Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2006, Award Software, Inc.
VM800PMC D5
.
.
.
.
<DEL>:BIOS Setup/Q-Flash, <F9>: Xpress Recovery2, <F12>: Boot Menu
10/31/2006-P4M800Pro-823-6A7L6G0FC-00
< > < ><Enter>
<ESC>
Boot Menu
== Select a Boot First device ==
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
USB-CDROM
USB-HDD
LAN
KL:Move Enter :Accept ESC:Exit
(BIOSD5)
CMOS SETUP
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
<F12>: Boot Menu
<Enter>
F8: Q-FlashF10: Save & Exit Setup
Time, Date, Hard Disk Type...
KLJI: Select Item
1."Ctrl + F1"
BIOS
2."Load Optimized Defaults"
3.BIOS
GA-VM800PMC- 28 -
Standard CMOS Features (CMOS)
Advanced BIOS Features (BIOS)
BIOS
Integrated Peripherals ()
IDESATAUSBIEEE1394
COM portLPT portAC97
Power Management Setup ()
CPU
PnP/PCI Configuration (PCI)
ISAPnPPCI
PC Health Status ()
Load Fail-Safe Defaults (Fail-Safe)
BIOSCMOS
Load Optimized Defaults (Optimized)
CMOS
Set Supervisor Password ()
SETUPCMOS
Set User Password ()
PCBIOS
Save & Exit Setup ()
SETUPBIOS
<F10>
Exit Without Saving (SETUP)
<ESC>
BIOS- 29 -
2-1Standard CMOS Features (CMOS)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Date (mm:dd:yy)Wed, Nov 22 2006
Time (hh:mm:ss)10:40:9
` IDE Channel 0 Master[None]
` IDE Channel 0 Slave[None]
` IDE Channel 1 Master[None]
` IDE Channel 1 Slave[None]
` IDE Channel 2 Master[None]
` IDE Channel 3 Master[None]
First Boot Device[Floppy]
Second Boot Device[Hard Disk]
Third Boot Device[CDROM]
Password Check[Setup]
CPU Hyper-Threading
Limit CPUID Max. to 3
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
CPU Thermal Monitor 2(TM2)
CPU EIST Function
Virtualization Technology
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
Floppy
LS120LS120
Hard Disk
CDROM
ZIPZIP
USB-FDDUSB
USB-ZIPUSB-ZIP
USB-CDROMUSB
USB-HDDUSB
Legacy LAN
Disabled
Password Check ()
SystemCMOS SETUP
SetupCMOS SETUP()
SETUP<Enter>
CPU Hyper-Threading (CPU)
EnabledCPU
()
Disabled
Limit CPUID Max. to 3
Enabled(NT4.0)
Disabled()
No-Execute Memory Protect
EnabledNo-Execute Memory Protect()
Disabled
CPU Enhanced Halt (C1E)
EnabledCPU Enhanced Halt (C1E)()
Disabled
CPU Thermal Monitor 2 (TM2)
EnabledCPU Thermal Monitor(TM2)()
Disabled
CPU EIST Function
EnabledCPU EIST ()
Disabled
Virtualization Technology
EnabledVirtualization Technology()
Disabled
( )
( )
( )
( )
( )
( )
( )
( )
BIOS- 33 -
2-3Integrated Peripherals ()
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
OnChip IDE Channel 0[Enabled]
OnChip IDE Channel 1[Enabled]
VIA Onboard LAN[Enabled]
OnBoard LAN Boot ROM[Disabled]
OnChip Serial ATA[Enabled]
SATA Mode[IDE]
AC97 Audio[Auto]
USB 1.1 Controller[Enabled]
USB 2.0 Controller[Enabled]
USB Keyboard Support[Disabled]
USB Mouse Support[Disabled]
Legacy USB storage detect[Enabled]
Onboard Serial Port 1[3F8/IRQ4]
Onboard Serial Port 2[2F8/IRQ3]
Onboard Parallel Port[378/IRQ7]
Parallel Port Mode[SPP]
x EPP Mode SelectEPP1.7
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
ACPI Suspend Type[S1(POS)]
x USB Device Wake-Up From S3Disabled
Soft-Off by PWRBTN[Instant-Off]
AC BACK Function[Soft-Off]
Keyboard Power On[Disabled]
Mouse Power On[Disabled]
PME Event Wake Up[Enabled]
Modem Ring Resume[Enabled]
Resume by Alarm[Disabled]
x Date (of Month) AlarmE veryday
x Time (hh:mm:ss) Alarm0 : 0 : 0
