Third-party br ands a nd names are t he proper ties of th eir res pecti ve own ers.
Notice
Please do not remove any label s on t his g raphics c ar d. Doin g so may v oid t he wa rranty of this c ard .
Due to rapid change in techn olog y, some of the spe cific ation s might be out of da te be fore publ icat ion of t his thi s manual .
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author
make a commitment to upd ate th e info rmatio n co ntained herei n.
Rovi Product Notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited
viewing uses only u nless otherwis e authori zed by Rovi Corp oration . Reverse enginee ring or di sas sembly is prohibi ted.
-1 GB or more of system memory for best performance
-Optical drive for software installation (CD-ROM or DVD-ROM drive)
-A power supply that provides at least 550-watt and with one 75w 2x3-pin PCIe power
and one 150w 2x4 pin PCIe power connector is required. The power supply should be
with a known brand and certified to conform to safety regulations. (For the list of certified
power supplies, go to http://ati.amd.com/certifiedpsu.) (GV-R697OC2-2GD /
GV-R697OC-2GD / GV-R697UD-2GD Rev1.0 / GV-R697UD-2GD Rev2.0)
-A power supply that provides at least 500-watt and with two 75w 2x3-pin PCIe power
connector is required. The power supply should be with a known brand and certified to
conform to safety regulations. (For the list of certified power supplies, go to
http://ati.amd.com/certifiedpsu.)(GV-R695OC-1GD / GV-R695UD-1GD)
• Operating System
-Windows® 7
-Windows® Vista
-Windows® XP with Service Pack 2 (SP2)
-Windows® XP Professional x64 Edition
• CrossFireXTM Configuration
If you are planning on using this graphics card as part of a CrossFireX system, the following
is required:
-A CrossFireX certified motherboard with two PCI Express x16 slots and correct chipset driver
-A power supply that provides at least 600-watt and with two 2x3-pin PCIe power and
two2x4 pin PCIe power connectors is required. The power supply should be with a
known brand and certified to conform to safety regulations. (For the list of certified power
supplies, go to http://ati.amd.com/certifiedpsu.)(GV-R697OC2-2GD / GV-R697OC-2GD /
GV-R697UD-2GD Rev1.0 / GV-R697UD-2GD Rev2.0)
-A power supply that provides at least 600-watt and with four 2x3-pin PCIe power
connectors is required. The power supply should be with a known brand and certified to
conform to safety regulations. (For the list of certified power supplies, go to
http://ati.amd.com/certifiedpsu.)(GV-R695OC-1GD / GV-R695UD-1GD)
-One or two CrossFire bridge interconnect cables
TM
- 8 -GV-R6900 Series Graphics Accelerator
/Phenom
TM
2.1. Board Layout
1. GV-R697OC2-2GD
CrossFire Connector
DisplayPort Connector
HDMI Connector
DVI-D Connector
DVI-I Connector
Digital LCD Monitor
HDMI TV
HDMI TV
2. Hardware Installation
DisplayPort
Connector
HDMI
Connector
DVI-I
Connector
Digital LCD Monitor
or
Analog LCD Monitor Analog Monitor
DVI Output
DVI-D
Connector
D-Sub
Output
DVI-I to D-Sub
Adapter
- 9 -Hardware Installation
2. GV-R697OC-2GD
CrossFire Connector
DisplayPort Connector
HDMI Connector
DVI-D Connector
DVI-I Connector
Digital LCD Monitor
HDMI TV
HDMI TV
DisplayPort
Connector
HDMI
Connector
DVI-I
Connector
Digital LCD Monitor
or
Analog LCD Monitor Analog Monitor
DVI Output
DVI-D
Connector
D-Sub
Output
DVI-I to D-Sub
Adapter
- 10 -GV-R6900 Series Graphics Accelerator
3.GV-R697UD-2GD Rev2.0
CrossFire Connector
DisplayPort Connector
HDMI Connector
DVI-D Connector
DVI-I Connector
Digital LCD Monitor
HDMI TV
HDMI TV
DisplayPort
Connector
HDMI
Connector
DVI-I
Connector
Digital LCD Monitor
or
Analog LCD Monitor Analog Monitor
DVI Output
DVI-D
Connector
D-Sub
Output
DVI-I to D-Sub
Adapter
- 11 -Hardware Installation
4. GV-R697UD-2GD Rev1.0
CrossFire Connector
DisplayPort Connector
HDMI Connector
DVI-D Connector
DVI-I Connector
Digital LCD Monitor
HDMI TV
HDMI TV
DisplayPort
Connector
HDMI
Connector
DVI-I
Connector
Digital LCD Monitor
or
Analog LCD Monitor Analog Monitor
DVI Output
DVI-D
Connector
D-Sub
Output
DVI-I to D-Sub
Adapter
- 12 -GV-R6900 Series Graphics Accelerator
5. GV-R695OC-1GD
CrossFire Connector
DisplayPort Connector
DVI-D Connector
DVI-I Connector
Digital LCD Monitor
HDMI TV
HDMI TV
HDMI Connector
DisplayPort
Connector
HDMI
Connector
DVI-I
Connector
Digital LCD Monitor
or
Analog LCD Monitor Analog Monitor
DVI Output
DVI-D
Connector
D-Sub
Output
DVI-I to D-Sub
Adapter
- 13 -Hardware Installation
6. GV-R695UD-1GD
CrossFire Connector
DisplayPort Connector
DVI-D Connector
DVI-I Connector
Digital LCD Monitor
HDMI TV
HDMI TV
HDMI Connector
DisplayPort
Connector
HDMI
Connector
DVI-I
Connector
Digital LCD Monitor
or
Analog LCD Monitor Analog Monitor
DVI Output
DVI-D
Connector
D-Sub
Output
DVI-I to D-Sub
Adapter
- 14 -GV-R6900 Series Graphics Accelerator
The entire Radeon HD 6900 series support HDMI output which can handle both audio and
video signals. However, audio output from the onboard audio controller or the external
sound card will be disabled when HDMI output is activated.
If no need for HDMI output function, set the onboard audio controller or the external sound
card to be the default Sound Playback device to obtain audio output from your system.
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some
precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not
have one, touch both of your hands to a safely grounded object or to a metal object,
such as the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static
electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-static
mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF THE GRAPHICS CARD IS
DAMAGED.
In order to ensure that your graphics card can work correctly, please use
official GIGABYTE BIOS only. Using non-official GIGABYTE BIOS might
cause problem(s) on the graphics card.
- 15 -Hardware Installation
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.