GIGA BYTE TECHNOLOGY 28713ECO600, 28713C55RX User Manual

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.

This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.

ECO600 Long-lasting Wireless Laser Mouse
Model nr: 28713ECO600
FCC ID: JCK28713ECO600

GIGABYTE Nano recevier

Model nr: 28713C55RX
FCC ID: JCK28713C55RX

Wireless

LASER MOUSE

User's Guide

Introduction

Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.

Safety Notice

This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.

Dpi light indicator

800 dpi 1200 dpi 1600 dpi

A. Hardware Installation

1. Insert the batteries

Please DO NOT direct the
laser beam at anyone's eyes.

Features

2.4GHz (distance 6~8m), 16 Channels/216 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Ergonomic design.
800/1200/1600 dpi switchable.
Rubber side grips.
2*AA Alkaline batteries included.

Mouse

Wheel button

Dpi (+)button

(-)

button

Dpi
Battery cover

ID reset button
Power on/off switch

Receiver

Internet Forward & Backward button

Receiver

a. Remove the battery compartment cover on the top case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off switch on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will be on for 6 seconds if the mouse power is on.

2 * AA batteries

Battery compartment cover

+

-

A wrong battery placement
may cause batteries overheat.

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.

Power on/off:

There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
successfully switched.