Gigafast EZ800-S User Manual
EZ-800S
Mini 8 Port Switch
User Manual
Copyright
The contents of this publication may not be reproduced in any part or as a whole,
stored, transcribed in an information retrieval system, translated into any
language, or transmitted in any form or by any means, mechanical, magnetic,
electronic, optical, photocopying, manual, or otherwise, without the prior written
permission.
Trademarks
All products, company, brand names are trademarks or registered trademarks of
their respective companies. They are used for identification purpose only.
Specifications are subject to be changed without prior notice.
Copyright© 2004, GigaFast Inc., All Right Reserved
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against radio interference in a commercial
environment. This equipment can generate, use and radiate radio frequency
energy and, if not installed and used in accordance with the instructions in this
manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause interference, in which case
the user, at his own expense, will be required to take whatever measures are
necessary to correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022/A1 Class B, and EN 50082-1. This meets the essential
protection requirements of the European Council Directive 89/336/EEC on the
approximation of the laws of the member states relation to electromagnetic
compatibility.
Table of Content:
Chapter 1
Introduction
Features
Package Content
Wire Diagram
Chapter 2
Quick Install
Chapter 3
Frequently Asked Questions (FAQ)
Appendix A
Spec. Sheet
Chapter 1
Introduction:
Congratulations on the purchase of this EZ-800 Switch. The EZ-800s is
affordable and small yet great for business and home uses. Plug & Play is
important these days. People are often confused about setting up their home or
business network so they rather have a unit that sets everything up for them.
Just plug the Ethernet cables from a source into the ports on the EZ-800s will
automatically obtain the IP address for you. There is no need to install any
software or no setup required. Every LAN port on the EZ-800s has an ‘AutoUplink’ ability which means you can connect your existing router into any of the
five ports on the EZ-800s and it will connect and establish the connection
automatically. As simple as 1-2-3, the EZ-800s is the best solution whether if
you want to setup a LAN party or expand your existing home/business network
so you can have more computers linked together. Please read farther down for
more information on this great unit and thank you for choosing GigaFast.
Features:
•
Eight auto-sensing 10/100 Mbps Ethernet ports, using Category 5 (Cat5)
unshielded twisted pair (UTP) cable
• IEEE 802.3x Standard Compliant
• tion to build the packet forwarding
Automatic address learning func
information table
• ration, plug and play
Auto-sensing full-duplex or half-duplex mode of ope
installation with no software configuration required
Loading...