Gibson Innovations B8 Users manual

Download

User manual

www.philips.com/support

B8_37_CD-UM_EN.indd 1 3/03/2017 11:37:38 AM

B8_37_CD-UM_EN.indd 2 3/03/2017 11:37:38 AM

Contents

1 Important 2

Important safety instructions 2 Care for your product 3 Care of the environment 3 Help and support 4

2 Your product 4

Main unit 4 Remote control 5 Connectors 6 Wireless subwoofer 6

3 Connect 7

Placement 7 Pair up with the subwoofer 8 Connect audio from TV 8 Connect audio from other devices 10 Connect digital devices through

HDMI 11

4 Use your product 11

Set clock 11 Auto standby 12 Adjust the volume 12 Dolby Atmos® 12 Choose your sound 13 Play audio through Bluetooth 14 Connect Bluetooth via NFC 15 MP3 player 15 USB storage devices 15 Set display brightness 16 Apply factory settings 16

7 Product specications 18

8 Trouble shooting 19

9 Notice 21

Notice of compliance 21

5 Update software 17

Check software version 17 Update software via USB 17

6 Wall mount 18

1EN

B8_37_CD-UM_EN.indd 1 3/03/2017 11:37:38 AM

1 Important

Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

Important safety instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water

• Clean only with dry cloth.

• Do not block any ventilation

openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories

specied by the manufacturer.

• Use only with the cart,

stand, tripod, bracket or table specied by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during

lightning storm or when unused for long periods of time.

• Refer all servicing to qualied

service personnel. Servicing is required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Battery usage CAUTION - To

prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, + and - as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

• The batteries shall not be exposed to excessive heat such as sunshine, re or the like.

• Perchlorate Material - special handling may apply. See www. dtsc.ca.gov/hazardouswaste/ perchlorate.

• The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death.

2 EN

B8_37_CD-UM_EN.indd 2 3/03/2017 11:37:39 AM

Severe internal burns can occur within two hours of ingestion.

• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.

• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.

• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.

• Apparatus shall not be exposed to

dripping or splashing.

•

Do not place any sources of danger on the apparatus (for example. liquid

lled objects, lighted candles).

• This apparatus may contain lead

and mercury. Dispose according to local, State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips. com.

•

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• Do not place this apparatus on the

furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death.

• This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to

leave a space of 7.8 inches (20cm) or more around this apparatus.

Class II equipment symbol

This symbol indicates that the unit has a double insulation system.

Know these safety symbols

This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an

electrical shock. For the safety of everyone in your household, please do not remove product covering.

The ‘exclamation point’ calls

attention to features for which

you should read the enclosed

literature closely to prevent operating and maintenance problems.

WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured with high quality

3EN

B8_37_CD-UM_EN.indd 3 3/03/2017 11:37:40 AM

materials and components, which can

be recycled and reused. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com This product contains batteries:

• Dispose of batteries properly. Do not incinerate. Batteries may explode if overheated.

• Do not wrap in metal or aluminum foil. Wrap in newspaper before discarding.

• It is suggested that you contact your local town or city to determine proper battery redemption site(s) in your area.

• Please visit www.call2recycle.org for additional information on a recycling center in your area for rechargeable batteries.

Help and support

2 Your product

Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips oers(e.g.

notication of product software upgrade), register your product at www.philips.com/welcome.

Main unit

This section includes an overview of the main unit.

For extensive online support, visit www.philips.com/support to:

• download the user manual and the quick start guide

• watch video tutorials (available only for selected models)

• nd answers to frequently answered questions (FAQs)

• email us a question

• chat with our support

representative.

Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can nd this information on the back or bottom of your product.

4 EN

B8_37_CD-UM_EN.indd 4 3/03/2017 11:37:40 AM

• Switch this product on or to standby.

• When this product is in standby, the standby indicator turns red.

Select an input source for this product.

c +/- (Volume)

Increase or decrease volume.

d Display panel e NFC tag

Tap the NFC-enabled device on the tag for Bluetooth connection.

Remote control

This section includes an overview of the remote control.

Switch this product on or to standby.

b Source buttons

• HDMI ARC: Switch your source to HDMI ARC connection.