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Reset Case Open Status[Disabled]
Case OpenedNo
VCOREO K
DDR POWEROK
+3.3VOK
+12VOK
System Temperature29oC/84oF
CPU Temperature30oC/86oF
Current SYS FAN Speed0 RPM
Current CPU FAN Speed3245 RPM
System Warning Temp.[Disabled]
CPU Warning Temp.[Disabled]
SYS FAN Fail Warning[Disabled]
CPU FAN Fail Warning[Disabled]
CPU Smart FAN Control
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
ESC: QuitKLJI: Select Item
F8: Q-FlashF10: Save & Exit Setup
Load Fail-Safe Defaults (Y/N)? N
Load Fail-Safe Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
<Y> <Enter>BIOSFail-
Safe DefaultsFail-Safe Defaults
2-8Load Optimized Defaults (Optimized)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Load Optimized Defaults (Y/N)? N
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: QuitKLJI: Select Item
F8: Q-FlashF10: Save & Exit Setup
Load Optimized Defaults
<Y> <Enter>CMOS
BIOS- 41 -
2-9Set Supervisor/User Password (/)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
ESC: QuitKLJI: Select Item
F8: Q-FlashF10: Save & Exit Setup
Enter Password:
Change/Set/Disable Password
8Enter BIOS
EnterBIOSPASSWORD DISABLED
Supervisor
SupervisorAdvanced BIOS FeaturesPassword Check
"Setup"CMOS SETUPSupervisor
User
UserAdvanced BIOS FeaturesPassword Check
SYSTEMUser Supervisor
CMOS SETUPUSER PasswordBIOS
SupervisorCMOS SETUP
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
GA-VM800PMC- 42 -
2-10 Save & Exit Setup (SETUP)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
ESC: QuitKLJI: Select Item
F8: Q-FlashF10: Save & Exit Setup
Save to CMOS and EXIT (Y/N)? Y
Save Data to CMOS
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
<Y> <Enter>RTCCMOSSetup Utility
<N> <Esc>
2-11 Exit Without Saving (SETUP)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Quit Without Saving (Y/N)? N
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: QuitKLJI: Select Item
F8: Q-FlashF10: Save & Exit Setup
Abandon all Data
<Y> <Enter>Setup Utility<N> <Esc>
BIOS- 43 -
GA-VM800PMC- 44 -
3-1
Xpress Install
Windows XP
(
Setup.exe )
Xpress Install
Xpress Install
1.Windows XPUSB2.0 Windows
Service Pack\\
"?"(
USB 2.0 )
2.NvidiaWindows 2000/XP
D:\ Chipset \ nVidia \ WinXP_2K \ Setup.exe (D)
- 45 -
3-2
3-3
GA-VM800PMC- 46 -
3-4
3-5
- 47 -
GA-VM800PMC- 48 -
4-1
()
4-1-1 EasyTune 5
EasyTune5 Microsoft Windows
1)2) C.I.A.
M.I.B.3)4)
/
1.Overclocking
2.C.I.A./C.I.A.2 and M.I.B./M.I.B.2C.I.A./2M.I.B./2
3.Smart-Fan
4.PC Health
5.GO
6."Easy Mode""Advance Mode"
7.CPU
8.LEDs
9.GIGABYTE Logo
10.HelpEasyTuneTM 5
11.EasyTuneTM 5
( )
( ) EasyTune 5
- 49 -
4-1-2 Xpress Recovery2
Xpress Recovery2(BACKUP)
(RESTORE)Microsoft
WinXP/2K/NT/98/MeDOS
NTFSFAT32FAT16PATASATA
IDE ControllerBackup
Xpress Recovery2<F9>
:
1. Intel x86 platform
2.64M bytes memory
3. VESA supported VGA cards
:
CD-ROM<F9>
BIOS"Advanced BIOS Feature"CD-ROM
"Boot from CD/DVD:"
Xpress Recovery2CD-ROM
Xpress Recovery2<F9>
.
.
Boot from CD/DVD:
Press any key to startup XpressRecovery2.....
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2006, Award Software, Inc.
VM800PMC D5
.
.
.
.
<DEL>:BIOS Setup/Q-Flash, <F9>: Xpress Recovery2, <F12>: Boot Menu
10/31/2006-P4M800Pro-823-6A7L6G0FC-00
Boot from CD/DVD:
<F9>: Xpress Recovery2
1.CD-ROMXpress Recovery2
<F9>
2.
