Gigabyte GZ-XX1CA-SNS, Triton GZ-XX1CA-SNS/SNB, Triton 180 GZ-AX1CA-SDS/SDB, Triton 180 GZ-AX1CA-SD1/SD2 User Manual
Triton Series
English User’s Manual
Triton + Triton 180
Triton GZ-XX1CA-SNS/SNB
Triton 180 GZ-AX1CA-SDS/SDB GZ-AX1CA-SD1/SD2
English
2
Thank you for purchasing GIGABY TE thermal product. GIGABYTE
is dedicated to the integration of casing liquid /air- cooling solution
technology, to provide users with the most optimal solution for heat
dissipation. For further information and specifications of the “Triton”
series, please visit GIGABYTE website. (http://www.gigabyte.com.tw)
The Following are not covered by the warranty:
1. Using the product incorrectly or in a manner other than the designed purpose.
2. Nonobservance of the proper operations provided.
3. Malfunction due to interference from other devices.
4. Unapproved modification of the product.
5. Consequential damage to other objects due to the product’s fault.
6. Malfunction arising from natural hazards E.g. earthquake, lighting, fire and floods.
7. The product’s warranty label has been removed or damaged.
8. The devices inside, including power supply, hard disk, CD-ROM drive, motherboard,
ventilator, etc, are not detached from the casing prior to transportation of the computer
system, resulting in damage to the casing or other computer-related devices.
9. Any loss/damage caused by failure to follow the installation process with in the user
manual.
Triton 180
Triton
Failure to wear gloves during installation of computer products
may cause bodily harm or damage to your devices. Incorrect
connector installation may possibly burn out the motherboard
and other components. Be sure to observe the instructions in
the user manual.
English
3
Table of Contents
1. Components Introduction
4
1-1 Casing’s Internal Structure
4
1-2 Front and Rear Panel Structure
5
1-3 Removal of Side and Front Panels
6
2. Features
6
3. Specifications
7
4. Installation Instructions
8
4-1 Installation of Power Supply
8
4-2 Installation of Motherboard
8
4-3 Installation of Add-on Card
9
4-4 Installation of Front Multi-Media I/O Port
10
4-5 Installation of Fan Power Cable
11
4-6 Installation of 5.25” Front Device Bay
12
4-7 Installation of 3.5” Front Device Bay
12
4-8 Installation of 3.5” Internal Device Bay
13
4-9 Foot Supports
13
4-10 Liquid Cooling System Support
13
4-11 Recommended Cooling Products
14
English
4
1.Components Introduction
1-1 Casing’s Internal Structure
1
2
3
4
5
6
7
8
Power Supply
1
Motherboard
Tray
2
PCI Tool-Free
Fastener
3
5.25” Front
Device Bay
4
3.5” Front
Device Bay
5
3.5” Internal
Device Bay
6
English
5
1-2 Front and Rear Panel Structure
a) Front Panel b) Rear Panel
Accessory Box
7
Securing Runner
x 6
Copper Stand Off
x 9
Motherboard
Securing Screw x 9
Power Supply
Securing Screw x 4
Wire Clamp x 1 Magnet Ring x 1
Front Cable Kit
8
USB 2.0 Audio Set
(HD & AC’97)
IEEE1394
(Multi-connectors)
3-Pin Fan
Connector
Basic chassis power
switch control cable kit
Triton 180 Triton
a-1) Reset SW / HDD LED / Power SW / Power LED
a-2)Front multi-media I/O ports
(USB x2, IEEE 1394 x1, Audio Set x1 (HD &AC’97))
b-1) Rear Fan
b-2) LCS Tube Inlet/Outlet
b-1
b-2
a-1
a-2
Loading...