Gigabyte GA-7VM User Manual

FCC Compliance Statement:

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

This equipment has been tested and found to
comply with limits for a Class B digital device ,

Responsible Party Name: G.B.T. INC.

Phone/Fax No: [phone]/ [phone]

hereby declares that the product

Product Name:

Model Number:

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a ),
Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, including
that may cause undesired operation.

Representative Person's Name: ERIC LU

Signature:

Address: 18305 Valley Blvd., Suite#A

Mother Board

Date: Mar. 3, 2000

LA Puent, CA 91744

GA-7VM

Er ic Lu

pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or

television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected

-Consult the dealer or an experienced radio/television technician for
additional suggestions

You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

( description of the apparatus, system, installation to which it refers)

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

Limits and methods of measurement

EN 55011

of radio disturbance char ac teristics of

industrial, scient ific and medical (ISM electrical equipment “ Harmonics”
high frequency equipment

Limits and methods of measurement

EN55013

of radio disturbance char ac teristics of
broadcast receivers and associated electrical equi pment “Voltage fluctuations”
equipment

Limits and methods of measurement

EN 55014

of radio disturbance char ac teristics of
portable tools and similar electric al

apparatus Residual, commer c ial and light indust r y

EN 55015

of radio disturbance char ac teristics of Industrial environment
fluorescent lam ps and luminaries

EN 55020

broadcast receivers and associated Industrial environment
equipment

EN 55022

of radio disturbance char ac teristics of appliances tools and similar apparatus
information technology equipment

DIN VDE 0855
part 10
part 12

household electrical appliances,

Limits and methods of measurement

Immunity from radio i nterference of

Limits and methods of measurement

Cabled distribution systems; Equipment
for receiving and/or
sound and television signals

distribution

declare that the product

from power systems (UPS)

Mother Board

GA-7VM

is in conformity with

EN 61000-3-2*

EN60555-2

EN61000-3-3*
EN60555-3

EN 50081-1

EN 50082-1

EN 55081-2

EN 55082-2

ENV 55104

EN 50091- 2

Disturbances in supply systems caused

by household appliances and similar

Disturbances in supply systems caused

by household appliances and similar

Generic emission standard Par t 1:

Residual, commer c ial and light indust r y

Generic immunity standard Part 1:

Generic emission standard Par t 2:

Generic immunity standard Part 2:

Immunity requirem ents for household

EMC requirements for uninterruptible

CE marking

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standard s in accordance with LVD 73/23 EEC

Safety requirements for mains operat ed

EN 60065

electronic and related apparatus for including elec trical business equipment
household and similar general use

Safety of household and similar

EN 60335

electrical appl iances uninterruptible power system s (UPS )

Signature

Date : Mar. 3, 2000 Name : Rex Lin

(Stamp)

Manufacturer/Importer

(EC conformity marking)

Safety for information technology equi pment

EN 60950

General and Safety requirements for

EN 50091-1

:

Rex Lin

7VM

AMD

TM

Athlon AGP Motherboard

USER'S MANUAL

AMDTM Athlon Processor Motherboard

REV. 1.1 Fourth Edition

R-11-04-000425

How this manual is organized

This manual is divided into the following sections:

1) Revision List

2) Item Checklist

3) Features

4) Hardware Setup

5) Performance & Block Diagram

6) Suspend to RAM

7) BIOS Setup

8) Appendix

Manual revision information
Product item list
Product information & specification
Instructions on setting up the motherboard
Product Performance & Block Diagram
Instructions STR installation
Instructions on setting up the BIOS

software
General reference

Table Of Content

Revision History P.1
Item Checklist P.2
Summary of Features P.3
7VM Motherboard Layout P.5
Page index for CPU Speed Setup / Connectors / Panel and Jumper Definition P.6
Performance List P.22
Block diagram P.23
Suspend to RAM Installation P.24
Memory Installation P.30
Page index for BIOS Setup P.31
Appendix P.61

7VM Motherboard

Revision History

Revision Revision Note Date

1.1 Initial release of the 7VM motherboard user’s manual. Mar. 2000

1.1 Second release of the 7VM motherboard user’s manual. Mar. 2000

1.1 Third release of the 7VM motherboard user’s manual. Mar. 2000

1.1 Fourth release of the 7VM motherboard user’s manual. Apr. 2000

The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information contained herein.
Third-party brands and names are the property of their respective owners.

