GIGA BYTE TECHNOLOGY 28T0HWS1001 User Manual

SkyVision WS100

User’s Manual

© 2012 GIGABYTE TECHNOLOGY CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. (“GBT”). No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the properties of their respective owners.

Notice

Please do not remove any labels on this product. Doing so may void the warranty of this

product. Due to rapid change in technology, some of the speci cations might be out of date

before publication of this manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does.The author make a commitment to update the information contained herein.

Rovi Product Notice:

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.

English

Supported Resolution

Please make sure the source device is compliant with the following standards. If the source device does not support the following frame rate, the OSD will show that no video displayed or the video quality is poor.

Video Forate Timing Resolution Supported

640x480p @ 59.94 / 60 Hz 720x480p @ 59.94 Hz 720x480p @ 60 Hz

720x576p @ 50 Hz 1280x720p @ 50 Hz

1280x720p @ 59.94 / 60 Hz 1920x1080i @ 50 Hz

1920x1080i @ 59.94 / 60 Hz 1920x1080p @ 50 Hz

1920x1080p @ 59.94 / 60 Hz 1920x1080p @ 29.97 / 30 Hz 640x480 @ 59.94 / 72.809 Hz

800x600 @ 60.317 / 72.188 Hz 1024x768 @ 60 / 70.069 Hz 1280x768 @ 60 Hz 1280x1024 @ 60 Hz 1366x768 1920x1080

480p

576p

720p

1080i

1080p / 60

1080p / 24 VGA SVGA XGA

WXGA SXGA

YES

YES YES

YES

YES YES

YES YES YES YES YES YES YES YES YES YES

-2-

English

SkyVision WS100 Specication

Featuring WHDI (Wireless Home Digital Interface) technology, GIGABYTE SkyVision WS100 can seamlessly transmit 1080p highdefinition videos or Blu-ray movies from any HDMI-ready device to HDTV or display. It can transmit uncompressed video contents up to 10 meters (Line of sight) with no latency (latency < 1ms).

SkyVision WS100

Wireless Technology

WHDI 1.0

Host Interface Video quality Video resolution

Audio

Operating frequency

Range

Latency Power supply

I/O port

Dimensions

HDMI (Type A) Uncompressed

HD: 480p,576p,720p,1080i, 1080p/60Hz PC: VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024) Panel: 1280x768, 1366x768, 1920x1080

Up to 18Mbps audio stream

5.1 channel, up to 48KHz 24 Bit, AC3 and DTS

USA/CANADA: 5170-5250 (MHz) 5735-5815 (MHz) EUROPE/ RUSSIA: 5170-5210 (MHz), 5210-5250 (MHz)

Up to 10 meters (Line of sight)* (transmission quality varies with the environment)

< 1ms

TX: 5V micro USB cable(female) RX: 5V, 2A micro USB power cable

TX: HDMI port*1, Micro USB*1 RX: HDMI port*1, DC-In*1

TX: 93x32x15.3 mm (LxWxH) RX: 93x82x32 mm (LxWxH)

-3-

English

Packing Content

Before setting up, please check whether the following items are in the package. If any item is missed or damaged, please contact your retailer.

-4-

English

Overview

1. Before You Begin

SkyVision WS100 transmitter

HDMI connector: Connects to the HDMI port of the source device

Micro USB power connector: Connects to the USB port of the source device with bundled USB cable.

Registration button: Registration button is reserved for receiver paring use.

LED indicator: On: LED indicator is solid blue Linking to SkyVision WS100 receiver: LED indicator is blinking

SkyVision WS100 receiver

HDMI port: Connects to HDMI-ready TV or display with bundled HDMI cable

1 2

Micro USB power port: Connects to external power with bundled power adapter Menu button: Setup menu

Up button: Scrolls up through the menu

Down button: Scrolls down through the menu

Power LED indicator: Power on: LED indicator is solid white Power off: LED indicator is off

Link LED indicator: Linked: LED indicator is solid blue Linking to SkyVision WS100 transmitter: LED indicator is blinking

-5-

English

Note:

1. When SkyVision WS100 is functioning normally, power LED indicator will be in solid white and link LED indicator will be in solid blue. Please refer to the following table for LED behavior.

Mode Status description Power LED Link LED

Standby

Initial boot up

Searching channels

Wireless linked

In power saving mode Solid white off

Boot up needs 15 to 20 seconds

Searching for available channels

No input from selected source

Video format not recognized

Video format is recognized

Solid white

Blinking blue

Solid blue

-6-

English

2. On Screen Display (OSD) Instruction:

The Menu button on SkyVision WS100 receiver allows you to add, remove, or rename SkyVision WS100 transmitter. You can also disconnect SkyVision here.

