Introduction
Congratulations on your purchase of the most innovative mini wireless mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable.
Safety Notice
This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.
Please DO NOT direct the laser beam at anyone's eyes.
Features
2.4GHz Wireless laser mouse |
|
|
Using state-of-art technology. High tracking speed and sensitivity. |
||
Up to 10m effective working distance |
|
|
USB Nano transceiver |
|
|
Longer battery life |
|
|
4 Directional Scrolling |
|
|
Auto-Link, Plug and Play! No need to set the channel ID. |
|
|
800/1600 DPI adjustable button |
Internet Forward & Backward button |
|
Battery indicator |
||
|
||
Power on/ off switch |
|
|
Back & Forward buttons |
|
|
Stylish and modern shape with comfort grip |
|
|
Mouse |
|
|
Wheel button |
Receiver |
|
|
Dpi button |
Receiver |
Low power indicator |
|
Battery cover |
ID reset button |
|
|
Receiver release |
Power on/off switch |
|
|
button |
|
A.Hardware Installation
1.Insert the batteries
a.Remove the battery compartment cover on the bottom case of the mouse.
b.Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c.Close the battery compartment cover properly.
d.Make sure the Power on-off swich on the bottom of the mouse is ON.
e.The Low Power LED on the wheel bar will blink 3 seconds if the mouse power is on.
2 * AAA batteries
Battery compartment cover
+
-
A wrong battery placement may cause batteries overheat.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been sucessfully swithced.
2. Connect the receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC
Press the receiver release button
PC
USB port