• HDMI 1: Switch your source to the HDMI IN 1 connection.

• HDMI 2: Switch your source to the HDMI IN 2 connection.

• COAX: Switch your audio source to the coaxial connection.

• OPTICAL: Switch your audio source to the optical connection.

• AUDIO IN: Toggle audio source between AUX and AUDIO IN connection (3.5mm jack).

• USB: Switch to USB mode.

• : Switch to Bluetooth mode.

• : Select an input source for

this product.

c /

Skip to the previous or next track in USB and Bluetooth mode.

Start, pause or resume play in USB and Bluetooth mode.

e BASS +/-

Increase or decrease bass.

f Volume control

• +/-: Increase or decrease volume.

• : Mute or restore volume.

g Sound mode control

• SMART: Automatically select a predened sound mode to suit your video or music.

• MUSIC: Select stereo sound mode.

• VOICE: Select voice clarity sound mode.

• MOVIE: Select surround sound mode.

h HEIGHT +/-

Select a height eect level for Dolby Atmos.

5EN

B8_37_CD-UM_EN.indd 5 3/03/2017 11:37:41 AM

i AUDIO SYNC +/-

Increase or decrease audio delay.

j NIGHT

Turn night mode on or o.

k DIM

Set the brightness of the display panel for this product.

Set clock or display clock.

m AUTO VOL.

Turn auto volume on or o.

n TREBLE +/-

Increase or decrease treble.

Connectors

This section includes an overview of the connectors available on this product.

d DC IN

Connect to the power supply.

e AUDIO IN

Connect to an audio output on a device via AUDIO IN or AUX source (by pressing repeatedly AUDIO IN on the remote control).

f OPTICAL IN

Connect to an optical audio output on the TV or a digital device.

g COAXIAL IN

Connect to a coaxial audio output on the TV or a digital device.

Wireless subwoofer

This product comes with a wireless subwoofer.

a HDMI OUT (ARC) - TO TV

Connect to the HDMI input on the TV.

b HDMI IN1 / HDMI IN2

Connect to the HDMI output on a digital device.

c USB

• Connect to a USB storage device for audio media play.

• Upgrade software of this product.

6 EN

a Connect (connect)

Press to to enter the pairing mode for the subwoofer.

b Subwoofer indicator

• When the power is turned on, the indicator lights up.

B8_37_CD-UM_EN.indd 6 3/03/2017 11:37:41 AM

• During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly.

• When the pairing succeeds, the indicator lights up white.

• When the pairing fails, the indicator blinks white slowly.

• When wireless connection is disconnected for 1 minute, the indicator turns o.

c AC MAINS~

Connect to the power supply.

3 Connect

This section helps you connect this product to a TV and other devices. For information about the basic connections of this product and accessories, see the quick start guide.

Note

• For identication and supply ratings, see

the type plate at the back or bottom of the product.

• Before you make or change any

connections, make sure that all devices are disconnected from the power outlet.

Placement

Place the subwoofer at least 1 meter (3 feet) away from the main unit, and 10 centimeters (4 inches) away from the wall. For best results, place your subwoofer as shown below.

10cm/4”

1m/3ft

7EN

B8_37_CD-UM_EN.indd 7 3/03/2017 11:37:41 AM

Pair up with the subwoofer

The wireless subwoofer automatically pairs up with the main unit for wireless connection when you turn on the main unit and the subwoofer. If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

1 Turn on the main unit and the

subwoofer.

» If the connection to the main

unit is lost, the indicator on the subwoofer blinks white slowly.

2 Press the CONNECT (connect)

button on the subwoofer to enter the pairing mode.

» The indicator on the subwoofer

blinks white quickly.

3 In HDMI ARC mode (press HDMI

ARC), on the remote control, within

six seconds, press twice then Volume + once, and then hold down BASS +.

» If the pairing succeeds, the

indicator on the subwoofer lights up white.

» If the pairing fails, the indicator

on the subwoofer blinks white slowly.

4 If the pairing fails, repeat the steps

above.

Note

• If the wireless dis-connection or pairing up

lasts 1 minute, the subwoofer automatically switches to standby and the LED on the subwoofer turns o.

Connect audio from TV

Connect this product to a TV. You can listen to audio from TV programs through the speakers of this product.