Apr. 25, 2000 Taipei, Taiwan, R.O.C

1

Item Checklist

Item Checklist

;

The 7VM Motherboard

;

Cable for IDE / Floppy device

;

Diskettes or CD (TUCD) for motherboard utilities

;

7VM User’s Manual

2

7VM Motherboard

Summary Of Features

y

Form factor
CPU

Chipset Apollo KX133 ,consisting of:

Clock Generator
Memory

I/O Control
Slots

On-Board IDE

On-Board
Peripherals

Hardware Monitor
(Optional)

To be continued…

24.7 cm x 21.1 cm Micro ATX SIZE form factor, 4 layers PCB.

y
y
y

y
y

Athlon(

AMD

512 KB 2nd cache in CPU Module

K7) Slot A Processor

Supports 500MHz ~ 1GHz and faster
VIA8371 Memory/AGP/PCI Controller(PAC)

VT82C686A PCI Super-I/O Integrated Peripheral

Controller (PSIPC)

y

Supports 100~143MHz

y

3 168-pin DIMM Sockets

y

Supports SDRAM up to 1.5GB

y

Supports only 3.3V SDRAM DIMM, PC-133 supported

y

VT82C686A

y

1 AGP (Accelerated Graphics Port) slot

AGP 66 / 133 MHz, 3.3V/1.5V device support

-

y

3 32-bit Master PCI Bus slots

y

1 AMR Slot

y

An IDE controller on the VT82C686A PCI chipset
provides IDE HDD/ CD-ROM with PIO, Bus Master ,
Ultra DMA/33, and ATA 66 Operation modes

y

Can connect up to four IDE devices

y

1 Floppy port supports 2 FDD with 360K, 720K,1.2M,

1.44M and 2.88M bytes

y

1 Parallel port supports SPP/EPP/ECP mode

y

2 Serial Ports (COM 1 & COM 2)

y

4 USB ports

y

1 IrDA connector for Fast IrDA

y

CPU/Power Supply/Panel Fan Revolution detect

y

System Voltage Detect

y

CPU Overheat Warning

y

Display Actual Current Voltage

3

PS/2 Connector
BIOS

Additional Features

Summary Of Features

y

PS/2 Keyboard interface and PS/2 Mouse interface

y

Licensed AMI BIOS, 2M bit FLASH RAM

y

Internal/External Modem Wake up

y

STR (Suspend-To-RAM)

y

LAN Wake up

y

System after AC back

4

7VM Motherboard

7VM Motherboard Layout

PS/2

USB

JP5

COM 1

J10

ATX POWER

J5

SW4

JP4

FDD1

COM 2

AC97

J12

J11

JP7

LPT

J8

GAME & AUDIO

PCI 1

PCI 2

PCI 3

AMR 1

AGP 1

J4

CPU

JP6

J3

VT8371

7VM

USB2

VT82C

686A

JP9
JP8

DIMM 1

DIMM 2

J2

DIMM 3

BAT1

BIOS

IDE2

IDE1

LED1

JP3

JP2

J6

J1

5

7VM Motherboard Layout



Page index for CPU Speed Setup / Connectors / Panel and Jumper
Definition
CPU Speed Setup P.7
Connectors P.8
GAME & Audio Port P.8
COM 1 / COM 2 / LPT Port P.8
USB Connector P.9
PS/2 Keyboard & PS/2 Mouse Connector P.9
J10 (Power FAN) P.10
J5 (CPU FAN) P.10
J6 (System FAN) P.11
ATX Power P.11
Floppy Port P.12
IDE 1(Primary) / IDE 2(Secondary) Prot P.12
USB2 (USB Port) P.13
IR P.13
JP3 (STR LED Connector) & LED1(DRAM LED) P.14
J3 (Modem Wake Up) P.14
J4 (LAN Wake Up) P.15
J12 (TEL) P.15
J11 (AUX_IN) P.16
J8 (CD Audio Line In) P.16
Panel and Jumper Definition P.17
J2 (2x11 PINs Jumper) P.17
JP2 (BIOS Write Protection) P.18
JP6 (Front Panel USB Device Wake Up Selection)[Optional] P.18
JP5 (Rear Panel USB Device Wake Up Selection)[Optional] P.19
JP4 (STR Enable) P.19
JP7/JP8/JP9 (Onboard AC97 & AMR Select) P.20
JP7 (AMR Primary / Secondary Select) P.20
BAT1 (Battery) P.21

