GIGABYTE GA-PICO3455 Users manual

GA-PICO3455

User's Manual

Rev. 1001

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product are recyclable and reusable. GIGABYTE works with you to protect the environment.

Copyright

© 2020 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS, drivers, or when looking for technical information.

Example:

Table of Contents

GA-PICO3455 Motherboard Layout.................................................................................		4
Chapter 1 Hardware Installation......................................................................................		5
1-1	Installation Precautions.....................................................................................	5
1-2	Product Specifications......................................................................................	6
1-3	Installing the Memory........................................................................................	7
1-4 Installing an Expansion Card............................................................................		7
1-5	Back Panel Connectors....................................................................................	8
1-6	Internal Connectors..........................................................................................	9
Chapter 2 BIOS Setup...................................................................................................		15
2-1	Startup Screen................................................................................................	15
2-2	Main................................................................................................................	16
2-3	Advanced........................................................................................................	17
2-4	Security...........................................................................................................	21
2-5	Boot................................................................................................................	23
2-6	Save & Exit.....................................................................................................	25
Chapter 3 Appendix.......................................................................................................		26
Drivers Installation.....................................................................................................		26
Regulatory Notices....................................................................................................		27
Contact Us.................................................................................................................		28

- 3 -

GA-PICO3455 Motherboard Layout

SATA3_0	GPIO

LAN

R_USB30

HDMI

DCIN_PWR

AUDIO F_PANEL	COMAB
CODEC (Note)			<![if ! IE]> <![endif]>WIFI
30	iTE®
			<![if ! IE]> <![endif]>M2
	Super I/O
Realtek®
GbE LAN
Intel® Apollo Lake	COM_PW	<![if ! IE]> <![endif]>SMBUS	F_USB
SoC J3455E (Note)
			SATA_PWR
	LCDVCC_MON
GA-PICO3455	M_BIOS		<![if ! IE]> <![endif]>MSATA MPCIE

BAT

TPM IC

HS_1A

SODIMM_1 (Note)

	BAT
LVDS	FPD

(Note) This chip/connector is on the back of the motherboard.

Box Contents

55	GA-PICO3455 motherboard	55	Two SATA cables
55	Motherboard driver disc	55	One SATA power cable
55	One serial port cable	55	One USB cable
55	One Audio cable	55	One heatsink

*The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice.

-4 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures:

•• Prior to installation, make sure the chassis is suitable for the motherboard.

•• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or warranty sticker provided by your dealer. These stickers are required for warranty validation.

•• Always remove the AC power by unplugging the power cord from the power outlet before installing or removing the motherboard or other hardware components.

•• When connecting hardware components to the internal connectors on the motherboard, make sure they are connected tightly and securely.

•• When handling the motherboard, avoid touching any metal leads or connectors.

•• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep your hands dry and first touch a metal object to eliminate static electricity.

•• Prior to installing the motherboard, please have it on top of an antistatic pad or within an electrostatic shielding container.

•• Before connecting or unplugging the power supply cable from the motherboard, make sure the power supply has been turned off.

•• Before turning on the power, make sure the power supply voltage has been set according to the local voltage standard.

•• Before using the product, please verify that all cables and power connectors of your hardware components are connected.

•• To prevent damage to the motherboard, do not allow screws to come in contact with the motherboard circuit or its components.

•• Make sure there are no leftover screws or metal components placed on the motherboard or within the computer casing.

•• Do not place the computer system on an uneven surface.

•• Do not place the computer system in a high-temperature or wet environment.

•• Turning on the computer power during the installation process can lead to damage to system components as well as physical harm to the user.

•• If you are uncertain about any installation steps or have a problem related to the use of the product, please consult a certified computer technician.

•• If you use an adapter, extension power cable, or power strip, ensure to consult with its installation and/or grounding instructions.

- 5 -

1-2	Product Specifications
	CPU		Built in with an Intel® Quad-Core Celeron® J3455E SoC (2.3 GHz)
			* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage
			to these components.
			2 MB Cache
	Memory		1 x DDR3L SO-DIMM socket supporting up to 8 GB of system memory
			Support for DDR3L 1866/1600/1333 MHz memory module
			(Go to GIGABYTE's website for the latest supported memory speeds and memory
			modules.)
	Onboard		Integrated in the SoC:
	Graphics		- 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
			Maximum shared memory of 512 MB
	Audio		Realtek® ALC887codec
		High Definition Audio
			2-channel
	LAN		Realtek® GbE LAN chip (1 Gbit/100 Mbit)
	Expansion Slots		1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
			1 x full size Mini PCIe slot (MSATA_MPCIE)
			* The MSATA_MPCIE slot can also be used as an MSATA connector.
	Storage Interface		Integrated in the SoC:
			- 1 x SATA 6Gb/s connectors
			- 1 x MSATA connector (MSATA_MPCIE)
	USB		Integrated in the SoC:
			- 2 x USB 3.0/2.0 ports on the back panel
			- 2 x USB 2.0/1.1 ports available through the internal USB headers
	Internal		1 x SATA 6Gb/s connector
	Connectors		1 x SATA power connector
			1 x front panel header
			1 x flat panel display header
			1 x front panel audio header
			1 x USB 2.0/1.1 header
			1 x serial port header
			1 x serial port power select jumper (COM_PW)
			1 x LCDVCC/MON header (LCDVCC_MON)
			1 x LVDS header
			1 x GPIO header
			1 x SMBUS
			1 x battery cable header
	Back Panel		1 x DC In power jack
	Connectors		1 x HDMI port
			2 x USB 3.0/2.0 ports
			1 x RJ-45 port

- 6 -

I/O Controller	iTE® I/O Controller Chip
Hardware		Voltage detection
Monitor		Temperature detection
BIOS	1 x 128 Mbit flash
	Use of licensed AMI UEFI BIOS
	PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for Xpress InstallSupport for @BIOS

Support for APP Center

*Available applications in APP Center may vary by motherboard model. Supported functionsofeachapplicationmayalsovarydependingonmotherboardspecifications

	Bundled	Norton® Internet Security (OEM version)
	Software
	Operating	Support for Windows 10 64-bit
	System
	Form Factor	Pico-ITX Form Factor; 10.0cm x 7.2cm

*GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice.

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•• Make sure that the motherboard supports the memory.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.

•• Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction.

1-4 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•• Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.

•• Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage.

Please visit GIGABYTE's website	Please visit the Support\Utility List
for support lists of memory modules,	page on GIGABYTE's website to
and SSDs.	download the latest version of apps.
- 7 -

1-5 Back Panel Connectors

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following describes the states of the LAN port LEDs.

Connection/Speed LED Activity LED Connection/Speed LED:

Activity LED:

State

Description

State

Description

Orange

1 Gbps data rate

Blinking

Data transmission or receiving is occurring

Green

100 Mbps data rate

Off

No data transmission or receiving is occurring

Off

10 Mbps data rate

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices.

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is 3840x2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The item name may differ depending on your operating system.)

DC In Power Jack

Connect the DC power to this port. This port supports 12V power.

•• When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard.

•• When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector.

- 8 -

1-6 Internal Connectors

1

6

4

10

9

	11	5
		2
	7	12

			3
	13		8
1)	SATA3_0	8)	FPD
2)	SATA_PWR	9)	GPIO
3)	BAT	10)	COMAB
4)	F_PANEL	11)	COM_PW
5)	F_USB	12)	SMBUS
6)	AUDIO	13)	LVDS
7)	LCDVCC_MON

Read the following guidelines before connecting external devices:

•• First make sure your devices are compliant with the connectors you wish to connect.

•• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices.

•• After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard.

- 9 -