Option 1: Connect to TV through HDMI (ARC)

Best quality audio

This product supports HDMI with Audio Return Channel (ARC). With the ARC feature, you can hear the TV audio through this product by using a single HDMI cable.

What you need

• A High Speed HDMI Cable.

• Your TV supports both HDMI ARC

and HDMI-CEC (see the TV user manual for details).

• For some TV models, enable the external speaker output from the TV setting menu (see the TV user manual for details).

1 Using a High Speed HDMI cable,

connect the HDMI OUT (ARC) - TO TV connector on this product to the HDMI ARC connector on the TV.

• The HDMI ARC connector on the

TV might be labeled dierently. For details, see the TV user manual.

2 On your TV, turn on HDMI-CEC

operations.

8 EN

B8_37_CD-UM_EN.indd 8 3/03/2017 11:37:42 AM

• For HDMI-CEC issues on your TV, see the TV user manual to make sure that the HDMI-CEC setup is correct, or contact the TV manufacturer if needed.

3 Press HDMI ARC on the remote

control of this product to enable the HDMI ARC connection.

Note

• 100% interoperability with all HDMI-CEC

devices is not guaranteed.

• If your TV is not HDMI ARC compliant,

connect an audio cable to hear the TV audio through this product.

Option 2: Connect to TV through optical cable

Best quality audio

Option 3: Connect to TV through coaxial cable

Best quality audio

1 Using a coaxial cable, connect

the COAXIAL IN connector on this product to the coaxial output on the TV.

• The digital coaxial output on the

TV might be labeled COAXIAL/

DIGITAL OUT or DIGITAL AUDIO OUT.

2 Press COAX on the remote control

of this product to enable the coaxial connection.

Option 4: Connect to TV through analog audio cables

Basic quality audio

1 Using an optical cable, connect

the OPTICAL IN connector on this product to the optical output on the TV.

• The digital optical output on the TV might be labeled OPTICAL

OUT, SPDIF or SPDIF OUT.

2 Press OPTICAL on the remote

control of this product to enable the optical connection.

B8_37_CD-UM_EN.indd 9 3/03/2017 11:37:42 AM

1 Using an analog cable, connect

the AUDIO IN (3.5mm jack) on this product to the analog audio output (red and white) on the TV.

• The analog audio output on the external device might be labeled AUDIO OUT.

AUDIO OUT

9EN

2 Press repeatedly AUDIO IN on

the remote control until AUX is displayed on the display panel.

Connect audio from other devices

You may also play audio from other devices through the speakers of this product.

Option 1: Connect to other device through optical cable

Best quality audio

Option 2: Connect to other device through coaxial cable

Best quality audio

1 Using a coaxial cable, connect

the COAXIAL connector on this product to the coaxial output on the external device.

• The digital coaxial output on the external device might be labeled COAXIAL/DIGITAL OUT or DIGITAL AUDIO OUT.

2 Press COAX on the remote control

of this product to enable the coaxial connection..

1 Using an optical cable, connect

the OPTICAL IN connector on this product to the optical output on the external device.

• The digital optical output on the external device might be labeled

OPTICAL OUT, SPDIF or SPDIF OUT.

2 Press OPTICAL on the remote

control of this product to enable the optical connection.

Option 3: Connect to other device through analog audio cables

Basic quality audio

AUDIO OUT

1 Using an analog cable, connect

the AUDIO IN (3.5mm jack) on this product to the analog audio output (red and white) on the external device.

10 EN

B8_37_CD-UM_EN.indd 10 3/03/2017 11:37:43 AM

• The analog audio output on the external device might be labeled

AUDIO OUT.

2 Press repeatedly AUDIO IN on

the remote control until AUX is displayed on the display panel.

Connect digital devices through HDMI

Connect a digital device such as a settop box, DVD/Blu-ray player, or games console to this product through a single HDMI connection. When you connect the devices in this way and play a le or game, the

• video is automatically displayed on your TV, and

• audio is automatically played on this product.

1 Using a High Speed HDMI cable,

connect the HDMI OUT connector on your digital device to the HDMI

IN 1/2 on this product.

2 Using a High Speed HDMI cable,

connect the HDMI OUT (ARC) - TO TV connector on this product to the HDMI connector on the TV.

