Gigabyte M34WQ User guide

M34WQ

LCD Monitor User's Manual

Copyright

© 2021 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their

respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the
property of

GIGABYTE.
Changes to the specications and features in this manual may be made

by
GIGABYTE without prior notice.
No part of this manual may be reproduced, copied, translated,

transmitted, or published in any form or by any means without
GIGABYTE’s prior written permission.

•

In order to assist in the use of this monitor, carefully read the User
Guide.

•

For more information, check on our website at:

https://www.gigabyte.com

The terms HDMI and HDMI High-Denition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States
and other countries.

- 2 -

LCD Monitor User's Manual

Safety Precautions

Read through the following Safety Precautions before using the monitor.

•

Only use the accessories that are provided with the monitor or that
which are recommended by the manufacturer.

•

Keep the plastic packaging bag for the product in a place that
cannot be reached by children.

•

Before connecting the monitor to the power outlet, make sure that
the voltage rating of the power cable is compatible with the power
specication in the country where you are located.

•

The power cord plug must be connected to a properly wired and
grounded power outlet.

•

Do not touch the plug with wet hands, otherwise easily cause
electric shock.

•

Place the monitor in a stable and well-ventilated place.

•

Do not place the monitor near any heat sources such as electric
radiators or direct sunlight.

•

The holes or openings on the monitor are for ventilation. Do not
cover or block the ventilation holes with any objects.

•

Do not use the monitor near water, drinks, or all types of liquids.
Failure to do so may result in electric shock or damage to the
monitor.

•

Make sure to unplug the monitor from the power outlet before
cleaning.

•

As the screen surface is easy to be scratched, avoid touching the
surface with any hard or sharp object.

•

Use a soft lint-free cloth instead of a tissue to wipe the screen. You
may use a glass cleaner to clean the monitor if required. However,
never spray the cleaner directly onto the screen.

•

Disconnect the power cable if the monitor is not being used for a
long period of time.

•

Do not attempt to disassemble or repair the monitor yourself.

- 3 -

LCD Monitor User's Manual

Stability Hazard Precautions

The product may fall, causing serious personal injury or death. To prevent
injury, this product must be securely attached to the oor/wall in accor­dance with the installation instructions.

Many injuries, particularly to children, can be avoided by taking simple
precautions such as:

•

ALWAYS use stands or installation methods recommended by the
manufacturer of the product set.

•

ALWAYS use furniture that can safely support the product.

•

ALWAYS ensure the product is not overhanging the edge of the
supporting furniture.

•

ALWAYS educate children about the dangers of climbing on
furniture to reach the product or its controls.

•

ALWAYS route cords and cables connected to your product so
they cannot be tripped over, pulled or grabbed.

•

NEVER place a product in an unstable location.

•

NEVER place the product on tall furniture (for example,
cupboards or bookcases) without

•

anchoring both the furniture and the product to a suitable
support.

•

NEVER place the product on cloth or other materials that may be
located between the product and supporting furniture.

•

NEVER place items that might tempt children to climb, such as
toys and remote controls, on the top of the product or furniture
on which the product is placed.

•

If the existing product is going to be retained and relocated, the
same considerations as above should be applied.

•

To prevent personal injury or damage to the product caused
by tipping over due to earthquakes or other shocks, make sure
to install the product in a stable location and take measures to
prevent falling.

- 4 -

LCD Monitor User's Manual

Contents

INTRODUCTION ........................................................................... 7

Unpacking ...................................................................................................7

Package Contents ....................................................................................9

Product Overview ....................................................................................10

GETTING STARTED ......................................................................12

Installing the Stand Base .......................................................................12

Lift the monitor .........................................................................................13

Adjusting the Viewing Angle ...............................................................14

Making Connections ............................................................................... 18

USING THE DEVICE ...................................................................... 19

Turning the Power On/O .....................................................................19

User Comfort Recommendations .......................................................20

Selecting the Input Source ...................................................................21

OPERATIONS ................................................................................22

Quick Menu ................................................................................. 22

Function Key Guide .................................................................................24

Congure the Device Settings .............................................................29

APPENDICES ................................................................................ 42

Specications .............................................................................................42

Supported Timing List ............................................................................ 43

Troubleshooting .......................................................................................44

Basic Care ....................................................................................................45

Notes on USB Charging ..........................................................................45

- 5 -

LCD Monitor User's Manual

GIGABYTE Service Information ............................................................45

SAFETY INFORMATION ............................................................... 46

Regulatory Notices ..................................................................................46

- 6 -

LCD Monitor User's Manual

INTRODUCTION

Unpacking

1. Open the upper cover of the packaging box. Then observe the

unpacking instruction attached on the inner cover. Making

sure the box is in the correct orientation, carefully lay the box
on the stable surfacepen.

