GIGAIPC mITX-1605A, MRZNVMI User Manual
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
mITX-1605A (MRZNVMI)
Thin Mini-ITX Motherboard
User’s Manual 1st Ed
1
www.gigaipc.com
Copyright Notice
This document is copyrighted, 2018. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translat¬ed, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in
this manual is intended to be accurate and reliable. However, the
original manufacturer assumes no respon¬sibility for its use, or for any
in¬fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and
is subject to change without notice. While reasonable efforts have
been made in the preparation of this document to assure its accuracy,
GIGAIPC assumes no liabilities resulting from errors or omissions in this
document, or from the use of the information contained herein.
GIGAIPC reserves the right to make changes in the product design
without notice to its users.
www.gigaipc.com
2
Acknowledgement
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
All other products’ name or trademarks are properties of their
respective owners.
AMD® is trademark of Advanced Micro Devices.
•
Microsoft Windows is a registered trademark of Microsoft Corp.
•
Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel
•
Corporation
Core, Atom are trademarks of Intel Corporation
•
ITE is a trademark of Integrated Technology Express, Inc.
•
IBM, PC/AT, PS/2, and VGA are trademarks of International Business
•
Machines Corporation.
All other product names or trademarks are properties of their
respective owners.
Packing List
Before setting up your product, please make sure the following items
have been shipped:
mI TX-1605A MB 1
SATA power cable 1
I/O Bracket 1
mITX-V1000 Fan Sink 1
If any of these items are missing or damaged, please contact your
distributor or sales representative immediately.
3
www.gigaipc.com
Item Quantity
Assembly Sequence
Material fan-sink.
Torque 2.2 ~ 2.8 kgf-cm
Fix the heat sink with your hand to correct the
1>.
corresponding hole position, and fix the heat sink as shown
in the figure above.
2>.
3>.
According to the above assembly sequence, the correct
torque is used to lock the heat sink.
When removing, please reverse (spinning from position 4)
to remove
Assembly action
www.gigaipc.com
4
About this Document
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
This User’s Manual contains all the essential information, such as
detailed descriptions and explanations on the product’s hardware
and software features (if any), its specifications, dimensions, jumper/
connector settings/definitions, and driver installation instructions (if
any), to facilitate users in setting up their product.
Users may refer to the GIGAIPC.com for the latest version of this
document.
5
www.gigaipc.com
Safety Precautions
Please read the following safety instructions carefully. It is advised that
you keep this manual for future references
All cautions and warnings on the device should be noted.
1.
Make sure the power source matches the power rating of the
2.
device.
Position the power cord so that people cannot step on it. Do
3.
not place anything over the power cord.
Always completely disconnect the power before working on the
4.
system’s hardware.
No connections should be made when the system is powered
5.
as a sudden rush of power may damage sensitive electronic
components.
If the device is not to be used for a long time, disconnect it from
6.
the power supply to avoid damage by transient over-voltage.
Always disconnect this device from any AC supply before
7.
cleaning.
While cleaning, use a damp cloth instead of liquid or spray
8.
detergents.
Make sure the device is installed near a power outlet and is
9.
easily accessible.
Keep this device away from humidity.
10.
Place the device on a solid surface during installation to prevent
11.
falls
Do not cover the openings on the device to ensure optimal heat
12.
dissipation.
www.gigaipc.com
6
Watch out for high temperatures when the system is running.
13.
Do not touch the heat sink or heat spreader when the system is
14.
running
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
Never pour any liquid into the openings. This could cause fire or
15.
electric shock.
As most electronic components are sensitive to static electrical
16.
charge, be sure to ground yourself to prevent static charge
when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any staticshielded containers.
If any of the following situations arises, please the contact our
17.
service personnel:
Damaged power cord or plug
i.
Liquid intrusion to the device
ii.
Exposure to moisture
iii.
Device is not working as expected or in a manner as described
iv.
in this manual
The device is dropped or damaged
v.
Any obvious signs of damage displayed on the device
vi.
18.
7
www.gigaipc.com
DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED
ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S
PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO
PREVENT DAMAGE.
FCC Statement
This device complies with Part 15 FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions and your local government’s
recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant
et les directives gouvernementales de recyclage.