• On your TV and the connected

device, turn on HDMI-CEC controls (if available). For details, see the user manual of the TV and the device.

3 Press HDMI 1/2 on the remote

control of this product to enable the HDMI IN connection.

• If the TV is not HDMI-CEC

compliant, select the correct video input on your TV.

4 Use your

product

This section helps you use this product to play media from a wide range of sources.

Before you start

• Make the necessary connections described in Quick start guide and User manual.

• Switch this product to the correct source for the other devices.

Set clock

Through clock setting, you may select a type of standby (ECO standby without clock display, or normal standby with clock display ).

1 Switch this product to standby

(press ).

» --:-- (or clock) is displayed.

2 Press and hold to activate the

clock setting mode.

» --:-- blinks.

3 Press Volume +/- to select 12 hour

or 24 hour format, then press to conrm.

• If 12 hour format is selected, then

select AM or PM for display.

» The hour digits begin to blink.

4 Press Volume +/- to set the hour,

then press to conrm.

» The minute digits begin to blink.

5 Press Volume +/- to set the minute,

then press to conrm.

» ECO begins to blink.

11EN

B8_37_CD-UM_EN.indd 11 3/03/2017 11:37:43 AM

6 Press Volume +/- to select “ECO” or

“CLOCK”, then press to conrm.

» If you select “ECO” , in standby,

the clock is displayed for 1 minute then the display is switched o.

» If you select “CLOCK”, in

standby, the clock is always displayed.

View clock

1 In ECO standby or operation mode,

press .

» In ECO standby mode, the clock

is displayed for 1 minute, then the display is switched o.

» In operation mode, the clock is

displayed 5 seconds, then the display is switched to the current source information.

• To restore the sound, press

again or press Volume +/-.

Dolby Atmos®

In addition to horizontal distribution of 5-channel audio, this product also has built-in Dolby Atmos enabled speakers as additional audio channels to generate overhead distribution of audio for powerful delivery of 3D sound immersion and greater reality.

2.8~3m

Note

• If AC power is disconnected, the clock time

can only be retained for 24 hours.

• Extreme room temperature aects clock

accuracy.

Auto standby

When playing media from a connected device, this product automatically switches to standby after 15 minutes of button inactivity and no audio/video play from a connected device.

Adjust the volume

1 Press Volume +/- to increase or

decrease a volume level.

• To mute sound, press .

12 EN

0.7~0.8m

2~3m

Optimal setup for Dolby Atmos sound

• Place this product at a height of

0.7m - 0.8m.

• Ceiling height is 2.8m - 3m.

• Listening distance from this product

is 2m - 3m.

• Ceiling is not made of sound absorbent material.

• Preferably no protrusive objects (such as lighting and decorations) are on the ceiling.

Best Dolby Atmos eects may achieve through the following two use cases.

From your Blu-ray disc player:

• Movie with Dolby Atmos.

B8_37_CD-UM_EN.indd 12 3/03/2017 11:37:43 AM

• Your Blu-ray disc player is

connected to this product via

connector.

• On your Blu-ray disc player, enable bitstream/raw audio format for HDMI sound output.

• A high speed HDMI cable.

From your TV:

• Movie with Dolby Atmos.

• Your TV supports Dolby Atmos

bitstream/raw output.

• Your TV is connected to this product via connector.

• A high speed HDMI cable.

Note

• For details on how to connect your Blu-ray

disc player to this product via connector, see “Connect” > “Connect digital devices through HDMI” in the user manual.

Enjoy Dolby Atmos sound

1 Press to select a height

surround eects level to best suit your personal taste according to your environment.

• : no height eect.

• : small height

eect.

• : medium

height eect.

• : big height eect.

Note

• For non-HDMI connections (such as use of

USB, Bluetooth, OPTICAL and COAXIAL), only limited height surround eects are generated.

Choose your sound

This section helps you choose the ideal sound for your video or music.

Sound mode

Select predened sound modes to suit your video or music.

• Press to create a surround listening experience. Ideal for watching movie.

• Press to create two-channel or multi-channel stereo. Ideal for listening to music.

• Press to create sound eect which makes human voice more clear and outstanding for listening.