2. Open the inner cover. Grab the EPS foam assembly (through the

openings) to pull it out of the box.

- 7 -

LCD Monitor User's Manual

3. Remove the items from the upper EPS foam.

4. Remove the upper EPS foam. Then you can remove the stand from

the lower EPS foam.

- 8 -

LCD Monitor User's Manual

Package Contents

The following items come with your packaging box. If any of them is
missing, please contact your local dealer.

Monitor Monitor Base Power Cable

USB CableStand DP Cable

Warranty Card

HDMI Cable

Multilingual
Installation
Guide

Quick Start Guide Warranty Card

Note: Please keep the packaging box and packing materials for fu­ture transportation and/or installation of the monitor. 4 screws (MAC.
Screw-MI M4.0 x 14.0L) are provided for wall mount installation (refer
to page 16).

- 9 -

Product Overview

Front View

LCD Monitor User's Manual

1

1 Control button

- 10 -

LCD Monitor User's Manual

Rear View

AC

5

8

7

64321

1 AC IN jack
2 HDMI ports (x2)
3 DisplayPort
4 Type-C port

5 USB upstream port
6 USB 3.0 ports
7 USB 3.0 ports
8 Headphone jack

- 11 -

LCD Monitor User's Manual

1

3

2

or or

GETTING STARTED

Installing the Stand Base

1.

Align the Stand base with the stand o underneath the stand. Then
attach the base onto the stand. Tighten the screw to secure the
monitor base in place.

Note: You can either use a coin or a small athead screwdriver to tighten the
screw.

- 12 -

LCD Monitor User's Manual

Lift the monitor

Take the monitor out of the box by holding the stand arm. Carefully
lift the monitor, turn it over and place it upright on its stand on a
at even surface.Remove the foam wrap from the monitor.

Note: Consider keeping the box and packaging in storage for use in the future
when you may need to transport the monitor. The tted foam packing is ideal

for protecting the monitor during transport.

- 13 -

LCD Monitor User's Manual

Adjusting the Viewing Angle

Note: Hold the monitor base so that the screen does not topple when you
make the adjustment.

Adjusting the Tilt Angle

Tilt the screen forward or backward to the desired viewing angle
(-5˚ to 21˚).

21

- 14 -

LCD Monitor User's Manual

Changing the Screen Orientation

Raise the screen to the highest position (130mm).

Note: Before making the height adjustment, make sure you have removed
the safety plate from the stand.

- 15 -

LCD Monitor User's Manual

Installing a Wall-Mount Bracket (Optional)

Use only a 100 x 100 mm VESA compatible wall mount kit.

1.

Place the monitor on a at surface, with the screen facing down.

Note: We recommend that you cover the table surface with soft cloth to pre­vent damage to the monitor.

2.

Push the locking clips inward to detach the stand from the monitor.

3.

Remove the stand.

- 16 -

LCD Monitor User's Manual

4.

Attach the mounting bracket to the mounting holes at the rear of
the monitor. Then use the screws provided with this monitor to
secure the bracket in place.

100 mm

100 mm

Note: To mount the monitor on the wall, refer to the installation guide that is
included in the wall-mount bracket kit. VESA Mounting Screw M4 x 8mm mini­mum.

- 17 -

Making Connections

AC

1

1

LCD Monitor User's Manual

6

7

3

4

2

5

8

1 Power cable
2 HDMI cable
3 DisplayPort cable
4 Type-C cable

5 USB (A-Male to B-Male) cable
6 USB cable
7 USB cable
8 Headphone cable

- 18 -

LCD Monitor User's Manual

USING THE DEVICE

Turning the Power On/O

Make sure the power switch next to the AC power input jack is switched
to ON.

Power On

1. Connect one end of the power cable to the AC IN jack at the rear of

the monitor.

2. Connect other end of the the power cable to a power outlet.

3. Press the Control button to turn on the monitor. The Power LED will

light in white, indicating the monitor is ready to use.

Power O

Press the Control button for 2 seconds to turn o the monitor.

Note: When the Main menu appears on the screen, you can also turn o the
monitor by moving the Control button down ( ). Refer to page 24 .

- 19 -

LCD Monitor User's Manual

User Comfort Recommendations

The following are some tips for comfortable viewing of your monitor:

•

Optimal viewing distances for monitors range from approximately
510 mm to 760 mm (20” to 30”).

•

A general guideline is to position the monitor such that the top
of the screen is at or slightly below your eye-height when you are
comfortably seated.

•

Use adequate lighting for the type of work you are performing.

•

Take regular and frequent breaks (at least for 10 minutes) every half­hour.

•

Be sure to periodically look away from your monitor screen and focus
on a far object for at least 20 seconds during the breaks.