2.1 To add another SkyVision WS100 transmitter or remove existing SkyVision WS100 transmitter

1. Press Menu button

2. Press Up or Down button to select Settings

3. Press Up or Down button to select Add New Video Source or Remove Video Source

4. Press Menu button to select video source you want to add or remove

5. Select OK to apply the change

2.2 Disconnect SkyVision WS100

1. Press Menu button

2. Press Up or Down button to select Settings

3. Select Disconnect SkyVision

4. Select OK to apply the change

2.3 Rename SkyVision WS100

1. Press Menu button

2. Press Up or Down button to select Settings

3. Select Rename Video Source

4. Press Menu button to select the video source to be renamed

5. Use Up and Down buttons to move horizontally and highlight the character to be changed

6. Press Menu button to select the character to be renamed

7. Press Up or Down button to change the character

8. Press Menu button to conrm selected new character

9. Press and hold Menu button to Apply or Cancel Rename Video Source section

-7-

English

Installation

SkyVision WS100 can wirelessly transmit high-definition video/audio contents from devices such as PC, laptop, Blu-ray player, set-top box, PS3, and Xbox to TV or display*.

* Both source and display device must have HDMI ports

Step 1. Setup SkyVision WS100 Transmitter

Connect the bundled USB cable to SkyVision WS100 and then connect SkyVision WS100 and USB cable to the source device. Please plug SkyVision to source device’s HDMI port and plug USB cable to source device’s USB port. SkyVision WS100 transmitter’s power is supplied from the USB port of the source device.

Step 2. Setup SkyVision WS100 Receiver

Connect the bundled power adapter to SkyVision WS100 and insert the power adapter into a power outlet then connect SkyVision WS100 to the external display through bundled HDMI cable.

Note:

1. Please make sure your display is in “HDMI” input mode. When the components are connected correctly and the correct source is selected, the image on the source device will be showed on the display.

2. It may take a few seconds for SkyVision WS100 to link each other and for the image on the source device to the display. During the linking period, link LED indicators on the transmitter and receiver will blink in blue. When linking, link LED indicators will be solid blue.

-8-

English

Display Setting

SkyVision WS100 supports duplicate mode, extend mode, and projector only mode on external display. Please follow the steps below to enable external display.

1. Windows Utility

Step1. Press and tap P Step2. Select Clone mode, Extend display, or Project out only

2. MAC OS

Step1. Click System Performance to open Displays Step2. Click Detect Display to detect external display

Note: MAC OS will automatically detect external display and switch to a better resolution when external display cable is plugged in.

Adjust Screen Resolution

SkyVision WS100 supports 1080p full HD video resolution without latency (latency < 1ms). You can manually adjust preferred resolution by the following steps.

1. Windows Utility

Adjust screen resolutions on both source device and external display

Step1. Right click the mouse on Windows desktop and choose Screen resolution

Step2. Dropdown the Resolution list and select preferred resolution

Step3. Click Apply Step4. Click Keep Change when con rmation

message pop out Step5. Click OK

-9-

English

Adjust screen resolutions on source device or external display

Step1. Right click the mouse on Windows desktop and choose Screen resolution Step2. Dropdown the Resolution list and select preferred resolution for the

speci c display

Step3. Click Apply Step4. Click Keep Change when con rmation message pop out Step5. For generic PnP monitor and Intel Graphic Media accelerator HD screen, click monitor and select 60Hz as the screen refresh rate Step6. Click OK

Adjust Audio Setting

Step1. Please open Audio Setting form control panel Step2. Select HDMI output and click OK

-10-

English

Trouble Shooting

Issue Solution

Please make sure all cables are

•

connected properly.

Please make sure your display is in “HDMI”

•

No display output on the external display

No audio

Video output not entirely fit the external display screen

input mode.

Please check the distance between SkyVision

•

WS100 transmitter and receiver. Maximum transmit distance is 10 meters and may vary from the environment.

Unplug SkyVision WS100 transmission kit

•

and then re-plug.

• Please make sure your TV volume is properly

set and not in Mute mode.

• Please check if the audio connectors are

properly connected. *Please refer to Adjust Audio Setting section

for more details

• Please change either the source device’s

screen resolution or external display screen’s resolution.

-11-

English

Notice:

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved by

the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The availability of some specic channels and/or operational frequency

bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.

-12-

繁體中文

支援解析度

請確認視訊來源符合下列標準。若視訊來源無法支援下列畫面更新率，

SkyVision WS1000

訊息。

Video Forate Timing Resolution Supported

640x480p @ 59.94 / 60 Hz

在螢幕上將顯示視訊無法播放或視訊畫面品質不佳的

YES

720x480p @ 59.94 Hz 720x480p @ 60 Hz

720x576p @ 50 Hz 1280x720p @ 50 Hz

1280x720p @ 59.94 / 60 Hz 1920x1080i @ 50 Hz

1920x1080i @ 59.94 / 60 Hz 1920x1080p @ 50 Hz

1920x1080p @ 59.94 / 60 Hz 1920x1080p @ 29.97 / 30 Hz 640x480 @ 59.94 / 72.809 Hz

800x600 @ 60.317 / 72.188 Hz 1024x768 @ 60 / 70.069 Hz 1280x768 @ 60 Hz 1280x1024 @ 60 Hz 1366x768 1920x1080

480p

576p

720p

1080i

1080p / 60

1080p / 24 VGA SVGA XGA

WXGA SXGA

YES YES

YES

YES YES

YES YES YES YES YES YES YES YES YES YES

-1-

繁體中文

附件內容

請確認以下物件確實在何物件遺失或遭到破壞，請儘速聯絡您的經銷商。

GIGABYTE SkyVision WS100

包裝盒中。若有任

-2-

+ 32 hidden pages