Gigabyte GV-RX60P128D User Manual

GV-RX60P128D(DE)

Radeon X600 Pro Graphics Accelerator

User's Manual

Rev. 103

12MD-RX60P128D-103

any from without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make

a commitment to update the information contained herein.

Table of Contents

English

1. Introduction ............................................................................................ 3

2. Hardware Installation ............................................................................. 4

3. Software Installation .............................................................................. 9

4. Troubleshooting Tips ........................................................................... 30

1.1. Features .................................................................................................3

1.2. Minimum System Requirement ................................................................3

2.1. Board Layout ..........................................................................................4

2.2. Hardware Installation ...............................................................................7

3.1. Win® XP Driver and Utilities Installation ....................................................9

3.1.1. Operating System Requirement ......................................................................... 9

3.1.2. DirectX Installation ............................................................................................. 10

3.1.3. Driver Installation ................................................................................................ 11

3.1.4. Utilities on Driver CD ......................................................................................... 13

3.1.5. Taskbar Icon ....................................................................................................... 15

3.1.6. Display Properties Pages ................................................................................. 19

3.2. Win® 2000 Driver Installation ..................................................................29

5. Appendix............................................................................................... 31

5.1. How to Reflash the BIOS ....................................................................... 31

5.1.1. Reflash BIOS in MS-DOS mode ................................................................................31

5.1.2. Reflash BIOS in Windows mode ............................................................................... 31

5.2. Resolutions and Color Depth Table (In Windows® XP)............................. 32

GV-RX60P128D(DE) Graphics Accelerator - 2 -

1. Introduction

1.1. Features

• Powered by ATI X600 Pro Visual Processing Unit (VPU)

• Supports the newest PCI Express x 16

• Integrated with 128MB DDR memory

• Supports DirectX 9.0

• Supports D-Sub, TV-Out and DVI connectors

1.2. Minimum System Requirement

• IBM® or 100% PC compatible with Pentium® III 650MHz or AMD Athlon 650MHz

class processor or higher

• One PCI Express x 16 slot

• Operating Systems Win® 2000 / Win® XP

• 64MB system memory

• 50MB of available disk space for full installation

• CD-ROM or DVD-ROM drive

English

Introduction- 3 -

2. Hardware Installation

English

2.1. Board Layout

1) GV-RX60P128D

Digital LCD Monitor

Analog LCD Monitor

DVI-I Connector

VGA Monitor C onnect or

TV-Out

(15p in)

DVI Output

VGA Output

DVI-I to D-Sub Connector

DVI-I Connector

AV Output

NTSC / PAL TV

Projector

Analog LCD Monitor

Analog Monitor

VGA Output

GV-RX60P128D(DE) Graphics Accelerator - 4 -

TV-out (S-Video)

VGA Monitor

Connector

(15pin)

2) GV-RX60P128DE

DVI-I Connector

VGA Monitor C onnect or

Digital LCD Monitor

English

TV-Out

(15p in)

DVI Output

DVI-I to D-Sub Connector

Analog LCD Monitor

NTSC / PAL TV

Projector

Analog LCD Monitor

Analog Monitor

VGA Output

AV Output

DVI-I Connector

TV-out (S-Video)

VGA Monitor

Connector

(15pin)

VGA Output

Hardware Installation- 5 -

English

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow

some precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not

have one, touch both of your hands to a safely grounded object or to a metal object,

such as the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by

static electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-

static mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

GV-RX60P128D(DE) Graphics Accelerator - 6 -

2.2. Hardware Installation

Installing Your Graphics card.

Now that you have prepared your computer, you are ready to install your graphics

accelerator card.

To install your graphics accelerator card:

1. Power off the computer and monitor, then

disconnect the display cable from the back

of your computer.

2. Remove the computer cover. If necessary,

consult your computer's manual for help

in removing the cover.

English

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to

disable it on the motherboard. For more

information, see you computer

documentation.

Hardware Installation- 7 -

4. Locate the PCI Express x 16 slot. If

English

5. Replace the screw to fasten the card in

6. Plug the display cable into your card; then

necessary, remove the metal cover from

this slot; then align your graphics card with

the PCI Express x 16 slot, and press it in

firmly until the card is fully seated.

place, and replace the computer cover.

turn on the computer and monitor. If your

graphics card came with a DVI connector,

you can connect a flat panel display to the

appropriate connector, as shown below...

To TV or VCR

To Flat Panel Display

To VGA Monitor

You are now ready to proceed with the installation of the graphics card drivers. Please

refer to next chapter for detailed instructions.

GV-RX60P128D(DE) Graphics Accelerator - 8 -

3. Software Installation

In this manual, we assume that your CD-ROM Drive letter to be Drive D:

The installation of Win® 2000 / Win® XP drivers is very simple. When you insert the driver

CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show up,

run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.

(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics

accelerator.)

3.1. Win® XP Driver and Utilities Installation

3.1.1. Operating System Requirement

• When loading the graphics card drivers for the system, please make sure your

system has installed DirectX 9 or later version.

• If you install the graphics card drivers for the motherboard, which consist of SIS, or

VIA chipsets, please install the appropriate driver program for that motherboard.

Or please contact your motherboard nearest dealer for motherboard driver.

English

Software Installation- 9 -

3.1.2. DirectX Installation

Install Microsoft DirectX to enable 3D hardware acceleration support for Windows® 2000

or Windows® XP to achieve better 3D performence.

English

M Note: For software MPEG support in Windows® 2000 or Windows® XP, you must

install DirectX first.

Step 1. When autorun window show up, click

Install DirectX 9 item.

Click "Install DirectX 9" item.

Step 2. Choose I accept the agreement and

Click "Next" button.

Installing the components.

GV-RX60P128D(DE) Graphics Accelerator - 10 -

Step 3. Click "Next" button.

Step 4. Click "Finish" to restart computer.

Then the DirectX 9 installation is completed.

3.1.3. Driver Installation

A. New hardware found

After the graphics card is inserted into your computer at the first time, the windows will

automatically detect a new hardware in the system and pop out a "New Hardware Found"

message. The following is the step-by-step installation guide.

Step 1: Found new hardware wizard: Video controller (VGA Compatible)

Click "Next" button to install the driver. (There is

a driver CD disk that came with your graphics

accelerator, please insert it now.)

Or click the "Cancel" button to install the driver

from AUTORUN window.

Step 2: Found new hardware wizard: Searching and installing

The wizard will search for the driver and install it automatically.

English

Step 3: Found new hardware wizard: Finish

Click the "Finish" button to finish the installation.

Software Installation- 11 -

+ 24 hidden pages