• Press to automatically select a predened sound mode ( , or ) based on input audio content to optimize audio performance.

Equalizer

Change the high frequency (treble) and low frequency (bass) settings of this product.

1 Press TREBLE +/- or BASS +/- to

change the frequency.

Synchronize video and sound

If the audio and video are not synchronized, delay the audio to match the video.

1 Press AUDIO SYNC +/- to

synchronize the audio with the video.

Auto volume

Turn the auto volume on to keep the volume constant when you switch to a dierent source.

13EN

B8_37_CD-UM_EN.indd 13 3/03/2017 11:37:44 AM

It also compresses the sound dynamics, increasing the volume for quiet scenes and decreasing the volume for loud scenes.

1 Press to turn auto

volume on or o.

» When auto volume is turned on,

scrolls once

on the display panel.

» When auto volume is turned o,

scrolls once

on the display panel.

Night mode

For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.

1 Press NIGHT to turn night mode on

or o.

• When night mode is turned on,

ON NIGHT scrolls once on the display panel.

• When night mode is turned o,

OFF NIGHT scrolls once on the display panel.

Note

• If you turn on auto volume, night mode (if

activated) will be automatically turned o, and vice versa.

Play audio through Bluetooth

Through Bluetooth, connect this product with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio les stored

on the device through the speakers of this product.

What you need

• A Bluetooth device which supports Bluetooth prole A2DP, AVRCP and with Bluetooth version as 3.0.

• The maximum operational range between this product and a Bluetooth device is approximately 10 meters (30 feet).

1 Press on the remote control to

switch this product to Bluetooth mode.

» BT is displayed on the display

panel, blinking.

2 On the Bluetooth device, switch

on Bluetooth, search for and select Fidelio B8 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).

» During connection, BT on the

display panel blinks.

3 Wait until this product beeps.

» When the Bluetooth connection

succeeds, BT is displayed on the display panel.

If the connection fails, BT on the display panel blinks continuously.

4 Select and play audio les or music

on your Bluetooth device.

• During play, if a call is coming,

music play is paused.

• If your Bluetooth device

supports AVRCP prole, on the remote control you can press / to skip to a track, or press to pause/resume play.

5 To exit Bluetooth, select other

source.

14 EN

B8_37_CD-UM_EN.indd 14 3/03/2017 11:37:44 AM

• When your switch back to Bluetooth mode, Bluetooth connection remains active.

Note

• The music streaming may be interrupted

by obstacles between the device and this product, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.

• If you want to connect this product with

another Bluetooth device, press and hold

on the remote control to disconnect the

currently connected Bluetooth device.

Connect Bluetooth via NFC

NFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones.

What you need

• A Bluetooth device with NFC function.

• For pairing, tap the NFC device on the NFC tag of this product.

1 Enable NFC on the Bluetooth

device (see the device’ s user manual for details).

2 Tap the NFC device onto the NFC

tag of this product until this product beeps.

» When the Bluetooth connection

succeeds, BT is displayed on the display panel.

» If the connection fails, BT

on the display panel blinks continuously.

3 Select and play audio les or music

on your NFC device.

• To break the connection, tap again the NFC device onto the NFC tag on this product.

MP3 player

Connect your MP3 player to play your audio les or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio

cable, connect the MP3 player to the AUDIO IN connector on this product.

2 Press repeatedly AUDIO IN on the

remote control until AUDIO IN is displayed on the display panel.

3 Press the buttons on the

MP3 player to select and play audio les or music.

USB storage devices

Enjoy audio on a USB storage device, such as an MP3 player and USB ash memory, etc.

What you need

• A USB storage device that is formatted for FAT16 or FAT32 le systems, and complies with the Mass Storage Class.

• An MP3 le on a USB storage device.

1 Connect a USB storage device to

this product.

2 Press USB on the remote control. 3 Use the remote control to control

play.

15EN

B8_37_CD-UM_EN.indd 15 3/03/2017 11:37:44 AM

• Press to start, pause or resume play.

• Press / to skip to the previous or next track.

• During USB play, press USB to select one of the following play modes.

• ALL RPT: repeat all the tracks

in one folder.

• OFF RPT: repeat mode is

turned o.

