Congratulations on your purchase of the GIGABYTE Notebook.
This manual will help you to get started with setting up your notebook. The final product
conguration depends on the model at the point of your purchase. GIGABYTE reser ves the
right to amend without prior notice. For more detailed information, please visit our website at
www.gigabyte.com
Using GIGABYTE Notebook for the First Time
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the DC-in jack on the right side of the notebook.
3 Connect the power cord to the power outlet.
1
English
Switching on the Power
After you turn on the Notebook for the very rst time, do not turn it off until the operating system
has been congured. Please note that the volume for the audio will not function until Windows
Setup has completed.
Booting Up the Notebook for the First Time
Depending on your conguration, the Microsoft® Windows® Boot Screen will be the rst screen that
you will see as the notebook starts up. Follow the on-screen prompts and instructions and enter
your personal information to complete the setup of the Windows® Operating System.
®
2
Your GIGABYTE Notebook Tour
Top View & Front View
English
1
2
6
1 Light sensor
2 Webcam
3
3 Microphone
4 Power Button
5 TouchPad
6 LED Indicators
Battery Indicator Button
7
8 Swappable Storage Bay
Bluetooth Status LED
4
5
7
Wireless Lan Status LED
HDD Status LED
Battery Status LED
Power Status LED
Press the right button of touchpad to
check the remaining battery power.
Right click to show the remaining power
percentage. As shown below, the
battery life indicator is available when
the laptop is shut down, in stand-by or
hibernation.(Battery mode)
1
Left View
21 3
4 5
8
2
<10%
11-30%
31-50%
51-70%
71-90%
>90%
1 Kensington Lock Slot
2 Ethernet Port
3 USB 2.0 Port
6
4 SD Card Reader
5 Headphone Jack
6 Microphone Jack
Right View
2 3
1 4 5 6
3
English
1 Mini Display Port
2 USB 3.0 Port
3 USB 3.0 Port (USB Charge)
4 HDMI Port
5 External Display (VGA) Port
6 DC-in Jack
Base View
1 Memory Compartment
1
2
Warning:
DO NOT remove the built-in lithium battery. For any service needs, please contact your local GIGABYTE
Authorized Service Center.
2 Speakers
4
Hotkeys
The computer employs hotkeys or key combinations to access most of the computer’s controls like
screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before
pressing the other key in the hotkey combination.
English
Hotkey
Fn+ESC Eject ODD Eject ODD
Function Description
Fn+F1
Fn+F2
Fn+F3
Fn+F4
Fn+F5
Fn+F6
Fn+F7
Fn+F8
Fn+F9
Fn+F10
Fn+F11
Fn+F12
Fn+Space
Sleep Put the computer in Sleep mode.
Wireless LAN Enables/disable the Wireless LAN function.
Brightness Down Decrease the screen brightness.
Brightness Up Increase the screen brightness.
Switche display output between the display
Display Toggle
Touchpad Toggle Turn the internal touchpad on and off.
Speaker Toggle Turn the speaker on and off.
Volume Down Decrease the sound volume.
Volume Up Increase the sound volume.
Screen Display Toggle Turn the screen display on and off.
Bluetooth Enable/disable the Bluetooth function.
Webcam Turn the internal webcam on and off.
Keyboard Backlight
Toggle
screen, external monitor (if connected) and
both.
Turn the keyboard backlight on and off.
Macro key
Macro keys can be set via Macro Hub, setting combination keys for complicated and/or general
operation.
Macro key Macro key Description
G
G1 User Programmable Macro key
G2 User Programmable Macro key
G3 User Programmable Macro key
G4 User Programmable Macro key
G5 User Programmable Macro key
Macro group switch, press around 3 secconds as hardware
switch on/off.
Swappable bay Application
1 Unlock swappable bay locker.
2 Draw the swappable bay out.
5
English
9.5mm/7mm HDD/SSD only
Connect the HDD or SSD pin by sliding it into the connecter.