GIGABYTE GN-FE605M User Manual
GN-FE605(M) PCI Adapter User’s Guide
GN-FE605(M) 10/100
Fast Ethernet PCI Adapter
User’s Guide
http://www.gigabyte.com.tw
Rev. 1.0 First Edition
i
GN-FE605(M) PCI Adapter User’s Guide
Contents
1. SAFETY, CARE AND REGULATORY INFORMATION............................. 1
2. INTRODUCTION...............................................................................................5
ONTENTS OF YOUR SHIPMENT ..........................................................................5
C
GN-FE605(M) FAST ETHERNET PCI ADAPTER INDICATOR DESCRIPTION ..........6
FAST ETHERNET PORT LED INDICATOR DESCRIPTION .........................................6
GN-FE605(M) FAST ETHERNET PCI ADAPTER BLOCK DIAGRAM......................6
3. ADAPTER SPECIFICATIONS.........................................................................7
4. KEY FEATURES ................................................................................................8
5. INSTALLATION PROCEDURES....................................................................9
5.1 INSERT THE NETWORKING INTERFACE CARD .............................................9
5.2 INSTALL THE NETWORK DRIVER ................................................................9
5.3 SOFTWARE DRIVERS ................................................................................ 10
6. TROUBLESHOOTING ................................................................................... 11
7. APPENDIX........................................................................................................ 11
(A)WAKE-ON-LAN (WOL).............................................................................. 11
(B) DRIVER INSTALLATION FOR GN-FE605 .....................................................12
Windows NT4.0 ........................................................................................12
Windows 2000/XP.................................................................................... 17
Windows 95/98/Me...................................................................................20
RIVER INSTALLATION FOR GN-FE605M..................................................24
(C) D
Windows NT4.0 ........................................................................................24
Windows 2000/XP.................................................................................... 29
Windows 95/98/Me...................................................................................32
8. LIMITED WARRANTY ..................................................................................36
ii
GN-FE605(M) PCI Adapter User’s Guide
1. Safety, Care and Regulatory Information
Important safety information
Read and follow all instructions marked on the product and in the
documentation before you operate your system. Retain all safety and operating
instructions for future use.
The product should be operated only from the type of power source indicated
on the rating label.
If your computer has a voltage selector switch, make sure that the switch is in
the proper position for your area. The voltage selector switch is set at the
factory to the correct voltage.
The plug-socket combination must be accessible at all times because it serves
as the main disconnecting device.
All product shipped with a three-wire electrical grounding-type plug only fits
into a grounding-type power outlet. This is a safety feature. The equipment
grounding should be in accordance with local and national electrical codes. The
equipment operates safely when it is used in accordance with its marked
electrical ratings and product usage instructions
Do not use this product near water or a heat source.
Set up the product on a stable work surface or so as to ensure stability of the
system.
Openings in the case are provided for ventilation. Do not block or cover these
openings. Make sure you provide adequate space around the system for
ventilation when you set up your work area. Never insert objects of any kind
into the ventilation openings.
To avoid electrical shock, always unplug all power cables and modem cables
from the wall outlets before removing covers.
Allow the product to cool before removing covers or touching internal
components.
Precautions for Products With Laser Devices
Observe the following precautions for laser devices:
Do not open the CD-ROM drive, make adjustments, or perform procedures on
a laser device other than those specified in the product’s documentation.
Only authorized service technicians should repair laser devices.
1
GN-FE605(M) PCI Adapter User’s Guide
Precautions for Products With Modems, Telecommunications, or
Local Area Network Options
Observe the following guidelines when working with options:
Do not connect or use a modem or telephone during a lightning storm. There
may be a risk of electrical shock from lightning.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications
line cord.
Do not plug a modem or telephone cable into the network interface controller
(NIC) receptacle.
Disconnect the modem cable before opening a product enclosure, touching or
installing internal components, or touching an uninsulated modem cable or
jack.
Do not use a telephone line to report a gas leak while you are in the vicinity of
the leak.
