GigaLane GIGASEM Users manual

Product

GIGASEM

GIGASEM

1. Application

This product is a communication equipment based on Bluetooth

and transmit a position-based source code.

- Retail (ex. shopping mall, convenience store, etc)

- Exhibition hall (ex. Museum, Gallery)

- Amusement part, Baseball par

2. Introduction

3. Performance

- Protocol : Bluetooth 4.0 LE

- Frequency : 2.40 ~ 2.48 Ghz (ISM Band)

- Size : 45Φ X 15mm

- Weight : 17.9g (with battery)

- Battery :

a. Output Voltage : 3.0V

b. Capacity : 630mAh

c. Tape : Coin cell, lithium

1 Front Case

2
3

4

12345

5

PCB

Battery

Rear Case

Adhesive tape

01

- Life Time : 1.6 ~ 1.9 years

- Operation Temperature : 0℃ ~ 60℃

If you will use at low temperature, the battery lift could be shortened

- RF Output range : 0 ~ -30dBm

Product

GIGASEM

GIGASEM

4. Method

1) Power ON

2) Power OFF

- Remove the case

- Turn on the slide switch

- Assembly the case

a. Click the switch through the hall at the front case with using the pin

If it click one more, turn on the device

b. After remove the case, turn off the device using slide switch

02

3) Replace the battery

a. Remove the case

b. Remove the used battery

c. Insert the new battery. Refer to the below figure

d. Assembly the case