GIGABYTE G-Power Lite Owner's Manual

Intel® Pentium® 4 LGA775 / mPGA478 / AMD AM2 (940) /
K8(939/754)

Installation Guide

GH-PDU22-SC

REV.1002

051227

English

Table of Content

Checklist...............................................................................................................3

Specification.........................................................................................................4

Feature................................................................................................................4

Warranty Item.......................................................................................................5

Precautions..........................................................................................................5

Installation Instructions for P4 LGA775RM & Cooler.............................................6

Installation Instructions for Intel® Pentium® 4 mPGA478 Clips................................7

Installation Instructions for AMD AM2 (940) / K8 (939 / 754) Clip...........................8

Installation of the Fan Speed Control Cable........................................................ 9

GH-PDU22-SC

- 2 -

Checklist

English

(1)GH-PDU22 -SC Cooler

(2)LGA775 RM

(8) GH-PDU22-SC
user's manual

(3) P4 clips
( mPGA478 /
LGA 7 75 )

(4) AM2 / K8 clip

(5) Heat sink paste

- 3 -

(6) Screw

(7) Fan Speed
Control Cable

GH-PDU22-SC

Specification

English

y Fan Dimension : 110x110 x 25mm
y Heat Sink Dimension : 110x110 x 109mm
y Heatpipe Number : 3

y Base Maerial : Copper w/ Ni coating
y Fin Material : Aluminum fin

y Rated Current :
y Fan Speed : 2,450 rpm (default) / 2,000 rpm (low speed)
y Rated Voltage : 12V
y Noise :23.1 dBA at 2,000 rpm(with fan speed cable)

27.5 dBA at 2,450 rpm (default)

y Bearing Type: EVR Sleeve

y Airflow : 41~48.5 CFM

y Life Expectancy : 40,000 hr

y Total Weight : 430 g

y Application :

Feature

y Universal design fits all mainstream platforms
y Omni-directional cooler design with new advanced sintered powder wicks
y Quad-Way Airflow Design - Fully compliant with MOSFET thermal functions
y Solid pure copper base with nickel-plating finish
y High-density fin placement maximizes heat dissipation area
y Value adding accessories

0.13Amp (2,000rpm) ~ 0.18Amp(2,450rpm)

®

Pentium® 4 LGA775

Intel

®

Pentium® 4 478

Intel
AMD AthlonTM (939 / 754) / AM2 (940)

GH-PDU22-SC

- 4 -

Precautions

The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify

actual fan speed levels.
Before use, please remove the bottom protective layer of the cooler.
Please make sure the computer is turned off and its power disconnected prior to installation.

Warranty Item

<Warranty coverage does not include the following>

Incorrect method of operation or use of product not for intended use
Operational use beyond the advised standards (eg. overclocking)
Inability to install the product as a result of incompatibility with the motherboard used
Damage of product as a result of other product components
Any form of alteration to original product
A faulty product that leads to harm or damage to other products
Damage caused by natural disasters (eg. earthquake, fire, flood)
Products with a warranty sticker that is removed, torn or unreadable
Due to the weight of the cooler exceeding normal standards, please remove the cooler before computer transport to
prevent damage to the cooler itself as well as prevent problems during installtion.

English

- 5 -

GH-PDU22-SC

Installation Instructions for P4 LGA775RM & Cooler

English

Side A

Figure3- 1

GH-PDU22-SC

Plastic
Washers

Side B

ARM

CAM

Figure 1

Figure 2

Figure3-2

Figure 3
Gently push down on the cooler unit to lock it into position.
(Figure3-1).Connect the 3-pin connector to the CPU fan
connector on the motherboard.(Figure 3-2).Installation is now
complete.

If fan speed control is required, please refer to "Installation of the

Fan Speed Control Cable".
Note: About P4 Clips installation, please refer to “Installation
Instructions for Intel® Pentium®4 mPGA478 Clips”

To install GH-PDU22-SC on LGA775
motherboard needs both LGA775 RM & P4
clips.

Please add an adequate layer of heat sink
paste on the surface of the CPU.

Figure 1
Place the LGA775RM onto the LGA775 motherboard so that
side A is parallel with ARM and side B is parallel with CAM.

Figure 2
From the underside of the motherboard, use screws (4) and
plastic washers (4) together to secure the LGA775RM into
place..

- 6 -

Installation Instructions for Intel® Pentium® 4 mPGA478 Clips

Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU(Figure1-1). Figure 1-2 showing the correct

Figure 1-1

Figure 3-1

Figure 1-2

C

B

A

Figure 2

Figure 3-2

Figure 4

installation of the cooler atop the CPU.

Figure 2
Clip introduction-­Part A: Secured to the retention mechanism hook.
Part B: Tightly contact the cooler bracket.
Part C: Secured to the retention mechanism hook.

Figure 3
Secure Parts A, B, and then C of the clip to the retention
mechanism. Assure that Part C is secured to the retention
mechanism hook on the same side as the heat pipes.

Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. Clips Installation is now complete.

If fan speed control is required, please refer to "Installation of
the Fan Speed Control Cable".

- 7 -

English

GH-PDU22-SC