Gigabyte 6BNZ User Manual
Table of Contents
1
TABLE OF CONTENTS
1. INTRODUCTION
1.1. PREFACE..........................................................................................................1-1
1.2. KEY FEATURES...............................................................................................1-1
1.3. PERFORMANCE LIST......................................................................................1-2
1.4. BLOCK DIAGRAM ...........................................................................................1-3
1.5. INTRODUCE THE Pentium II/III Processor ..................................................1-4
1.6. What is AGP? ....................................................................................................1-5
2. SPECIFICATION
2.1. HARDWARE.....................................................................................................2-1
2.2. SOFTWARE......................................................................................................2-3
2.3. ENVIRONMENT................................................................................................2-3
3. HARDWARE INSTALLATION
3.1. UNPACKING.....................................................................................................3-1
3.2. MAINBOARD LAYOUT.....................................................................................3-2
3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS .............................3-2
3.4. CPU SPEED SETUP ........................................................................................3-7
3.5. DRAM INSTALLATION.....................................................................................3-8
3.6. CMOS RTC & ISA CFG CMOS SRAM.............................................................3-8
3.7. VGA Monitor INSTALLATION...........................................................................3-8
6BNZ
2
3.8. HARDWARE RESET SWITCH CONNECTOR INSTALLATION....................3-8
3.9. POWER LED CONNECTOR INSTALLATION ................................................3-9
3.10. IDE & ATAPI DEVICE INSTALLATION..........................................................3-9
3.11. PERIPHERAL DEVICE INSTALLATION........................................................3-9
3.12. SPEAKER CONNECTOR .............................................................................3-9
3.13. KEYBOARD & PS/2 MOUSE INSTALLATION..............................................3-9
4. BIOS CONFIGURATION
4.1. ENTERING SETUP ..........................................................................................4-1
4.2. CONTROL KEYS..............................................................................................4-1
4.3. GETTING HELP................................................................................................4-2
4.3.1. Main Menu.............................................................................................4-2
4.3.2. Status Page Setup Menu / Option Page Setup Menu............................4-2
4.4. THE MAIN MENU..............................................................................................4-2
4.5. STANDARD CMOS SETUP MENU .................................................................4-4
4.6. BIOS FEATURES SETUP................................................................................4-8
4.7. CHIPSET FEATURES SETUP.........................................................................4-13
4.8. POWER MANAGEMENT SETUP....................................................................4-17
4.9. PNP/PCI CONFIGURATION...........................................................................4-21
4.10. LOAD BIOS DEFAULTS.................................................................................4-23
4.11. LOAD PERFORMANCE DEFAULTS.............................................................4-24
4.12. INTEGRATED PERIPHERALS......................................................................4-25
Table of Contents
3
4.13. SUPERVISOR / USER PASSWORD.............................................................4-30
4.14. IDE HDD AUTO DETECTION........................................................................4-31
4.15. SAVE & EXIT SETUP.....................................................................................4-32
4.16. EXIT WITHOUT SAVING...............................................................................4-33
APPENDIX A: ATi Rage Pro SPECIFICATION
A.1. KEY FEATURES..............................................................................................A-1
A.2. Resolutions and Color Palette Table.................................................................A-1
A.3. Installation Notes for Windows 95 Display Driver.............................................A-3
A.4. Installation Notes for Software MPEG for Windows 95....................................A-4
A.5. VESA Support..................................................................................................A-5
A.6. Installation Notes for Windows 3.1...................................................................A-5
A.7. Installation Notes for Software MPEG for Windows 3.1x .................................A-6
A.8. Installation Notes for AutoDesk products..........................................................A-7
A.9. Installation Notes for OS/2................................................................................A-9
A.10. Installation Notes for Windows NT 3.51 and 4.0............................................A-12
A.11. DMI support....................................................................................................A-13
A.12. Reporting Problems........................................................................................A-13
6BNZ
1-1
1. INTRODUCTION
1.1. PREFACE
Welcome to use the 6BNZ motherboard. It is a Pentium II / III / Celeron
Processor based PC / AT compatible system with AGP / PCI / ISA Bus, and
has been designed to be the fastest PC / AT system. There are some new
features allow you to operate the system with just the performance you want.