•

Eye exercise can help reduce eye strain. Repeat these exercises
frequently: (1) look up and down (2) slowly roll your eye (3) move
your eyes diagonally.

- 20 -

LCD Monitor User's Manual

Selecting the Input Source

1. Move the Control button

right ( ) to enter the Input
menu.

2. Move the Control button center

( ) to select the desired input
source. Then press the Control
button to conrm.

Input

HDMI 1

HDMI 2

DisplayPort

Type-C

Select Exit

- 21 -

LCD Monitor User's Manual

Adjust Exit

Black Equalizer

10

OPERATIONS

Quick Menu

Hot Key

By default, the Control button has been assigned with the specic
function.

Note: To change the preset hot key function, refer to the “Quick Switch” section
on page 37 .

To access the hot key function, do the following:

•

Move the Control button up ( ) to enter the Black Equalizer menu.

Move the Control button
up/down ( ) to adjust the
setting and press the Con-

trol button to conrm.

•

Move the Control button down ( ) to enter the Picture Mode menu.

- 22 -

LCD Monitor User's Manual

Select Exit

Picture Mode

Standard

FPS

RTS/RPG

Movie

Reader

sRGB

Adjust Exit

Volume

50

Move the Control button
center ( ) to select the de­sired option and press the

Control button to conrm.

•

Move the Control button left ( ) to enter the Volume menu.

Move the Control button
up/down ( ) to adjust the
headphone volume level
and press the Control but­ton to conrm.

•

Move the Control button right ( ) to enter the the Input menu.
Refer to the “Selecting the Input Source” section.

Note: To close the menu, move the Control button left

- 23 -

( )

.

Function Key Guide

Select Exit

KVM

KVM Switch

KVM Wizard

KVM ON

KVM Reset

•

Press the Control button to display the Main menu.

LCD Monitor User's Manual

Settings

Game Assist

GAME ASSISTMULTI TASK

KVM

(Multi Task)

SETTING

EXIT

Exit

POWER OFF

Then use the Control button to select the desired function and
congure the related settings.

KVM

When the Main menu appears on the screen, move the Control button
left ( ) to enter the KVM menu.

•

KVM Switch: Switch the input source that has been assigned
to USB-B or Type-C connection in the KVM Wizard settings.
When there are several input signals connected to the device,
a message box will appear on the screen once the system
detected USB Type-C input signal.

- 24 -

LCD Monitor User's Manual

KVM

Press to switch device.

Select USB-B Display

HDMI 1

HDMI2

DisplayPort

Type-C

Select Enter

Select TYPE-C Display

HDMI 1

HDMI2

DisplayPort

Type-C

Select Enter

USB-B Display Selection TYPE-C Display Selection

KVM Status

USB-B : Type-C

Type-C : N/A

To switch to USB Type-C input source, simply press the KVM button or
the Control button.
However, when there is no input signal from currently selected input
source, the system will return to the previous connected input source.

Note:

This option will be disabled if the KVM button function is dis-

abled (KVM OFF).

•

KVM Wizard: Congure the KVM related settings.
Set the input source to be bound with USB Type-B connection
rst, and then following with USB Type-C connection.

Note:

If you set the USB-B Display setting to Type-C, the TYPE-C Dis­play menu option will automatically be disabled. You will then see the
KVM status in the KVM Wizard page as below.

•

KVM ON/OFF: Enable/Disable the KVM button function.

- 25 -

LCD Monitor User's Manual

KVM

Press to switch device.

√ Select ON to enable the KVM button function. Once the

system detected USB Type-C input signal, a message box
will appear on the screen.

Press the KVM button or the Control button to switch to

USB Type-C input source.

Note:

When the KVM button function is enabled, the KVM

ON will be displayed on the left panel.

√ Select OFF to disable the KVM button function.

Note:

When the KVM button function is disabled, the KVM

OFF will be displayed on the left panel.

•

KVM Reset: Restore the KVM default settings.
√ HDMI 1 input source is bound with USB Type-B connection.
√ USB Type-C input source is bound with USB Type-C

connection.

√ The KVM ON/OFF function is set to ON.

Game Assist

•

When the Main menu appears on the screen, move the Control
button right ( ) to enter the Game Assist menu.

GAME INFO

Crosshair

Dashboard

Alignment

Display

Gaming Timer

Gaming Counter

Refresh Rate

Info Location

Select Exit

GameAssist

OFF

Count Up

Count Down

- 26 -

LCD Monitor User's Manual

•

Game INFO: Congure the FPS (First Person Shooting) game
related settings.

√ Select Gaming Timer to select countdown timer mode. To

disable this function, set the setting to OFF.

√ Select Gaming Counter or Refresh Rate to enable/disable the gam-

ing counter or real-time refresh rate setting.

