GIGABYTE M7600 Owner's Manual

All specifications and figures are subject to change without notice.
All trademarks and logos are the properties of their respective holders.

Introduction

Congratulations on your purchase of the most innovative wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.

Features

2.4GHz (distance 6~8m), 16 Channels/4096 ID

Using state-of-art technology. High tracking speed and sensitivity.

Nano receiver.

Longer battery life.

Auto-Link, Plug and Play! No need to set the channel ID.

Power on/off switch.

Ergonomic design.

800/1600 dpi switchable button.

Rubber side grips and finger grooves.

2*AAA Alkaline batteries included.

Mouse

Wheel button

Dpi button

Low power indicator

Battery cover

Receiver release
button

Receiver

ID reset button
Power on/off switch

Receiver

2 * AAA batteries

Battery compartment cover

+

-

A wrong battery placement
may cause batteries overheat.

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.

Power on/off:

There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
sucessfully swithced.

2. Connect the receiver

a. Turn on your PC.
b. Connect the receivere to USB port on PC

Press the receiver
release button

A. Hardware Installation

1. Insert the batteries

a. Remove the battery compartment cover on the bottom case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will blink 3 seconds if the mouse power is on.

PC

USB port

3. Communication : The mouse & the receiver

The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.