Gigabyte GV-N68T256D User Manual

VGA Card
GV-N68T256D
Jul. 21, 2004
VGA Card
GV-N68T256D
Jul. 21, 2004
GV-N68T256D
GeForce™ 6800 GT Graphics Accelerator
User's Manual
Rev. 101 12MD-N68T256D-101
Copyright
© 2004 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in
any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on VGA card, this may void the warranty of this VGA card.
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make
a commitment to update the information contained herein.
Table of Contents
English
1. Introduction ......................................................................................... 3
2. Hardware Installation...........................................................................4
3. Software Installation ............................................................................8
1.1. Features ..................................................................................................... 3
1.2. Minimum System Requirement .................................................................. 3
2.1. Board Layout .............................................................................................. 4
2.2. Hardware Installation .................................................................................. 6
3.1. Win® XP Driver and Utilities Installation ...................................................... 8
3.1.1. Operating System Requirement ....................................................................................... 8
3.1.2. DirectX Installation ............................................................................................................ 9
3.1.3. Driver Installation ............................................................................................................. 11
3.1.4. Utilities on Driver CD ...................................................................................................... 13
3.1.5. Taskbar Icon .................................................................................................................... 15
3.1.6. Display Properties Pages ............................................................................................... 18
3.1.7. nView Properties Pages ................................................................................................. 23
3.2. Win® 2000 Driver Installation .................................................................... 28
3.3. BIOS Flash Utility ..................................................................................... 28
4. Troubleshooting Tips .........................................................................29
5. Appendix ...........................................................................................30
5.1. How to Reflash the BIOS .......................................................................... 30
5.1.1. Reflash BIOS in MS-DOS mode .................................................................................... 30
5.1.2. Reflash BIOS in Windows mode .................................................................................... 30
5.2. Resolutions and Color Depth Table (In Windows® XP) ............................. 31
GV-N68T256D Graphics Accelerator - 2 -
1. Introduction
1.1. Features
Powered by NVIDIA® GeForce™ 6800 GT Graphics Processing Unit (GPU)
Supports the new AGP 8X
Integrated with 256MB DDR III memory
Supports DirectX 9.0
Supports TV-Out and D-Sub connectors
Supports DVI-I connector
1.2. Minimum System Requirement
IBM® or 100% PC compatible with Pentium® III 650MHz or AMD Athlon 650MHz
class processor or higher
One available AGP3.0 compliant slot or better
Operating Systems Win® 2000 / Win® XP
64MB system memory
50MB of available disk space for full installation
CD-ROM or DVD-ROM drive
English
Introduction- 3 -
2.1. Board Layout
English
2. Hardware Installation
TV-Out
DVI-I Connector
VGA Monitor Connector
(15 pins)
OR
Analog Monitor
AV Output
S-VideoOutput
DVI Output
VGA Output
VGA Output
NTSC / PAL TV
Projector
Digital LCD Monitor
Analog LCD Monitor
Analog LCD Monitor
GV-N68T256D Graphics Accelerator - 4 -
DVI-I to D-Sub Connector
S-Video
DVI-I Connector
VGA Monitor
Connector
(15pin)
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow
some precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not
have one, touch both of your hands to a safely grounded object or to a metal object,
such as the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by
static electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-
static mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON
THE CARD.
In order to ensure your graphics card working correctly, please use official
Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem
on the graphics card.
English
Hardware Installation- 5 -
2.2. Hardware Installation
Installing Your graphics card.
English
Now that you have prepared your computer, you are ready to install your graphics
accelerator card.
To install your graphics accelerator card:
1. Power off the computer and monitor, then
2. Remove the computer cover. If necessary,
disconnect the display cable from the back
of your computer.
consult your computer's manual for help
in removing the cover.
3. Remove any existing graphics card from
your computer.
Or, if your computer has any on-board
graphics capability, you may need to
disable it on the motherboard. For more
information, see your computer
documentation.
GV-N68T256D Graphics Accelerator - 6 -
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align
your graphics card with the AGP slot, and
press it in firmly until the card is fully
seated.
5. Replace the screw to fasten the card in
place, and replace the computer cover.
After installation, please connect the power cable to your
GV-N68T256D graphics card, or the system will not boot.
English
6. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
To TV or VCR
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
Hardware Installation- 7 -
3. Software Installation
English
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
The installation of Win® 2000 / Win® XP drivers is very simple. When you insert the driver
CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show up,
run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.
(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics
accelerator.)
3.1. Win® XP Driver and Utilities Installation
3.1.1. Operating System Requirement
When loading the graphics card drivers for the system, please make sure your
system has installed DirectX 9 or later version.
If you install the graphics card drivers for the motherboard, which consist of SIS or
VIA chipsets, please install the appropriate driver program for that motherboard.
Or please contact your motherboard nearest dealer for motherboard driver.
GV-N68T256D Graphics Accelerator - 8 -
3.1.2. DirectX Installation
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows® 2000
or Windows® XP to achieve better 3D performence.
0 Note: For software MPEG support in Windows® 2000 or Windows® XP, you must
install DirectX first.
Step 1. When autorun window show up,
click Install DirectX 9 item.
Click "Install DirectX 9" item.
Step 2. Choose I accept the agreement and
Click "Next" button.
English
Step 3. Click "Next" button.
Software Installation- 9 -
English
Installing the components.
Step 4. Click "Finish" to restart computer.
Then the DirectX 9 installation is completed.
GV-N68T256D Graphics Accelerator - 10 -
Loading...
+ 28 hidden pages