this, you can easily
activate menus for switching and for setting functions, either in idle status or during a call.

The main menu is at the left of the display. This appears after the
F-key is pressed in idle status.

Three lines of the menu appear on the display. The entire menu
appears below.

The top line has a dark background.
Using the dialog key below “OK,” you can select this feature .
Using the dialog key below “NEXT,” you can scroll through the

menu. Each menu line moves up one line, thus displaying the
other menu lines.

In order to select a function using the dialog key “OK,” you must
scroll with “NEXT” until the desired function is highlighted (dark
background).

Using the dialog key “NEXT,” you can scroll through the entire
menu.

The line with “- - - -” indicates the end of the menu.

Using the Dialog Keys

Using the Menu

The Entire Menu

External 1

0123456

F

CoNSLT.

Dialog keys

MUTE

Telephone Book

OKNEXT

F

Number redial
Telephone lock

Number redial
Telephone lock
Tones
Settings
Search station
Service

- - - - - - - - -

Tel.book

78

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Using the Menu

The menu structure for settings is set up as a hierarchy. Generally, settings are first made in idle
status. Additional settings options are also offered in other operating statuses (see “Status­Dependent Menus“).

You can move to the desired setting step by step. The ßkey also allows you to scroll backward
through the menu levels (Main Menu - Service - System Settings - Equipment Data). Thus, you
can scroll back quickly through the levels.

If you want to terminate the process -- from any point within the menu structure -- without
changing anything, push the connect key gonce, or if necessary twice.

Your Comfort mobile unit initiates an automatic cancel after 30 seconds if you do not push any
key within this time.

Example:

In order to program call forwarding, for instance, the following steps must be carried out (from
idle state): Push the ß key; go to the “Service” menu from the main menu; from the Service
menu, select “Forward.ON.”

Below is a rough overview of the menu structure for the system settings:

Menu Structure for System Settings

Telefonbuch

Cancel registr.
System setting

- - - - - - - -

Duration/Units
Call barring
Change sys.code
System lock
Initialisation
Line data
Equipment data

- - - - - - - -

Service menu

ß

Idle State

Call pickup
Access rights
a/b line

- - - - - - - -

Equip. data

OK

NEXT

Number redial
Telephone lock
Tones
Settings
Search station
Service

- - - - - - - -

Main menu

NEXT

NEXT

OK

OK

NEXT

Menu for system
settings

ß

ß

ß

Telephone book

Forward.ON

Sys cd/Mn sys cd

Autom.seizure

79

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Using the Menu

Using the ß key, appropriate menus can also be activated from different operating statuses,
such as call status, internal call, external call or consultation status.

Example 1 “In Internal Call”

You are engaged in an an internal call...

Push.

Menu appears (Entire menu at left).

You can select appropriate functions with
“NEXT” and then confirm with “OK”.

Example 2 “External Consultation in External Call“

You are engaged in an external call...

Push this to set up an
external consultation call.
.

Push.

You can select appropriate functions
with “NEXT” and
confirm with “OK.“

Status-Dependent Menus

Internal
Call with 2

MUTE CONSLT.

ß

Handset Volume

Telephone book

OK

Ext. consultat’n

NEXT

Handset Volume
Telephone Book
Ext. Consultation

-------------------------

External 1

00:01:01

CONSLT.

MUTE

CONSLT.

External2

Please dial

TEL.BOOK

REDIAL

ß

Resume

MUTE

OKNEXT

Handset volume

Resume
Mute
Handset volume

-------------------------

Telephone book

80

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Standard Settings

For your own protection, you can enter a new four-digit system code for the system. This pro­tects your settings and prevents registration of additional mobile units.
All entries are carried out from a mobile unit. At the time of initialization, the system code is set
at “0000“.

The Comfort mobile unit is in idle status.
Push this key; main menu appears..

Scroll with NEXT ...
Until “Service“ appears in the 1st line of the

main menu and ...
select “Service” with OK .

The next menu level appears.

Scroll with NEXT...
until “System settings” appears in the 1st

line of the menu and
then select with OK.
Enter the four-digit system code

if necessary, correct with .

Scroll with NEXT...
until “Change sys. code” appears in the 1st

line
and then select with OK.
Enter new system code, please be sure to

note this number!

Every digit entered replaces one dash

if necessary, correct with .
Complete the entry.
Repeat the new system code.

Every digit entered replaces one dash..

Push this key to complete the entry.

Note:

● If you have entered an erroneous system code, a negative acknowledgment tone will be

signalled.