3.
Xpress Recovery2
GA-VM800PMC- 50 -
Xpress Recovery2
1. RESTORE:
()
2. BACKUP:
3. REMOVE:
()
4. REBOOT:
:
1.Xpress Recovery
2. primary partitionXpress Recovery2
3. Xpress Recovery2
(:4G Bytes;)
4.Microsoft DOSWinXP/2000/NT/9x/
Me
5.USB
6.RAID/AHCI controller(class code:0104/0106)
7.
::
a. PATA IDE primary channel
b. PATA IDE secondary channel
c. SATA IDE channel 1
d. SATA IDE channel 2
e. SATA IDE channel 3
f.SATA IDE channel 4
:
1. Win2000 (128G Bytes)
"EnableBigLba.exe"
2.
3.GPL
4.nVidia RAID SATA IDE
BIOS
- 51 -
4-1-3 BIOS
Q-Flash
TM
Q-Flash
BIOSBIOS
TM
Q-Flash
DOSWindows Q-FlashTMQ-Flash
BIOSQ-FlashTM BIOS
TM
Q-Flash
BIOS
1.BIOS
2.BIOSBIOS(.Fxx8KNXPU.Fba)
3.DelBIOS
TM
Q-Flash
BIOSBIOS
F1F12F1F4F4F8
BIOS
BIOS
BIOS
BIOSQ-Flash
BIOSBIOSQ-Flash Dual BIOS
UltraQ-FlashBIOSFa3Fba
TM
BIOS
BIOS
BIOSBIOS
TM
BIOS
Q-FlashGA-8KNXP
TM
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2003, Award Software, Inc.
BIOSFa3
Intel i875P AGPset BIOS for 8KNXP Ultra Fa3
Check System Health OK , VCore = 1.5250
Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)
<CPUID : 0F27 Patch ID : 0027>
Memory Testing : 131072K OK
Memory Frequency 266 MHz in Single Channel
Primary Master : FUJITSU MPE3170AT ED-03-08
Primary Slave : None
Secondary Master : CREATIVEDVD-RM DVD1242E BC101
Secondary Slave : None
Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For
Xpress Recovery
08/07/2003-i875P-6A79BG03C-00
GA-VM800PMC- 52 -
TM
Q-Flash
1DelBIOSQ-Flash
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`MB Intelligent Tweaker(M.I.T.)
Main ROM Type/Size.............................SST 49LF003A512K
Backup ROM Type/Size.........................SST 49LF003A512K
Wide Range Protection Disable
Copy Main ROM Data to Backup
Enter : Run KL:Move ESC:Reset F10:Power Off
Dual BIOS Utility
Boot FromMain Bios
Auto RecoveryEnable
Are you sure to RESET ?
Halt On ErrorDisable
[Enter] to continure or [Esc] to abort...
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Load Main BIOS from Floppy
Load Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
1 ~ 4
BIOS
(Backup BIOS)
Fba
Award Modular BIOS v6.00PG, An Energy Star Ally
BIOS
Copyright (C) 1984-2003, Award Software, Inc.
Intel i875P AGPset BIOS for 8KNXP Ultra Fba
Check System Health OK , VCore = 1.5250
Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)
<CPUID : 0F27 Patch ID : 0027>
Memory Testing : 131072K OK
Memory Frequency 266 MHz in Single Channel
Primary Master : FUJITSU MPE3170AT ED-03-08
Primary Slave : None
Secondary Master : CREATIVEDVD-RM DVD1242E BC101
Secondary Slave : None
Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For
Xpress Recovery
09/23/2003-i875P-6A79BG03C-00
BIOS
- 55 -
6. DelBIOSLoad Optimized Defaults
EnterBIOSBIOS
BIOSBIOS
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`MB Intelligent Tweaker(M.I.T.)
ESC: QuitF3: Change Language
F8: Dual BIOS/Q-FlashF10: Save & Exit Setup
Load Fail-Safe Defaults (Y/N)? Y
Load Optimized Defaults
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Y
7. Save & Exit SetupCMOSBIOSBIOS
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`MB Intelligent Tweaker(M.I.T.)
ESC: QuitF3: Change Language
F8: Dual BIOS/Q-FlashF10: Save & Exit Setup
Save to CMOS and EXIT (Y/N)? Y
Save Data to CMOS
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Y
BIOSQ-Flash
Q-FlashBIOSBIOS
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
`MB Intelligent Tweaker(M.I.T.)