This manual also explains how to install the motherboard for operation, and
how to set up your CMOS CONFIGURATION with BIOS SETUP program.
1.2. KEY FEATURES
q Intel Pentium
II / III / Celeron Processor based PC / AT compatible
mainboard.
q Slot 1 supports Pentium
II / III / Celeron processor running at 233-633
MHz.
q Intel 440BX chipset, Supports SDRAM / Ultra DMA/33 IDE / Keyboard and
PS/2 Mouse Power On / ACPI features.
q Built-in AGP ATi 3D RAGE PRO 3D graphics acceleration chip.
q Built-in YAMAHA 715E audio chip.
q Built-in INTEL SB82558B LAN chip.
q Supports 3xDIMMs using 3.3V SDRAM DIMM module.
q Supports 16 MB - 768 MB SDRAM memory on board.
q Supports ECC or Non-ECC type DRAM module.
q 2xPCI Bus slots, 2xISA Bus slots.
q Supports 2 channels Ultra DMA/33 IDE ports for 4 IDE Devices.
q Supports 2xCOM (16550), 1xLPT (EPP / ECP), 1x Floppy port.
q Supports 2xUSB ports, 1xPS/2 Mouse / Keyboard.
q Licensed AWARD BIOS, 2Mbits FLASH RAM.
q 28.2 cm x 21.6 cm NLX SIZE form factor, 4 layers PCB.
Introduction
1-2
1.3. PERFORMANCE LIST
The following performance data list is the testing results of some popular
benchmark testing programs.
These data are just referred by users, and there is no responsibility for
different testing data values gotten by users. (The different Hardware &
Software configuration will result in different benchmark testing results.)
• CPU
Pentium II processor
• DRAM (128 × 2) MB SDRAM (SEC KM48S8030BT-GH)
• CACHE SIZE 512 KB included in CPU
• DISPLAY ATi RAGE Pro AGP Display Onboard (4MB SGRAM)
• STORAGE Onboard IDE (IBM DHEA-36481)
• O.S. Windows® NT 4.0
• DRIVER Display Driver at 1024 x 768 x 256 colors x 75Hz.
Triones Bus Master IDE Driver 3.70
Intel Pentium II
Processor
266MHz (66× 4) 350MHz (100× 3.5)
Winbench98
CPU mark32
719
862
FPU Winmark
1380 1800
Business Disk
1840 1900
Hi-End Disk
4370 4620
Business Graphics
156 195
Hi-End Graphics
171 219
Winstone98
Business
29.4
34.1
6BNZ
1-3
Hi-End
32.8 37.4
1.4. BLOCK DIAGRAM
48MHz
3.3V SDRAM
DIMM Sockets
14.318MHz
Ultra DMA/33
IDE Ports
IDE Bus
PCI Bus
ISA Bus
AGP Bus
LPT Port
Keyboard
Floppy Port
COM Ports
DRAM Bus
PS/2 Mouse
USB Bus
USB Ports
14.318MHz
48MHz
14.318MHz
I/O
CHIPSET
83977TF
SLOT1
Host Bus
INTEL
82443BX
CHIPSET
Clock Gen
Buffer
PIIX4
82371EB
CHIPSET
Clock Gen
66MHz
66/100
MHz
66/100
MHz
66/100MHz
33 MHz
66/100MHz
100MHz
ATi
RAGE PRO
SGRAM
14.318MHz
Introduction
1-4
1.5. INTRODUCE THE Pentium II / III Processor
Figure 1: Universal Retention Mechanism & attach Mount
Figure 2:OEM Pentium II Processor
Loading...