√ Select Info Location to specify the location of the

information to be shown on the screen.

00:00

4

00

5

00

60

144

•

Crosshair: Select the desired crosshair type to suit your gaming
environment. It makes aiming much easier.

•

Dashboard: Congure the dashboard settings.

GameAssist

GAME INFO

Crosshair

Dashboard

Display

Alignment

ON

OFF

Dashboard Location

Select Exit

CPU Temperature

CPU Frequency

CPU Fan Speed

CPU Usage Rate

GPU Temperature

GPU Frequency

GPU Fan Speed

√ ON: Enable the function. Then select the desired option(s)

- 27 -

LCD Monitor User's Manual

to be shown on the screen.

√ OFF: Disable the function.
√ Dashboard Location: Specify the location of the

Dashboard information to be shown on the screen. Once
the Dashboard conguration is complete, it will transfer
the system data to the SOC through the USB port and
display the value of the selected function(s) on the screen.

CPU temperature
CPU frequency
CPU fan Speed
CPU usage Rate
GPU temperature
GPU frequency
GPU fan speed
GPU usage rate
AORUS Mouse DPI

Note: Make sure the USB cable is properly connected to the USB upstream
port of the monitor and the USB port of your computer.

•

Display Alignment: When the function is enabled, it displays the
alignment lines on the four sides of the screen, providing handy tool
for you to line up multiple monitors perfectly.

- 28 -

LCD Monitor User's Manual

Congure the Device Settings

When the Main menu appears on the screen, move the Control button
up ( ) to enter the Settings menu.

Note: Use the Control button to navigate through the menu and make adjust­ments.

Exit

Move/Adjust

Enter/Conrm

Button Guide

Gaming

Congure the game related settings.

Resolution Black Equalizer Aim Stabilizer Overdrive Refresh Rate

2560x1440 10 OFF Balance 60 HZ

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

Aim Stabilizer sync

Black Equalizer

Super Resolution

Display Mode

Overdrive

AMD FreeSync Premium

- 29 -

AMD FreeSync

Premium Pro

ON

Picture Mode Standard

Exit

Move/Adjust

Enter/Conrm

Item Description

LCD Monitor User's Manual

Aim Stabilizer
sync

Black

When this function is enabled, it reduces the motion
blur in a fast moving games.

Note: This function is not available under the following
conditions:

- when the frequency setting is lower than 100Hz.

- when the FreeSync function is activated.

Adjust the brightness of the black areas.

Equalizer
Super

Sharpen the low resolution images.

Resolution

Display Mode Select the aspect ratio of the screen.

•

Full: Scale the input image to ll the screen. Ideal
for 16:9 aspect images.

•

Aspect: Display the input image without
geometric distortion lling as much of the screen
as possible.

Note: This option is not compatible with FreeSync and PIP/
PBP functions.

Overdrive Improve the response time of the LCD monitor.
AMD FreeSync

Premium

When this function is enabled, it eliminates the screen
lag and tearing while playing games.

- 30 -

LCD Monitor User's Manual

Picture

Congure the image related settings.

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

Standard

FPS

RTS/RPG

Movie

Reader

sRGB

Custon 1

Brightness

Contrast

6 axis Color

Color Vibrance

Sharpness

Gamma

Color Temperature

85

Exit

Move/Adjust

Enter/Conrm

Select the one of the preset picture mode.

Item Description

Standard For editing documents or browsing websites.

FPS For playing FPS (First Person Shooting) games.

RTS/RPG For playing RTS (Real-Time Strategy) or RPG (Role-

Playing Game) games.

Movie For watching movies.

Reader For viewing documents.

sRGB For viewing photos and graphics on the computer

.

Custom 1 Customized picture mode settings.

Custom 2 Customized picture mode settings.

Custom 3 Customized picture mode settings.

Note: Picture mode “Standard”, Low blue light “Level 10” is the optimized setting
in compliance with TUV Low Blue Light Certication”.

- 31 -

LCD Monitor User's Manual

Then you can congure the following image settings.

Item Description

Brightness Adjust the brightness of the image.

Contrast Adjust the contrast of the image.

6 axis Color An advanced color adjustment that user can

individually customize hue and saturation for each axis
color.

Color Vibrance Adjust the intensity of the more muted colors.

Sharpness Adjust the sharpness of the image.

Gamma

Color
Temp.

Adjust the middle level of luminance.

Select the color temperature.

Note:

Select User Dene to customize the color
temperature by adjusting the red (R), green (G), or
blue (B) level according to your preference.

DCR Adjust the black level of the image to achieve the

optimum contrast.

Reset

Reset all Picture settings to the default settings.

Picture

- 32 -

LCD Monitor User's Manual

Note: The following picture modes will be shown only when HDR function is
activated.

HDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

HDR

Light Enhance

Color Enhance

Dark Enhance

Reset Picture

Exit

Move/Adjust

Enter/Conrm

Item Description

HDR Light Enhance: Enhance the Brightness performance.

Color Enhance: Enhance the Color performance.

Dark Enhance: Enhance the Darkness performance.

Reset Picture: Reset all Picture settings to the default
settings.

- 33 -

Display

Congure the display screen related settings.

LCD Monitor User's Manual

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

Input

RGB PC Range

Overscan

HDMI 1

HDMI 2

DisplayPort

Type-C

Exit

Move/Adjust

Enter/Conrm

Item Description

Input Select the input source.

RGB PC Range Select an appropriate RGB range setting or let the

monitor to detect it automatically.

OverScan When this function is enabled, it slightly enlarges

the input image to hide the outermost edges of the
image.

- 34 -

LCD Monitor User's Manual

PIP/PBP

Congure the multi-picture related settings.

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 Gamma 3 Normal

Picture Mode Standard

OFF

PIP

PBP

Exit

Move/Adjust

Enter/Conrm

Item Description

OFF Disable the PIP/PBP function.

PIP Split the screen into 2 parts (main window and inset

window).

• Source: Change the input source for the inset
window.

• PIP Size: Adjust the inset window size.

• Location: Move the inset window position.

• Display Switch: Swap the two windows.

• Audio Switch: Select which audio source you want to hear
the sound from.

PBP Display 1x1 split screen (left and right windows).

• Source: Change the input source for the right
window.

• PBP Mode: Select the aspect ratio of the windows.

• Display Switch: Swap the two windows.

• Audio Switch: Select which audio source you want to hear
the sound from.

- 35 -

System

Congure the system related settings.

LCD Monitor User's Manual

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

Audio

OSD Setting

Quick Switch

Other Settings

Volume

Mute

Exit

Move/Adjust

Enter/Conrm

Item Description

Audio Congure the headphone settings.

• Volume: Adjust the volume level.

• Mute: Enable/Disable the mute function.

OSD Settings Congure the on-screen display (OSD) menu related

settings.

• Display Time: Set the length of time the OSD
menu remains on the screen.

• OSD Transparency: Adjust the OSD menu
transparency.

• OSD Lock: When this function is enabled, no OSD
adjustment is allowed.

Note: To disable the OSD lock function, press the Control
key. When the message appears on the screen, select Yes
to conrm.

The button is locked,

conrm to unlock OSD.

No Yes

- 36 -

LCD Monitor User's Manual

Item Description

Quick Switch Assign the function of the hot keys.

Available options: Aim Stabilizer sync, Black Equalizer,
Low Blue Light, Volume, Input, Contrast, Brightness, and
Picture Mode.

The default setting of the hot keys as below:

Up

( )

: Black Equalizer
Down ( ): Picture Mode
Right

( )

: Input

Left

( ): Volume

- 37 -

LCD Monitor User's Manual

Other Settings • Resolution Notice: When this function is enabled,

the current resolution message will appear on the
screen when the monitor switches to another input
source.

• Input Auto Switch: When this function is enabled, it
automatically switches to an available input source.

• Auto Power O: When this function is enabled,
the monitor will automatically turn o after a
certain amount of time.

• LED Indicator:

By default, the LED indicator is set to Always
ON.

Always ON: The Power LED lights white
during operation and lights on and o in
standby mode(with 1 sec interval).

Always OFF: Turn o the Power LED.

Standby ON: The Power LED remains o
during operation and lights on and o in
standby mode(with 1 sec interval).

When the power supply is switched o, the
Power LED will remain o.

• Standby Charge: When this function is enabled,

increase Type-C charging wattage when the
screen is in standby mode.

• Type-C Compatibility: Compat with device

which does not support DSC when turn this
option into ON.

• USB Charge: Turn On or O. On: DC o/Saving

mode can to electrify for USB port. O: DC o/
Saving mode can't to electrify for USB port.

- 38 -

LCD Monitor User's Manual

Language

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

English

繁中

简中

Deutsch

Pусский

Français

日本語

Exit

Move/Adjust

Enter/Conrm

Item Description

Language Select an available language for the OSD menu.

- 39 -

Save Settings

Save all data.

LCD Monitor User's Manual

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

Setting1

Setting2

Setting3

Save

Load

Exit

Move/Adjust

Enter/Conrm

Item Description

Setting1 After selecting, the Save and Load menu will appear for

the player to choose.

Setting2 After selecting, the Save and Load menu will appear for

the player to choose.

Setting3 After selecting, the Save and Load menu will appear for

the player to choose.

- 40 -

LCD Monitor User's Manual

Reset All

Restore the monitor to its factory default settings.