Page

6

7VM Motherboard

CPU Speed Setup

The system bus speed is selectable at 100 ~143MHz. The user can select the system bus speed
by DIP switch

Set System Bus Speed
SW4:

SW4

.

4 3 2 1 CPU PCI Spectrum
X X X X 133.3 33.3 5%
O X X X 100.2 33 5%
X O X O 110 36.7 X
O X X O 115 38.3 X
O O X O 120 30 X
X X O X 133.3 33.3 X
O X O X 100.2 33.3 X
X X O O 124 31 X
X O O O 129 32.3 X
O X O O 138 34.5 X
O O O O 143 35.8 X

O : ON, X : OFF

7

Connectors

GAME & Audio Port

Connectors

COM 1 / COM 2 / LPT Port

GAME Port

Line Out

MIC

Line In

LPT PORT

COM 1 COM 2

8

7VM Motherboard

USB Connector

8

6

7

5

4

1

2 3

PS/2 Keyboard & PS/2 Mouse Connector

Pin No. Definition

1 USB V0
2 USB D0­3 USB D0+
4 GND
5 USB V1
6 USB D1­7 USB D1+
8 GND

PS/2 Mouse

PS/2 Mouse/ Keyboard

Pin No. Definition

6

4

2

5

3

1

PS/2 Keyboard

9

1 Data
2 NC
3 GND
4 VCC(+5V)
5 Clock
6 NC

J10: Power FAN

Connectors

J5: CPU FAN

1

1

Pin No. Definition

1 GND
2 +12V
3 SENSE

Pin No. Definition

1 GND
2 +12V
3 SENSE

10

7VM Motherboard

J6: System FAN

ATX Power

Pin No. Definition

1

1 GND
2 +12V
3 SENSE

1

11

10

20

Pin No. Definition

3,5,7,13,15-17 GND

1,2,11 3.3V

4,6,19,20 VCC

10 +12V
12 -12V
18 -5V

8 Power Good
9 5V SB stand by+5V

14 PS-ON(Soft On/Off)

11

Floppy Port

IDE1 (Primary) , IDE2 (Secondary) Port

Connectors

RED LINE

IDE 1

RED LINE

IDE 2

12

7VM Motherboard

USB2 : USB Port

IR : Infrared Connector

8 5

1 4

Pin No. Definition

1 VCC
2

USB D0−
3 USB D0+
4 GND
5 VCC
6

USB D1−
7 USB D1+
8 GND

1

Pin No. Definition

1 VCC (+5V)
2 NC
3 IR Data Input
4 GND
5 IR Data Output

13

JP3 : STR LED Connector & LED1 (DRAM LED)

LED1

+

(DRAM LED)

1

JP3

STR LED C onn ector Ex ternal.

J3 : Modem Wake Up (Internal Modem Card Wake Up)

1

Connectors

Pin No . Definition

1 Signal
2 GND

14

7VM Motherboard

J4 : LAN Wake Up

1

Pin No . Definition

1 +5V SB
2 GND
3 Signal

J12 TEL: The connector is for Modem with internal voice connector

1

Pin No . Definition

1 Signal-In
2 GND
3 GND
4 Signal-Out

15

J11:AUX_IN

Connectors

J8 : CD Audio Line In

1

Pin No . Definition

1 AUX-L
2 GND
3 GND
4 AUX-R

1

Pin No . Definition

1 CD-L
2 GND
3 GND
4 CD-R

16