www.gigaipc.com
8
China RoHS Requirements (CN)
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
产品中有毒有害物质或元素名称及含量
GIGAIPC Main Board/ Daughter Board/ Backplane
部件名称
印刷电路板
及其电
子组件
外部信号
连接器
及线材
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此 产 品 所 标 示 之 环 保 使 用 期 限，系 指 在 一 般 正 常 使 用 状 况下。
有毒有害物质或元素
铅
(Pb)汞(Hg)镉(Cd)
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
9
www.gigaipc.com
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
GIGAIPC Main Board/ Daughter Board/ Backplane
Poisonous or Hazardous Substances or Elements
Component
PCB & Other
Components
Wires &
Connectors
for External
Connections
O：The quantity of poisonous or hazardous substances or elements found in each
of the component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least
one of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this
product is applicable under normal usage only
Lead
Mercury
(Pb)
(Hg)
O O O O O ○
O O O O O O
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
www.gigaipc.com
10
Table Contents
Thin Mini-ITX Motherboard 1
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
User’s Manual 1st Ed 1
Copyright Notice .......................................................................... 2
Acknowledgement ....................................................................... 3
Packing List ...................................................................................3
Assembly Sequence ..................................................................... 4
About this Document ................................................................... 5
Safety Precautions ....................................................................... 6
FCC Statement .............................................................................. 8
China RoHS Requirements (CN) ....................................................9
China RoHS Requirement (EN) ................................................... 10
Chapter 1 - Product Specifications 13
1.1 Specifications ...............................................................15
Chapter 2 – Hardware Information 17
11
www.gigaipc.com
2.1 Jumpers and Connectors ............................................. 18
2.2.1 AUDIO (Audio line-out port) ......................................... 21
2.2.2 USB3_LAN2, USB3_LAN1 (USB 3.0 ports + Gbe LAN
port) .............................................................................. 21
2.2.3 DP3_4, DP1_2 (Display ports) ....................................... 22
2.2.4 COM1_2 (Serial ports) .................................................. 22
2.2.5 DC_IN (DC In JACK Connector) .....................................23
2.2.6 DC_IN2 (ATX 2x2 pin power connector) ....................... 24
2.2.7 SYS_FAN (System Fan Connector) ................................25
2.2.8 SATA1 (SATA 6GB/S C onnec tor) .................................... 26
2.2.9 SATAPW1 (SATA 6GB/S Power Connector).................... 27
2.2.10 F_USB2_3, F_USB2_1, F_USB2_2 (USB 2.0 header) ..... 28
2.2.11 COM3, COM4 (Serial Port header) ................................ 29
2.2.12 AT_CN (AT/ATX power mode select jumper) ................ 30
2.2.13 GPIO_CNT (General purpose input/output connector) 31
2.2.14 SYS_PANEL (Front Panel Header) ................................ 32
2.2.15 TPM_LPC (Trusted Platform Module Connector) ......... 33
2.2.16 SODIMM1, SODIMM2 (DDR4 SO-DIMM slot#1/slot#2)
...................................................................................... 34
2.2.17 CLR_CMOS (Clear CMOS jumper) ................................. 35
2.2.18 CPU_FAN (CPU fan connector) ..................................... 36
2.2.19 M2M (M.2 M-key) ....................................................... 37
2.2.20 PCIEX16 (PCIE x16 slot) ............................................... 38
2.2.21 SPK_OUT (Speaker out Connector) ............................. 39
2.2.22 F_Audio (Front audio header) ....................................... 40
2.2.23 BAT (Battery Cable connector) .....................................41
2.2.24 LVDS_DP (LVDS/DP jumper) .......................................... 42
2.2.25 LSW (LVDS resolution jumper) ...................................... 43
2.2.26 M2E (M.2 E-key) ............................................................ 44
2.2.27 MPCIE (Mini PCI-E) ........................................................ 45
2.2.28 BKL_CN (Back light brightness control connector) ....... 46
2.2.29 LVDS (LVDS connector) .................................................. 47
2.2.30 JCOM1, JCOM2 (COM1 & COM2 RI# pin RI#/5V/12V
Select) ......................................................................... 48
www.gigaipc.com
12
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
Chapter 1
Chapter 1 - Product Specifications
13
www.gigaipc.com
www.gigaipc.com
14
1.1 Specifications
Mini-ITX Motherboard mITX-1605A (MRZNVMI)
Motherboard mITX-H110A
Form Factor
CPU
Socket 1 x FP5 BGA
Chipset
Memory
Ethernet 2 x GbE LAN ports (Realtek® RTL8111HS)
Video
Audio Realtek ALC269 controller
Storage 1 x SATA 6Gb/s port
Expansion Slots
Mini-ITX
170W x 170D (mm)
AMD® RYZEN™ V1605B Embedded Processor
up to 3.6GHz
TDP 25W
2MB of shared L2 plus 4MB of shared L3 total
—
2 x DDR4 1.2V SO-DIMM sockets supporting up to 32 GB of
system memory
Up to 2400Mhz
Max. memory capacity 32GB
Integrated Graphics Processor - AMD Radeon™ Vega 8 Graphics
4 x DP port, supporting a maximum resolution of 4096x2160 @
60Hz
1 x LVDS port, supporting a maximum resolution of 1080P (
switch from DP)
High Definition Audio
1 x PCIe x16 (X8 bus) slot
1 x Mini PCIe (Full Size PCIe & USB)
1 x M.2 slot:
- M-key
- SATA 6Gb/s
- Supports NGFF-2280 cards
1 x M.2 slot:
- E-key
- Supports NGFF-2230 Combo cards
15
www.gigaipc.com
Loading...