● If you forget the system code, it will be necessary to disassemble the device. Forgetting the

system code is like losing a key. If this happens, please get in touch with your vendor.

Enter / Change System Code

a

ß

Telephone book

Number redial

OK

Telephone lock

NEXT

Service

- - - - - - - -

OK

Telephone book

NEXT

Service

System settings

Change Sys. code

Forwarding ON

Cancel registr.

OK

System settings

NEXT

System code

Enter:

* * _ _

OK

System settings

- - - - - - - -

OK

Call Forward. ON

NEXT

Sys cd/Mn sys cd

Duration/Units

OK

Call barring

NEXT

o

Enter

new sys.code:

4 7 _ _

OK

OK

o

Repeat
new sys. code:

* * _ _

OK

OK

81

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Standard Settings

If you would like the display texts to appear in a language other than the one which is already set
(German), you can select between either German, English, French, Italian or Spanish for each
device.

The Comfort mobile unit is in idle status.
Push the F-key; main menu appears:
Scroll through main menu with NEXT
until “Settings” appears in the 1st line,
and select “Settings” with OK.
Select “Language” using same procedure.
Scroll with NEXT and

select desired language with OK.

You can set the tone ring individually, including the volume, pitch and melody. The tone ring
volume has 7 levels, the tone ring pitch (tone sequence frequency) has 10 levels and the tone
ring melody has 10 levels.

The Comfort mobile unit is in idle status
..
Push the F-key; main menu appears:

Scroll through main menu with NEXT ..
.
until “Settings” is on the 1st line,

and select “Settings” with OK.
Select “Tone ringing” in the same manner

from the next menu.

Menu appears (entire menu at left).

Using NEXT / OK, you can select and
edit the following options
:

Using NEXT, select the desired volume level
(you can hear the volume while doing this) and
store with SAVE.
Tone ringing can be switched off completely.
.

Set in the same manner as tone ring volume.

Set in the same manner as tone ringing volume.

Set Dialog Language

Set Tone Ringing for Mobile Unit

a

ß

Telephone book

Number redial

OK

Telephone lock

NEXT

Settings

Language

Settings

Search station

OK

Service

NEXT

Active: German

New: English

OK

New: French

NEXT

a

Telephone book

Number redial

OK

Telephone lock

NEXT

ß

Settings

Search station

OK

Service

NEXT

Settings

P

Tonering.volume
Tonering.pitch
Tonering.melody

- - - - - - - - - - -

Tone ringing

Tonering.volume

Tonering. pitch

Tonering.melody

Handset volume

Tone ringing

OK

Display contrast

NEXT

Tonering.volume

Tonering.pitch.
Tonering.melody

NEXT

OK

SAVE

NEXT

Tonering.volume

82

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Standard Settings

For your protection, you can enter a new four-digit PIN for each mobile unit. This protects your
settings such as ,for example mobile unit lock, and your stored personal data. The mobile unit
PIN setting at initialization is “0 0 0 0“.

The Comfort mobile unit is in idle
status.
Push this key; main menu appears..

Scroll with NEXT ...
until “Telephone lock” appears in the

1st line of the main menu...

then select “Telephone lock” with OK.
Enter 4-digit mobile unit PIN

After confirming with OK, the
following menu appears

Scroll with NEXT ...
until “Change PIN” appears in the

1st line of the menu and...
then select with OK .

Enter new PIN, please note this number!

Every digit entered replaces one dash

if necessary, correct with .
Complete entry.

Repeat new PIN.

Every digit entered replaces one dash..

Push this key to complete the entry.

Note:

● If you have entered an erroneous PIN, a negative acknowledgment tone is signalled.

● If you forget your PIN, it will be necessary to disassemble your device. Forgetting the PIN is

like losing a key. If this happens, please get in touch with the vendor of your telephone.

Enter / Change Mobile Unit PIN

a

ß

Telephone Book

Number redial

OK

Telephone lock

NEXT

Telephone lock

Tones

OK

Settings

NEXT

Telephone lock

Change PIN

Lock ON

Hotline no.

OK

Del.Hotline No.

NEXT

Enter

PIN:

* * _ _

Change PIN

- - - - - - - -

OK

Lock ON

NEXT

o

Enter

new PIN:

4 7 _ _

OK

o

Repeat

new PIN:

* * * *

SAVE

SAVE

83

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Standard Settings

In order to be able to use the call pickup, it must be activated (status at initialization). The activa­tion or deactivation of call pickup is valid for the entire system. Details on how to use call pickup
are found on page 87.

