- 7 - Introduction
1. Introduction
1.1. Features
• Powered by A TI Radeon
TM
HD 5670 Graphics Processing Unit (GPU)
• Supports PCI Express 2.1
• GV-R567HM-1GI supports ATI HyperMemory
TM
technology which enables graphics card
performance by allowing the graphics processing unit (GPU) to dynamically share the
available system memory. The total effective VGA memory differs depending on system
memory.
(Note1)
• Integrated with 1 GB/512MB GDDR5 memory
• Supports DirectX 1 1
• Supports CrossFireX
TM
• Supports 1 Dual-Link DVI-I connector
• Supports 1 D-Sub connector
• Supports 1 HDMI connector
1.2. Minimum System Requirements
• Hardware
- Intel® Pentium® 4/CoreTM 2 or AMD Athlon
TM
/Phenom
TM
- 1 GB or more of system memory for best performance
- Optical drive for software installation (CD-ROM or DVD-ROM drive)
- A power supply that provides at least 400-watt is required. The power supply should be
with a known brand and certified to conform to safety regulations. (For the list of certified
power supplies, go to http://ati.amd.com/certifiedpsu.)
• Operating System
- Windows® 7
- Windows® Vista
- Windows® XP with Service Pack 2 (SP2)
- Windows® XP Professional x64 Edition
• CrossFireXTM Configuration
If you are planning on using this graphics card as part of a CrossFireX system, the following
is required:
- A CrossFireX certified motherboard with two PCI Express x16 slots and correct chipset driver
- Two GV-R567D5-512I/GV-R567HM-1GI/GV-R567ZL-1GI/GV-R567OC-1GI rev1.0/1.1/
GV-R567OC-1GI rev2.0
- A power supply that provides at least 450-watt is required. The power supply should be
with a known brand and certified to conform to safety regulations. (For the list of certified
power supplies, go to http://ati.amd.com/certifiedpsu.)
- Two CrossFire bridge interconnect cables