SDR Brightness Contrast Sharpness Gamma Color Temperature

Gaming

Picture

Display

PIP/PBP

System

Language

Save Settings

Reset All

85 50 5 OFF Normal

Picture Mode Standard

Exit

Move/Adjust

Enter/Conrm

- 41 -

APPENDICES

Specications

Item Specications

Panel Size 34-inch
Aspect Ratio 21:9
Resolution 3440 x 1440
LED Life 30000 hours (min.)
Pixel Pitch 0.2325(W) x 0.2325(H)
Brightness 400 nits (typ.)
Contrast Ratio 1000:1 (typ.)
Color Depth 16.7M ( 8Bit)
Active Display area 799.8(H) x 334.8(V)
Viewing Angle 178°(H)/178°(V)

LCD Monitor User's Manual

Input/Output Terminals • 2x HDMI2.0

• 1x DP1.4

• 1x Headphone

• 1xUSB Type­C(5V/3A,9V/2A,
12V/1.5A,15V/1A)

Power Supply AC 100 ~ 240V at 50/60Hz
Power Consumptions • On: 127W (Max.)

• Standby: 0.5W

• O: 0.3W

Dimensions with Stand
(W x H x D)

Dimensions without
Stand (WxHxD)
Weight 10.22 kg (Net)

Temperature Range
(operation)

Note: Specications subject to change without notice.

817.7 x 548.8 x 244.3mm(highest)

817.7 x 430.5 x 244.3mm(lowest)

817.7X 368.7 X 67.5mm

0°C to 40°C

- 42 -

• 2x USB3.0
(downstream
5V/1.5A)

• 1x USB upstream

LCD Monitor User's Manual

Supported Timing List

Port Port Port

HDMI1 640x480@60Hz HDMI2 640x480@60Hz DP

640x480@75Hz 640x480@75Hz 640x480@75Hz

720x480@60Hz 720x480@60Hz 720x480@60Hz

800x600@60Hz 800x600@60Hz 800x600@60Hz

800x600@75Hz 800x600@75Hz 800x600@75Hz

1024x768@60Hz 1024x768@60Hz 1024x768@60Hz

1024x768@75Hz 1024x768@75Hz 1024x768@75Hz

1280x720@60Hz 1280x720@60Hz 1280x720@60Hz

1280x720@120Hz 1280x720@120Hz 1280x720@120Hz

1440x900@60Hz 1440x900@60Hz 1440x900@60Hz

1600x900@60Hz 1600x900@60Hz 1600x900@60Hz

1680x1050@60Hz 1680x1050@60Hz 1680x1050@60Hz

1720x1440@60Hz 1720x1440@60Hz 1720x1440@60Hz

1920x1080@24Hz 1920x1080@24Hz 1920x1080@60Hz

1920x1080@60Hz 1920x1080@60Hz 1920x1080@120Hz

1920x1080@120Hz 1920x1080@120Hz 2560x1080@120Hz

2560x1440@120Hz 2560x1440@60Hz 2560x1080@144Hz

3440x1440@50Hz 2560x1440@120Hz 2560x1440@60Hz

3440x1440@60Hz 3440x1440@60Hz 2560x1440@120Hz

3440x1440@100Hz 3440x1440@100Hz 2560x1440@144Hz

3840x2160@24Hz 3840x2160@24Hz 3440x1440@60Hz

3840x2160@60Hz 3840x2160@60Hz 3440x1440@100Hz

(Type-C)

640x480@60Hz

3440x1440@144Hz

- 43 -

LCD Monitor User's Manual

Troubleshooting

Problem Possible Solution(s)

No power • Make sure the power cable is properly

connected to the power source and the
monitor.

• Check the cable and plug to make sure they
are not broken.

• Make sure the monitor is turned on.

No image appears
on the screen

The image
does not ll the
entire screen

• Make sure the monitor and the computer
are properly connected and both devices are
turned on.

• Make sure you have selected the correct
input source. Refer to page 21 or page
34

.

•

Try dierent Display Mode (aspect ratio)
setting. Refer to page 30 .

The colors are
distorted

• Make sure the input signal cable is properly
connected.

• Congure the image related settings. Refer to
the “Picture” sec tion.

No sound or
volume is low

• Make sure the headphone cable is properly
connected.

• Adjust the volume level. Refer to page
23 or page 36 .

• Check the Audio Source setting.

• Adjust your computer sound related settings.

Note: If the problem persists, please contact our customer service for further
assistance.

- 44 -

LCD Monitor User's Manual

Basic Care

When the screen becomes dirty, do the following to clean the screen:

•

Wipe the screen with your soft, lint-free cloth to remove any residual
dust.

•

Spray or apply the cleaning uid onto a soft cloth. Then wipe the
screen gently with the damp cloth.