Intel 845GE AGPSet BIOS for 8GE800 F4
Check System Health OK
Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0)
<CPUID : 0F0A Patch ID : 0009>
Memory Testing : 122880K OK + 8192K Shared Memory
Press DEL to enter SETUP / Q-Flash
03/18/2003-I845GE-6A69YG01C-00
6. DelBIOSLoad Optimized Defaults
EnterBIOS67
BIOS
GA-VM800PMC- 58 -
TM
@BIOS
DOS@BIOS
@BIOSBIOS@BIOS
BIOSBIOS
1. @BIOS2. @BIOS
//GIGABYTE/@BIOS
@BIOS
3. @BIOS4. @BIOS
""
"Update New BIOS"
1.
I. InternetBIOS
a."Internet Update"
b."Update New BIOS"
c.@BIOS
d.
e.BIOS
II. InternetBIOS
a. "Internet Update"
b."Update New BIOS"
c." "All Files (*.*)"
d.BIOS
(VM800PMC.F1)
e.
- 59 -
III. BIOS
"Save Current BIOS" BIOS
IV. Flash ROM
"About this program"@BIOS
Flash ROM
2.
I. I ( )
BIOS
II. II BIOS
III. I @BIOS BIOS
BIOS II
BIOS
IV. BIOS
V.C.O.M.(Corporate Online Management)
GA-VM800PMC- 60 -
4-1-4Serial ATA
SATA
(1)SATA
(2)BIOSSATA
(3)RAID BIOSRAID
(4)SATA
(5)SATA
(a)SATA(SATA
RAID)
(b)
(c) Windows XP2000
(d)
(1)SATA
SATASATA
SATA(SATA
SATA0/SATA1)
( )
( )
( )
( )RAID
- 61 -
(2)BIOSSATA
BIOSSATA
1
BIOSPOST (Power-On Self Test)<Del>
BIOSCMOS SETUPRAIDIntegrated Peripherals
SATA ModeRAID(IDE)RAID
IDE (1)
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
OnChip IDE Channel 0[Enabled]
OnChip IDE Channel 1[Enabled]
VIA Onboard LAN[Enabled]
OnBoard LAN Boot ROM[Disabled]
OnChip Serial ATA[Enabled]
SATA Mode[RAID]
AC97 Audio[Auto]
USB 1.1 Controller[Enabled]
USB 2.0 Controller[Enabled]
USB Keyboard Support[Disabled]
USB Mouse Support[Disabled]
Legacy USB storage detect[Enabled]
Onboard Serial Port 1[3F8/IRQ4]
Onboard Serial Port 2[2F8/IRQ3]
Onboard Parallel Port[378/IRQ7]
Parallel Port Mode[SPP]
x EPP Mode SelectEPP1.7
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
First Boot Device[CDROM]
Second Boot Device[Hard Disk]
Third Boot Device[CDROM]
Password Check[Setup]
CPU Hyper-Threading[Enabled]
Limit CPUID Max. to 3[Disabled]
No-Execute Memory Protect[Enabled]
Virtualization Technology[Enabled]
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
View the serial number of
hard disk, it is useful for
identify same model disks
F1: View Array/disk Status
KK
LL
K ,
L : Move to next item
KK
LL
Enter : Confirm the selection
ESC : Exit
11
E.
<F1>
(12)
VIA Tech. VT8237 SATA RAID BIOS Ver 4.97
XX
X Create Array
XX
XX
X Delete Array
XX
XX
X Create/Delete Spare
XX
XX
X Select Boot Array
XX
XX
X Serial Number View
XX
Array NameArray ModeBlock Size(GB)Size(GB)
ARRAY 0Stripe64K223.58
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1: View Array/disk Status
KK
LL
K ,
L : Move to next item
KK
LL
Enter : Confirm the selection
ESC : Exit
12
GA-VM800PMC- 68 -
(4) SATA
SATASATA
SATA
DOS
1
MS-DOSD:\>
D:\>ENTER(13)
cd bootdrv
menu
( )
MS-
13
2
14
14CC)VIA 8237 Series ATA
( )
BootDrvMENU.exe(15)MS-DOS
14
15
- 69 -
14
(5)SATA
SATABIOS
Microsoft Windows 2000XPSATA(Microsoft
Windows XP)
1
Microsoft Windows XPPress
F6 if you need to install a 3rd party SCSI or RAID driver<F6>
(16)
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
16
2
SATA<S>(17)
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s)
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.