Federal Communications Commission (FCC) Statement
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC
emission limits. Neither the provider nor the manufacturer are responsible for any radio or
television interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
2
GN-FE605(M) PCI Adapter User’s Guide
FCC part 68 (applicable to products fitted with USA modems)
The modem complies with Part 68 of the FCC Rules. On this equipment is a label that
contains, among other information, the FCC registration number and Ringer Equivalence
Number (REN) for this equipment. You must, upon request, provide this information to your
telephone company.
If your telephone equipment causes harm to the telephone network, the Telephone
Company may discontinue your service temporarily. If possible, they will notify in
advance. But, if advance notice is not practical, you will be notified as soon as possible.
You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect proper operation of your equipment. If they do, you will be
notified in advance to give you an opportunity to maintain uninterrupted telephone service.
The FCC prohibits this equipment to be connected to party lines or coin-telephone service.
The FCC also requires the transmitter of a FAX transmission be properly identified (per
FCC Rules Part 68, Sec. 68.381 (c) (3)).
/ for Canadian users only /
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the radio interference regulations of Industry
Canada.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le
brouillage radioélectrique édicté par Industrie Canada.
DOC notice (for products fitted with an Industry Canada-compliant
modem)
The Canadian Department of Communications label identifies certified equipment. This
certification means that the equipment meets certain telecommunications network
protective, operational and safety requirements. The Department does not guarantee the
equipment will operate to the user satisfaction.
Before installing this equipment, users ensure that it is permissible to be connected to the
facilities of the local Telecommunications Company. The equipment must also be installed
using an acceptable method of connection. The customer should be aware that
compliance with the above conditions might not prevent degradation of service in some
situations. Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by the
user to this equipment, or equipment malfunctions, may give the telecommunications
3
GN-FE605(M) PCI Adapter User’s Guide
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the
power utility, telephone lines and internal metallic water pipe system, if resent are
connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should
contact the appropriate electric inspection authority, or electrician, as appropriate.
NOTICE: The Load Number (LN) assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop which is used by the
device, to prevent overloading. The termination on a loop may consist of any combination
of devices subject only to the requirement that the sum of the Load Numbers of all the
devices does not exceed 100.
/ for European users only /
European Community Directive Conformance Statement
This product is in conformity with the protection requirements of EC Council Low
Voltage Directive (Safety) 73/23/EEC, EMC Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electro-magnetic
compatibility.
R&TTE Directive (applicable to products fitted with European modems)
This modem does not require any physical and/or software additional switch settings
from the User and is suitable for use only on telephone lines provided with
Multi-Frequency Dialing facilities.
The equipment has been approved in accordance with Council Decision 99/5/EC on
radio equipment and terminal telecommunication equipment and the mutual recognition
of their conformity.
4
GN-FE605(M) PCI Adapter User’s Guide
2. Introduction
Welcome to the Gigabyte GN-FE605(M) 10/100 Fast Ethernet PCI Adapter
User’s Guide. Before start, please check your Ethernet Card is GN-FE605 or
FE605M. The user’s guide provides instructions for configuration software for
the Gigabyte GN-FE605(M) 10/100 Fast Ethernet PCI Adapter to your system.
To start the installation, read through each chapter for required information.
Contents of Your Shipment
Before the installation procedures, please ensure the components are not
damaged during the shipping. The shipment of the NIC includes:
Antistatic bag (used for protecting the networking interface card during the
shipment). Do not remove the product from its packaging until it is ready for
installation.
The installation CD with the network driver software and documentation.
One Wake On LAN cable
Contact your network supplier immediately for any missing or damaged
components. If you require returning the damaged product (NIC), you must
pack it in the original packing material or the warranty will be voided.
5
GN-FE605(M) PCI Adapter User’s Guide
(M)
GN-FE605(M) Fast Ethernet PCI Adapter Indicator Description
The faceplate on the 10/100 BASE-T NIC provides an RJ-45 connector for
connecting the card to another network device.