Note:

•

Make sure that the cloth is damp, but not wet.

•

When wiping, avoid applying excessive pressure on the screen.

•

Acidic or abrasive cleaners can damage the screen.

Notes on USB Charging

The following devices are not compatible with BC 1.2 of CDP mode.
When the Hub is connected to a PC, these devices cannot be charged
using the USB cable.

Vendor Device PID/VID

Apple IPad PID_129A/VID_05AC
Samsung Galaxy Tab2 10.1 PID_6860/VID_04E8
Samsung GALAXY TabPro PID_6860/VID_04E8

GIGABYTE Service Information

More service information, please visit GIGABYTE ocial website:
https://www.gigabyte.com/

- 45 -

LCD Monitor User's Manual

SAFETY INFORMATION

Regulatory Notices

United States of America, Federal Communications Commission
Statement

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Product Name: LCD monitor
Trade Name: GIGABYTE
Model Number: M34WQ

Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: [phone]
Internet contact information: https://www.gigabyte.com

FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B,

Unintentional Radiators. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•

Reorient or relocate the receiving antenna.

- 46 -

LCD Monitor User's Manual

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit dierent from that to
which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications. This class
B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.

European Union (EU) CE Declaration of Conformity

This device complies with the following directives: Electromagnetic
Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/
EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the
2015/863 Statement.

This product has been tested and found to comply with all essential
requirements of the Directives.

European Union (EU) RoHS (recast) Directive 2011/65/EU &
the European Commission Delegated Directive (EU) 2015/863
Statement

GIGABYTE products have not intended to add and safe from hazardous
substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP).
The parts and components have been carefully selected to meet RoHS
requirement. Moreover, we at GIGABYTE are continuing our eorts to
develop products that do not use internationally banned toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic
Equipment (WEEE) Directive Statement

GIGABYTE will fulll the national laws as interpreted from the 2012/19/
EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive.
The WEEE Directive species the treatment, collection, recycling and

- 47 -

LCD Monitor User's Manual

disposal of electric and electronic devices and their components. Under
the Directive, used equipment must be marked, collected separately, and
disposed of properly.

WEEE Symbol Statement

The symbol shown below is on the product or on its
packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should be
taken to the waste collection centers for activation of the
treatment, collection, recycling and disposal procedure.

.

For more information about where you can drop o your waste
equipment for recycling, please contact your local government oce,
your household waste disposal service or where you purchased the
product for details of environmentally safe recycling.

End of Life Directives-Recycling

The symbol shown below is on the product or on its
packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should
be taken to the waste collection centers for activation
of the treatment, collection, recycling and disposal
procedure.

Déclaration de Conformité aux Directives de l’Union
européenne (UE)

Cet appareil portant la marque CE est conforme aux directives de l’UE
suivantes: directive Compatibilité Electromagnétique 2014/30/UE,
directive Basse Tension 2014/35/UE, directive 2009/125/CE en matière
d’écoconception, la directive RoHS II 2011/65/UE & la déclaration
2015/863.

La conformité à ces directives est évaluée sur la base des normes
européennes

harmonisées applicables.

European Union (EU) CE-Konformitätserklärung

Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU­Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie
2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/
EU erfüllt und die 2015/863 Erklärung.

- 48 -

LCD Monitor User's Manual

Die Konformität mit diesen Richtlinien wird unter Verwendung der
entsprechenden Standards zurEuropäischen Normierung beurteilt.

CE declaração de conformidade

Este produto com a marcação CE estão em conformidade com das
seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM
2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP
2011/65/UE e a declaração 2015/863.

A conformidade com estas diretivas é verificada utilizando as normas
europeias harmonizadas.

CE Declaración de conformidad

Este producto que llevan la marca CE cumplen con las siguientes
Directivas de la Unión Europea: Directiva EMC 2014/30/EU, Directiva de
bajo voltaje 2014/35/EU, Directiva de Ecodiseño 2009/125/EC, Directiva
RoHS 2011/65/EU y la Declaración 2015/863.

El cumplimiento de estas directivas se evalúa mediante las normas
europeas armonizadas.

Deklaracja zgodności UE Unii Europejskiej

Urządzenie jest zgodne z następującymi dyrektywami: Dyrektywa
kompatybilności elektromagnetycznej 2014/30/UE, Dyrektywa
niskonapięciowej 2014/35/UE, Dyrektywa ErP 2009/125/WE, Dyrektywa
RoHS 2011/65/UE i dyrektywa2015/863.

Niniejsze urządzenie zostało poddane testom i stwierdzono jego
zgodność z wymaganiami dyrektywy.