1. In idle status, push the ßkey and select “Service” from the main menu.

2. In the service menu, select “System settings” and enter the system code
(see also page 115).

After the correct system code is entered,
the following display appears:

Scroll with NEXT...
until “Equipment data” appears in the 1st

line
and then select with OK.

Scroll with NEXT...
until “Call pickup” appears in the 1st line

and
then select with OK.

Push OK if you only want to view

or

use OFF to deactivate call pickup.

Activate / Deactivate Call Pickup

Sys cd/Mn sys cd

OK

Duration/Units

NEXT

Call barring

Equipment data

Call pickup

OKOKOKOK

OKOK

Autom. seizure

OK

Call pickup

NEXT

Access rights

Call pickup

activated

OK

OFF

OFF

84

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Standard Settings

Push the gkey to be able immediately seize an external line (status at initialization). If this
function is deactivated, you must first dial a zero to place an external call.

This setting can be adjusted for every internal station.

1. In idle status, push the ßkey and select Service” from the main menu.

2. In the service menu, select “System settings” and enter the system code.
(see also page 115).

After the correct system code is entered,
the following display appears:

Scroll with NEXT...
until “Equipment data” appears on the 1st

line and
then select with OK.
Select “Autom. seizure” with OK.

A list of the internal numbers appears.
Push OK if you only want to view

or
Activate / Deactivate “Automatic seizure“ for Internal Station

Stipulate by deleting or entering the desired
internal numbers; here,
1 to 4; if necessary, correct with .

Complete with SAVE.

Activate / Deactivate Automatic Line Seizure

Sys cd/Mn sys cd

OK

Duration/Units

NEXT

Call barring

Equipment data

Autom. seizure

Autom.seizure

OK

Call p ickup

NEXT

COS

Automatic
seizure forInt.:

OK

1 2 _

1

...

8

Automatic

seizure for Int.:

1 2 3 4

SAVE

SAVE

85

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Standard Settings

The mobile unit is in idle status.
Push the F-key; main menu appears.
Scroll through main menu with NEXT ...
until “Settings” appears on the 1st line and

then select with OK.
The menu for the mobile unit settings

appears (entire menu at left).
Using NEXT / OK, you can select and edit

the following options:

Handset volume Set the handset volume

(3 levels possible).

Tone ringing Set the tone ringing volume,

(7 levels possible)

You can hear the level during the setting procedure.
The pitch (10 levels) and melody (10 levels) of the tone ring can
be set in the same manner.

Display contrast Set display contrast

(6 levels possible).

Register See „Registering the Comfort Mobile Unit at a Base Station“ on page

24

Language Set the language;

5 different languages can be set:

German, English, French, Italian, Spanish.

Auto.backlight Activate / deactivate automatic display- back-

light

Initial. status Set the initialization status of mobile unit;

this setting is protected by the mobile unit
PIN. PIN setting and telephone book entries are retained!

Mobile Unit Settings

a

ß

Telephone book

Number redial

OK

Telephone lock

NEXT

Handset volume
Tone ringing
Display contrast
Register
Language
Auto. backlight
Multicell config
Initialisation

- - - - - - - -

Settings

Handset volume

Tone ringing

OK

Display contrast

NEXT

Handset volume

OKNEXT

Tonering. volume

OKNEXT

Display contrast

OK

NEXT

Active: German

New: English

OK

New: French

NEXT

Auto. backlight

activated

OFF

OK

86

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Incoming Calls

An incoming call (external, internal) is signalled acoustically via the tone ring and visually on the
screen of the mobile unit.

Display Before Call Pickup

Incoming external call:
(here, on line 1)
Push this to switch off tone ring.
You can still accept the call, as long as it
remains visible on the screen.

Incoming internal call:
(here, mobile unit 2) Display blinks.

Accept the Call
either

by “picking up” the mobile unit from the
charging unit,

or

by pushing the connect key if the mobile
unit is not in the charging unit.

Display After Call Pickup

external call
(here, line 1)

internal call (here, mobile unit 2)

To Terminate the Call

Either

push the connect key

or

return the mobile unit to the charging unit.

Display After End of Call

Accept / Terminate Call

RING OFF

Call from Ext 1

RING OFF

Call from Int 2

RING OFF

c

g

External 1

CONSLT.

MUTE

Internal
call with 2

MUTE

CONSLT.

g

a

TEL.BOOK

Station 1

REDIAL

87

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Incoming Calls

You can pick up an external call within your call group even if the call is not signalled on your
mobile unit (for example, in the case of call forwarding, page 105).

