GIGA BYTE TECHNOLOGY 28713FRCM9ICE User Manual

FORCE M9 ICE

Performance Wireless Laser Mouse

User’s Manual

All other brands and trademarks are the properties of their respective owners.

The product specifications are subject to change without notice.

Introduction

Congratulations on your purchase of the most innovative wireless laser mouse. With an incredible sensitivity to

surface details and high tracking speed than other mice, the wireless optical mouse can track reliably on tricky

wood-grain surfaces. It is much more advanced than you imagine and will make you more productive and

comfortable.

Features

 Auto link, plug-and-play! No need to set the channel ID
 2.4GHz, 800/ 1200/ 1600/ 2000 DPI adjustable
 Nano receiver
 Laser tracking engine with high tracking speed and sensitivity
 Power on/off , DPI, and GIGABYTE Free-Scrolling Technology™ switch
 2*AA batteries included, can be activated with only one battery

Hardware Installation

1. Insert batteries
a. Remove the battery compartment cover in the case
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet
c. Close the battery compartment cover properly
d. Make sure the Power on-off switch on the mouse in ON
e. The LED on the bar will blink 3 seconds if the mouse power is on

Warning: A wrong battery placement may cause batteries overheat

△△△△ Note

The unit offers a strong power saving management. Once the mouse accesses sleeping mode, to clip any key on

the mouse is compulsory to wake it up.

Power on/off: There is a power on/off switch designed to save the batteries power while non-usage of a longer

period.

Connect the Receiver

1. Turn on your PC

2. Connect the receiver to USB on PC