ES Prohlášení o shodě

Toto zařízení splňuje požadavky Směrnice o Elektromagnetické
kompatibilitě 2014/30/EU, Směrnice o Nízkém napětí 2014/35/EU,
Směrnice ErP 2009/125/ES, Směrnice RoHS 2011/65/EU a 2015/863.

Tento produkt byl testován a bylo shledáno, že splňuje všechny základní
požadavky směrnic.

- 49 -

LCD Monitor User's Manual

EK megfelelőségi nyilatkozata

A termék megfelelnek az alábbi irányelvek és szabványok
követelményeinek, azok a kiállításidőpontjában érvényes, aktuális
változatában: EMC irányelv 2014/30/EU, Kisfeszültségű villamos
berendezésekre vonatkozó irányelv2014/35/EU, Környezetbarát
tervezésről szóló irányelv 2009/125/EK, RoHS irányelv 2011/65/EU és
2015/863.

Δήλωση συμμόρφωσης ΕΕ

Είναι σε συμμόρφωση με τις διατάξεις των παρακάτω Οδηγιών
της Ευρωπαϊκής Κοινότητας: Οδηγία 2014/30/ΕΕ σχετικά με την
ηλεκτρομαγνητική συμβατότητα, Οοδηγία χαμηλή τάση 2014/35/EU,
Οδηγία 2009/125/ΕΚ σχετικά με τον οικολογικό σχεδιασμό, Οδηγία RoHS
2011/65/ΕΕ και 2015/863.

Η συμμόρφωση με αυτές τις οδηγίες αξιολογείται χρησιμοποιώντας τα
ισχύοντα εναρμονισμένα ευρωπαϊκά πρότυπα.

Japan Class 01 Equipment Statement

安全にご使用いただくために

接地接続は必ず電源プラグを電源につなぐ前に行って下さい。
また、接地接続を外す場合は、必ず電源プラグを電源から切り離してから行って

下さい。

Japan VCCI Class B Statement

クラス

この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用すること
を目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用
されると、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。

B VCCI

基準について

VCCI-B

- 50 -

LCD Monitor User's Manual

10

China RoHS Compliance Statement

中国《废弃电器电子产品回收处理管理条例》提示性说明

为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终
止时，请遵守
国家废弃电器电子产品回收处理相关法律法规，将其交给当地具有
国家认可的回
收处理资质的厂商进行回收处理。

环保使用期限

Environment-friendly use period

此标识指期限（十年），电子电气产品中含有的有害
物质在正常使用的条件下不会发生外泄或突变，电子
电气产品用户使用该电子电气产品不会对环境造成严
重污染或对其人身、财产造成严重损害的期限。

产品中有害物质名称及含量 :

有害物质

部件名称

印刷电路板及
其电子组件
液晶面板 X ○ ○ ○ ○ ○
外壳 ○ ○ ○ ○ ○ ○
外部信号连接
头及线材
本表格依据 SJ/T 11364 的规定编制。
This table is prepared in compliance with the requirements of SJ/T 11364
○ : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的
限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572
规定的限量要求。

铅

(Pb)

X ○ ○ ○ ○ ○

X ○ ○ ○ ○ ○

汞

(Hg)

鎘（Cd)

六价铬

(Cr+6)

多溴联苯

(PBB)

多溴二苯

醚

(PBDE)

- 51 -

LCD Monitor User's Manual

限用物質含有情況標示聲明書

Declaration of the Presence Condition of the Restricted
Substances Marking

設備名稱：液晶顯示器 型號（型式）：M34WQ
Equipment name Type designation (Type)

限用物質及其化學符號

Restricted substances and its chemical symbols

單元

Unit

塑料外框 ○ ○ ○ ○ ○ ○
後殼 ○ ○ ○ ○ ○ ○

液晶面板 － ○ ○ ○ ○ ○
電路板組件 － ○ ○ ○ ○ ○
底座 ○ ○ ○ ○ ○ ○
電源線 － ○ ○ ○ ○ ○
其他線材 － ○ ○ ○ ○ ○
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比

含量基準值。
Note 1：〝Exceeding 0.1 wt %〞 and 〝exceeding 0.01 wt %〞 indicate that the percentage
content of the restricted substance exceeds the reference percentage value of presence
condition.
備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：〝○〞 indicates that the percentage content of the restricted substance does not
exceed the percentage of reference value of presence.
備考 3.〝－〞係指該項限用物質為排除項目。
Note 3：The 〝－〞 indicates that the restricted substance corresponds to the exemption

鉛

Lead

(Pb)

汞

Mercury

(Hg)

鎘

Cadmium

(Cd)

六價鉻

Hexavalent

chromium

(Cr+6)

多溴聯苯

Polybrominated

biphenyls

(PBB)

多溴二苯醚
Polybrominated
diphenyls ethers

(PBDE)

- 52 -