Gigafast EE102-DLX User Manual

EE-102DLX User Manual

(32-bit PCIMCIA 10/100 Mbps Fast Ethernet Adapter)

Copyright

The contents of this publication may not be reproduced in any part or as a whole,
stored, transcribed in an information retrieval system, translated into any
language, or transmitted in any form or by any means, mechanical, magnetic,
electronic, optical, photocopying, manual, or otherwise, without the prior written
permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of
their respective companies. They are used for identification purpose only.
Specifications are subject to be changed without prior notice.

Copyright© 2004, GigaFast Inc., All Right Reserved

2

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against radio interference in a commercial
environment. This equipment can generate, use and radiate radio frequency
energy and, if not installed and used in accordance with the instructions in this
manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause interference, in which case
the user, at his own expense, will be required to take whatever measures are
necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022/A1 Class B, and EN 50082-1. This meets the essential
protection requirements of the European Council Directive 89/336/EEC on the
approximation of the laws of the member states relation to electromagnetic
compatibility.

3

Table of Contents:

Chapter 1...........................................................................................5

Introduction................................................................................................. 5

Features........................................................................................................5

Package Content........................................................................................ 5

Requirements..............................................................................................6

Wire Diagram............................................................................................... 6

Chapter 2...........................................................................................8

Installing Network Drivers....................................................................... 8

Standard Windows 95 (Version 4.00.950 and 4.00.950a)................. 9

Standard Windows 95 Version 4.00.950b (OSR2) ........................... 10

Windows NT Version 4.0........................................................................ 10

Windows 98 ............................................................................................... 11

Windows 2000........................................................................................... 11

Windows Millennium Edition................................................................12

NetWare ODI Client.................................................................................. 12

Microsoft Network Client for DOS....................................................... 14

Chapter 3.........................................................................................15

Troubleshooting / Frequently Asked Questions ............................. 15

Appendix A: Cabling and Pin Assignment........................................ 17

Appendix B: Glossary.......................................................................19

Appendix C: Technical Specifications .............................................. 21

Appendix D: Warranty Info. .............................................................. 22

Appendix E: Contact Information......................................................22

4

Chapter 1

Introduction:

Congratulations on the purchase of this 32 bit PCIMCIA 10/100 Mbps Ethernet
adapter. High speed broadband internet is commonly used these days. It’s
almost a must have product in homes and offices. No matter if you have a high
speed broadband internet connection or a simple peer-to-peer connectivity; this
product will help you through these simple tasks. Installation only takes few
minutes! EE-100dlx is also compatible with most of the popular operating
systems. Read on this manual for further information on this 32 bit PCIMCIA
10/100 Mbps Ethernet adapter.

Features:

• Compliant with IEEE802.3u 10Base-T/100Base-TX

• address Plug-and-Play installation automatically sets up IRQ and I/O

• Fully compliant with 32-bit PCIMCIA Local Bus specification

• Full duplex design to double the performance to 20Mbps/200Mbps

• Supports Auto-Negotiation function

• Built-in FIFO buffers to eliminate external memory

• One STP connector for 100Mbps or 10Mbps network speed

•

Supports early interrupt on transmit to increase performance

• Driver supports Microsoft Windows 3.1/3.11/95/98/ME/2000/XP, M

Windows NT 3.51/NT4.0/NDIS, Microsoft LAN manager, LANtas
LAN server, ODI Netware 2.x/3.x/4.x/5.x, SCO UNIX, Linux

• Provides diagnostic software and lights to indicate network status

Pac a

k ge Content:

• (1) PCIMCIA 10/100based Ethernet Adapter

• (1) Driver/Floppy OR Driver/Compact Disc With User manual included

icrosoft

tic, IBM

5

Requirements:

• A running operating system

• A laptop (or reader) that has an open 32bit PCIMCIA slot available

A Pentium 1• similar or higher processor/IBM compatible personal

computers

ire Diagram:

W

thernet Adapter to Network:

E

The ‘Ethernet Adapter to Network’ simply shows how a user can use the EE­100dlx to connect to his/her modem/router/switch. One Ethernet cable goes from

e laptop (connected with the EE-100axp) and out to your modem/router/switch.

th

thernet Adapter to another Ethernet Adapter (Peer to Peer):

E

The bottom diagram shows how the connection works when a user wishes to do
a peer to peer connection in the network. Simply have both sides connected wi
an CAT5 crossover cable and setup both computers with IP addresses in
TCP/IP properties For more information

onnection please read our FAQ guide.

c

on how to setup a Peer to Peer

your

th

6

7