In order to do this, call pickup must be activated (see page 83).

Push the connect key

Push this key,
to pick up the external call.

or
if “Automatic line seizure“ (see page 84) is activated:

Push the-0 key, to seize another telephone
line..

Push this key,
to accept the external call.

Call Pickup

g

Pickup

Call on Ext 1

EXT 2

PICKUP

Ext 1

CONSLT.

MUTE

@

External 2

REDIAL

Please dial

TEL.BOOK

External 2

PICKUP

Call on Ext. 1

MUTE

PICKUP

External 1

CONF.

TOGGLE

Ext. 2 waiting

88

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Incoming Calls

The call waiting tone signals that an external call is waiting while you are engaged in another call.
If you answer the external call while you are engaged in an internal call, the internal call is termi­nated.

You are engaged in an internal call and hear
the call waiting tone.

Push this button to accept the external call
immediately

or

Push the connect key to terminate the on­going call.

You will hear the external call and can
accept it .

The call waiting tone signals that a call is waiting while you are engaged in another call. The call
waiting feature can be activated and deactivated.

You are engaged in an external call and hear
the call waiting tone.

Push this to pick up the external call imme-­diately (the current call is then placed on
hold).

You can now toggle between the calls

Push this button.

or set up a 3-way conference

Push this button

or return to the original call

Push.

The second call is terminated thereby.

Answer Call Waiting During an Internal Call

Answer a Call Waiting During an External Call

b

Internal

Call from Ext. 1

PICKUP

MUTE

PICKUP

g

Call from Ext. 1

RING OFF

b

External

MUTE

PICKUP

External call

PICKUP

External 1
Ext. 2 waiting

TOGGLE

CONF

TOGGLE

External 2

Ext.1 waiting

TOGGLE

CONF

CONF

Conference

CONF. END

External

CONSLT.

00:11:01

89

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Outgoing Calls

After putting the base station and Comfort mobile unit into service, you can generally place calls
with a mobile unit which is switched ON.

The Comfort mobile unit is in
idle status.

Push connect key.
You will hear the dial tone.

Automatic Line Seizure Activated (Initialization Status)

External telephone line is automatically
seized.

No Automatic Line Seizure Activated

Internal dial tone can be heard
Push EXT1/ EXT2 or 1/2 key

to seize specific line
or
Push this key

first available line is seized

then

Push the digit keys to dial external number.

It is displayed in enlarged form, here

12345678..

You hear the ring tone.
The subscriber answers.
You carry on the external call...

External Dialing with Dialpad

a

Station 1

TEL.BOOK

REDIAL

g

External 1

Please dial

TEL.BOOK

REDIAL

Please seize

EXT1

EXT2

line

EXT1

EXT2

External 1

Please dial

TEL.BOOK

REDIAL

=

o

External 1

12345678

PAUSE

External 1

00:01:01

CONSLT.

MUTE

b

Continued

90

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Outgoing Calls

To Terminate the Call:

Push the connect key or return the mobile
unit to the charging unit.

The length of time which elapsed during the
call appears on the display.

After 4 seconds, the screen
again shows the following.

Telephone Line is Busy:

If the telephone line is already being used
by another Gigaset station, you will hear a
busy tone and see the display:

or, for example.

Mobile Unit not Fully Trunk Authorized:

If, for example, your mobile unit is not set
for “full trunk authorization,” then you
cannot make external calls.

(See „Set the COS for Internal Stations“ on
page 113.)

00:03:21

g

Station 1

TEL.BOOK

REDIAL

External line

busy

External 1

busy

No

access rights

91

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Outgoing Calls

En-bloc dialing allows you to view the external telephone number which you have entered before
the number is dialed and to correct it, if necessary.

The Comfort mobile unit is in idle status
.

Automatic Line Seizure Activated

Enter the external telephone number.

It is displayed in an enlarged form; here,

1234567.

if necessary, correct with .

Push connect key within 30 seconds.

You will then hear the dial tone, and the
number can be dialed.

The subscriber answers.
You carry on the external call...

No Automatic Line Seizure is Activated

Enter the telephone number:
First enter the line code 0, 1 or 2
here, the 0; now enter the tel. number

Push the connect key
You will then hear the dial tone, and the
telephone number is dialed

To Terminate the Call:

Push the connect key, or return the mobile
unit to the charging unit.

You will see the length of time which
elapsed during the call.

Note:

● En-bloc dialing can contain a maximum of 22 characters.

