GIGA BYTE TECHNOLOGY 28713ECO500 User Manual

Wireless

LASER MOUSE

User's Guide

Introduction

A. Hardware Installation

Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.

Safety Notice

This product complies with IEC 60825-1, Class I laser product.

The product complies with FCC and CE rules.

Please DO NOT direct the
laser beam at anyone's eyes.

Features

2.4GHz (distance 6~8m), 16 Channels/224 ID

Using state-of-art technology. High tracking speed and sensitivity.

Nano receiver.

Longer battery life.

Auto-Link, Plug and Play! No need to set the channel ID.

Power on/off switch.

Ergonomic design.

800/1600 dpi switchable button.

Rubber side grips.

2*AA Alkaline batteries included.

Mouse

Internet Forward & Backward button

1. Insert the batteries

a. Remove the battery compartment cover on the top case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off switch on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will be on for 6 seconds if the mouse power is on.

2 * AA batteries

+

-

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.

Power on/off:

There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
successfully switched.

2. Connect the receiver

a. Turn on your PC.
b. Connect the receivere to USB port on PC.

Battery compartment cover

A wrong battery placement
may cause batteries overheat.

Pull out
the receiver

Wheel button

Dpi button

Low power indicator

Power on/off switch

Battery cover

Receiver

ID reset button

Receiver

PC

USB port