GIGA BYTE TECHNOLOGY MSN09C01 Users Manual

Macaron N Series

SM-MSN09-C01

NFC Controller Module with Integrated Antenna

Datasheet Version 1.0

Smart Approach Co., Ltd. 4F,No.669,Sec.4.Chung Hsing Rd., Chutung, Hsinchu 310, Taiwan, R.O.C. +886-3-5830303 www.smart-approach.com.tw

SM-MSN09-C01 Datasheet

- 2 -

Revision 1.0 June 2014

Smart Approach Co., Ltd (“S.A.”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under license under the patent right of any manufacturer.

Smart Approach Co., Ltd is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders.

Feedback on the use of any of the document is welcomed and encouraged by Smart Approach.

 Please contact service@smart-approach.com.tw for your feedback or any ordering inquiry.  Please contact support@smart-approach.com.tw for any technical question.

SM-MSN09-C01 Datasheet

- 3 -

Revision 1.0 June 2014

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.  Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

 This device may not cause harmful interference.  This device must accept any interference received, including interference that may cause

undesired operation.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

 This device may not cause interference, and

 This device must accept any interference, including interference that may cause

undesired operation of the device.

Cet appareil est conforme aux norms CNR exemptes de licence d’Industrie Canada. Le

fonctionnement est soumis aux deux conditions suivantes:

 cet appareil ne doit pas provoquer d’interférences et

 cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer

un fonctionnement non souhaité de l’appareil.

SM-MSN09-C01 Datasheet

- 4 -

Revision 1.0 June 2014

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加

大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；

經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信

法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電

機設備之干擾。

Information for the OEMs and Integrators

The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user.

1) This device is intended for OEM integrators only.

2) Please see the full Grant of Equipment document for other restrictions.

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: JCK-MSN09C01 ” and "Contains IC: 6655A-MSN09C01“

SM-MSN09-C01 Datasheet

- 5 -

Revision 1.0 June 2014

Revision History

This section describes the changes that were implemented in this document. The changes are listed by revision, starting with the most current publication.

Revision 1.0

Revision 1.0 of this datasheet was published in June 2014. This was the first publication of the document.

SM-MSN09-C01 Datasheet

- 6 -

Revision 1.0 June 2014

Contents

REVISION HISTORY ............................................................................................................................. - 5 -

CONTENTS ........................................................................................................................................... - 6 -

FIGURE CONTENTS ............................................................................................................................ - 7 -

TABLE CONTENTS .............................................................................................................................. - 7 -

1 INTRODUCTION .......................................................................................................................... - 8 -

2 PRODUCT OVERVIEW ................................................................................................................ - 9 -

2.1 FEATURES .............................................................................................................................. - 9 -

2.2 APPLICATION .......................................................................................................................... - 9 -

3 FUNCTIONAL DESCRIPTIONS ................................................................................................ - 11 -

3.1 COMMUNICATION OVERVIEW FOR ISO/IEC 14443A / MIFARE CONTROLLER .......................... - 12 -

4 ELECTRICAL SPECIFICATIONS .............................................................................................. - 13 -

4.1 PIN DESCRIPTION ................................................................................................................. - 13 -

4.2 I2C ADDRESS ....................................................................................................................... - 14 -

4.3 TEMPERATURE MAXIMUM RATINGS ........................................................................................ - 14 -

4.4 DC ELECTRICAL PARAMETERS .............................................................................................. - 14 -

4.5 ANTENNA SPECIFICATIONS .................................................................................................... - 15 -

4.6 POWER CONSUMPTION ......................................................................................................... - 15 -

4.7 THERMAL PROTECTION ......................................................................................................... - 16 -

4.8 SYSTEM POWER MODES ........................................................................................................ - 16 -

4.9 RESET AND DOWNLOAD CONCEPT .......................................................................................... - 17 -

4.10 NFC CONNECTION RECOMMENDATION .................................................................................. - 18 -

4.11 MAIN BOARD DESIGN REFERENCE ........................................................................................ - 18 -

5 ORDERING INFORMATION ...................................................................................................... - 19 -

6 RELIABILITY VERIFICATION .................................................................................................... - 20 -

7 NFC MODULE OUTLINE ........................................................................................................... - 21 -

SM-MSN09-C01 Datasheet

- 7 -

Revision 1.0 June 2014

Figure Contents

Figure 1 Typical Application ................................................................................................. - 9 -

Figure 2 Typical Application II ............................................................................................ - 10 -

Figure 3 Module Block Diagram ................................................................ ........................ - 11 -

Figure 4 Transmission Modes ........................................................................................... - 12 -

Figure 5 Reset via VEN pin ................................................................................................. - 17 -

Figure 6 Connection Recommendation ............................................................................. - 18 -

Figure 7 Main Board Design W/O UICC Reference ........................................................... - 18 -

Figure 8 Antenna Module Drawing .................................................................................... - 21 -

Figure 9 Module FPC Connection Footprint (Button Contact) ............................................ - 22 -

Figure 10 FPC Wire Dimension ......................................................................................... - 22 -

Table Contents

Table 1 Module Pin Description ......................................................................................... - 13 -

Table 2 I2C Address ........................................................................................................... - 14 -

Table 3 Temperature Maximum Ratings ............................................................................ - 14 -

Table 4 DC Electrical Specification .................................................................................... - 14 -

Table 5 Antenna Specifications .......................................................................................... - 15 -

Table 6 Current Consumption ............................................................................................ - 15 -

Table 7 Thermal Protection ................................................................................................ - 16 -

Table 8 System Power Modes Description ........................................................................ - 16 -

Table 9 Power Mode Configuration .................................................................................... - 17 -

Table 10 Reset Timing ....................................................................................................... - 17 -

Table 11 Ordering Information Table .................................................................................. - 19 -

Table 12 Reliability Item Table ........................................................................................... - 20 -

+ 15 hidden pages