External En-Bloc Dialing with Dialpad

a

TEL.BOOK

Station 1

REDIAL

o

1234567_

PAUSE

g

Extern 1

PAUSE

12345678

MUTE

External 1

CONSLT.

00:01:02

b

01234567

PAUSE

o

g

01234567_

PAUSE

Extern 1

g

00:03:21

92

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Outgoing Calls

Number redial allows you to automatically redial the last external number dialed from the mobile
unit.

The Comfort mobile unit is in idle status
.

Push this key to activate
number redial.

The telephone number is shown on the dis­play; here, 12345678.

Push this key to start dialing

The subscriber answers.
You carry on the external call.

To Terminate the Call:

Push the connect key, or return the mobile
unit to the charging unit.

or a On the display, you will see the time

elapsed during the call.

Note:

● The number redial memory can contain a maximum of 22 characters.

● Every new telephone number entered overwrites the previous one.

● After pushing DIAL, you can manually add suffix numbers. The suffix digits are not stored in

the number redial memory.

● The number redial memory is erased if the device is switched off or the battery removed.

Number redial allows you to automatically dial the most recently dialed external number.

The Comfort mobile unit is in
idle status.

Push this key to activate the number
redial feature.

The phone number is shown on the screen;
here, 12345678.

Push this key to start dialing

The phone number is dialed.

The subscriber answers.
You carry on the external call.

Number Redial

Number Redial as En-Bloc Dialing

a

TEL.BOOK

Station 1

REDIAL

REDIAL

DIAL

12345678

DIAL

Extern 1

12345678

PAUSE

00:03:21

b

g

a

TEL.BOOK

Station 1

REDIAL

REDIAL

DIAL

12345678

DIAL Extern 1

12345678

Pause

93

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Outgoing Calls

The Comfort mobile unit is in
idle state.

Push internal key.
Your station number is displayed;

here, 1.

Enter the desired internal station number,
i.e. push one of the digit keys between 0
and 9; here, the 2.

The internal station number which was
dialed is displayed; here, for example, 2.

or
Collective call:

Push the dialog key.

or

Push the star key
You will hear the internal ring tone.

All registered internal stations, mobile units
or auxiliary devices are displayed
and rung.

The other party answers, having already
seen on the screen which station is
calling.
You carry on the internal call.

To Terminate the Call:

Push the connect key, or return the mobile
unit to the charging unit.

After 4 seconds, the screen returns to the
idle status display.

Note:

● Stations 0 to 9 are available on your Gigaset 1054.

● To view the internal station number, push the internal key. Terminate by returning the mobile

unit to the charging unit, or by pushing the connect key.

Internal Dialing to Another Mobile Unit or Auxiliary Device

a

TEL.BOOK

Station 1

REDIAL

ü

Internal

Your own no.: 1

Coll.call

@...9

Internal 1

Calls Internal 2

Coll.call

Internal call to

2 3 4

*

Internal

MUTE

CONSLT.

call with 2

b

g

TEL.BOOK

Station 1

REDIAL

94

Gigaset 1054, GBR: A30852-X954-B101-1-761928.10.96

1054K07A.FM

Operation with Comfort Mobile Unit Outgoing Calls

You can enter up to 100 names and accompanying telephone numbers in the telephone book
(depending on the length of the number or the name). Saving and administering the entries is
described on page 99.

The stored names can be found either via scrolling or by entering the letters of the name, using
the alphanumeric keyboard on your Comfort mobile unit.

The Comfort mobile unit is in
idle state.

Push this key to access the telephone book.

Find the name by scrolling

or
Entering Letters:

By entering the letters, for example
The letter B: Push the 2 twice, or
The letter C: Push the 2 three times quickly,
or
The letter D: Push the 3 once.

Push this key to dial the number
of the station selected.

You hear the ring tone.
The station answers..
You carry on the external call...

To Terminate the Call:

Push the connect key, or return the mobile
unit to the charging unit.

On the screen, you will briefly see the time
elapsed during the call.

Note:

● If the name search does not find any such entries, an error tone is signalled.

Dialing from the Telephone Book

a

Station1

TEL.BOOK

REDIAL

TEL.BOOK

NEXT

ANTON

BERTA
C‡SAR

DIALNEXT

BERTA

C‡SAR
DANIEL

DIAL

NEXT

22

BERTA

C‡SAR
DANIEL

DIAL

NEXT

DIAL

External 1

12345678

PAUSE

b

External 1

00:00:21

CONSLT.

MUTE

g

00:03:21