Fast Ethernet Port LED indicator description
LED Status Description
On 100Mbps Ethernet link active 10/100
Off 10Mbps Ethernet link active
Link/ACT
On Ethernet Link active
Off No connection
Blinking Package transmit
GN-FE605(M) Fast Ethernet PCI Adapter Block Diagram
6
3. Adapter Specifications
Feature Value
Interfaces 10/100-T Full/Half Duplex MAC
Crossover Auto MDI/MDIX
Controller-Processor VIA-VT6105(M)
PCI Bus support PCI 2.2/2.1
Communication Standard IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
Network Management WOL : Wake on LAN
ACPI 1.0
DMI 2.0
GN-FE605(M) PCI Adapter User’s Guide
Advanced Function
for FE605M
Hardware Checksum off Loading(IP, TCP, UDP)
LBFO : Load Balance and Fail Over
Supported OS Windows 95/98, ME, NT3.5 or later
Windows2000 and Windows XP
RedHat6.2 or later
FreeBSD4.2, SCO3.2.4, SCO5.X, Unixware7
DOS6.22
LED Indicators Speed, Link, Active
Temperature
Operating temperature 0°C to 50°C
Storage temperature -25°C to 55°C
Humidity 5% to 90% non-condensing
Dimension 120mm * 42mm
Weight
Gross Weight 60 ± 5 g
7
GN-FE605(M) PCI Adapter User’s Guide
4. Key Features
GN-FE605(M) 10/100 Fast Ethernet PCI Adapter contains the several features.
These features provide respective advantages to your system. The key features of
the adapter are:
GN-FE605
10/100-T Full/Half Duplex MAC
Auto-Negotiation with Automatic Crossover MDI/MDIX
Wake on LAN
ACPI 1.0
DMI 2.0
GN-FE605M
10/100-T Full/Half Duplex MAC
Auto-Negotiation with Automatic Crossover MDI/MDIX
Hardware Checksum off Loading (IP, TCP, UDP)
Support IEEE802.1q VLAN Tagging support
Support IEEE802.1p Priority Tagging support
LBFO : Load Balance and Fail Over
Wake on LAN power management
ACPI 1.0
DMI 2.0
8
GN-FE605(M) PCI Adapter User’s Guide
5. Installation Procedures
5.1 Insert the Networking Interface Card
Step1. Switch off the computer, unplug the power cord, and remove the
computer’s cover.
Step2. Select an unused PCI bus-master slot and remove its protective bracket.
Step3. Push the Adapter into the slot until the adapter is securely seated. Then
secure the adapter bracket with a screw.
Step4. Attached the Wake-On-LAN cable (Optional). If you require
Wake-On-LAN capability from a powered-off state, attach one end of
the 3-pin Wake-On-LAN cable to the connector on the top edge of the
card, and the other end to the “5 V Standby” connector on the
computer’s motherboard.
Step5. Connect the Adapter directly to a 10BASE-T or 100BASE-TX hub or
switch using UTP cable (Category 3,4 or 5for 10BASE-T；Category 5
for 100BASE-TX). The maximum allowable length of UTP cable
connections is 100 meters (328ft). When inserting an RJ-45 plug, be
sure the tab on the plug clicks into position to ensure that it is properly
seated.
Step6. Put back the computer cover and plug in the power cord.
Step7. Turn the power on. The computer's PCI BIOS automatically assigns
resources to the Adapter.
5.2 Install the Network Driver
You can install the Network drivers from the Gigabyte Software CD. The
Software CD that accompanies the GN-FE605(M) PCI Adapter contains all the
network operating system drivers supported by this Adapter. The instructions of
software installation are given as README files on the CD. Review the root
directory README for overview information, and for full installation details,
see the README and referenced instruction files in the sub-directory
9
GN-FE605(M) PCI Adapter User’s Guide
appropriate to your network operating system.
Note: Before installing the networking interface card, make sure your system
meets the requirements listed for your operating system.
Note: If you are installing a driver in a computer with other existing adapters,
be sure to update all the adapters and ports with the same new software.
This will ensure that all adapters will work correctly.
5.3 Software Drivers
Microsoft windows 95 \ 98 \ ME Microsoft windows 2000 \ XP
Microsoft windows NT4.0 \ NT3.51 Windows for Workgroup 3.11
SCO Unix 5.04 Unixware 7
Linux Driver FreeBSD 3.2 \ 4.x
Note: Please refer to Appendix(B)、(C) for the “Windows” driver installation. For
the other Operating Systems, like Unix…, please refer to the text file in the
CD for the further information.
10
Loading...