Note

• Support a USB storage device up to 32GB.

• This product may not be compatible with

certain types of USB storage device.

• If you use a USB extension cable, USB

HUB, or USB multi-reader, the USB storage device may not be recognized.

• Digital camera PTP and MTP protocols are

not supported.

• Do not remove the USB storage device

while it is being read.

• DRM-protected music les (MP3) are not

supported.

• Support a USB port: 5V , 500mA.

1 In HDMI ARC mode (press HDMI

ARC), on the remote control, within

six seconds, press twice then Volume - once, and then hold down BASS -.

» When the factory settings

restore is complete, the product automatically switches o and restarts.

Set display brightness

You can press DIM repeatedly to select a dierent brightness level of the display panel on this product. If you select AUTO OFF, LED message is switched o after 10 seconds of button inactivity.

Apply factory settings

In case of no response from this product , you can reset this product to the default settings programmed at the factory.

B8_37_CD-UM_EN.indd 16 3/03/2017 11:37:44 AM

5 Update

software

To get the best features and support, update your product with the latest software.

Check software version

In HDMI ARC mode (press HDMI ARC), on the remote control, within six

seconds, press twice then TREBLE - once, and then hold down BASS -.

» The software version number is

displayed on the display panel.

Update software via USB

Caution

• Do not turn o the power or remove the

USB ash drive when the software update is in progress because you might damage this product.

4 Switch this product to HDMI ARC

source (press HDMI ARC).

5 On the remote control, within

6 seconds press twice then

Volume + once, and then hold down MOVIE.

» “UPGRADE” (upgrade) is

displayed briey, then upgrade progress is indicated.

» If a USB ash drive is not

connected or invalid upgrade le is found, "ERROR" (error) is displayed on the display panel.

6 Wait until the upgrade is completed.

» If the upgrade is complete, this

product automatically turns o and on again.

Note

• The upgrade time may take around

8 minutes.

1 Check the latest software version on

www.philips.com/support.

• Search for your model and click on "Software and drivers".

2 Download the software into a USB

ash drive.

a Unzip the downloaded le, and

make sure that the unzipped folder is named “UPG”.

b Put the “UPG” folder in the root

directory.

3 Connect the USB ash drive to the

USB connector on this product.

B8_37_CD-UM_EN.indd 17 3/03/2017 11:37:44 AM

6 Wall mount

Note

• Before wall mounting, make sure the wall

can support the weight of this product.

• For wall mounting, this product must be

securely attached to the wall in accordance with the installation instructions. Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.

7 Product

specifications

Note

• Specications and design are subject to

change without notice.

Screw length/diameter

Depending on the type of wall mounting this product, make sure that you use screws of a suitable length and diameter.

2.2-2.5 mm

8-9.5 mm

See the illustration in the quick start guide on how to wall mount this product.

1) Use the supplied paper template to mark two holes on the wall, then secure two suitable screws in the holes.

2) Fix the two supplied wall brackets on

this product.

3) Hang this product on the wall.

>25 mm

3.5-4 mm

Amplier

• Total output power:

400W RMS (+/- 0.5 dB, 10% THD)

• Frequency response: 20 Hz-20 kHz / ±3 dB

• Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)

• Input sensitivity:

• AUX: 1900 mV

• AUDIO IN: 900 mV

Audio

• S/PDIF Digital audio input:

• Coaxial: IEC 60958-3

• Optical: TOSLINK

USB

• Compatibility: Hi-Speed USB (2.0)

• Class support: USB Mass Storage Class

(MSC)

• File system: FAT16, FAT32

• Supports MP3 le format

Bluetooth

• Bluetooth proles: A2DP, AVRCP

• Bluetooth version: 3.0

B8_37_CD-UM_EN.indd 18 3/03/2017 11:37:45 AM

Main unit

• Power supply:

• Model (Philips branded AC power adapter): DYS902-190473W

• Input: 100-240 V~, 50/60 Hz

1.5 A

• Output: 19V , 4.73A

• Standby without clock display:

≤ 0.5 W

• Standby with clock display: ≤ 1 W

• Dimensions (W x H x D):

1058 x 52 x 120 mm

• Weight: 3.65 kg

• Built-in speakers

• 6 x silk tweeter (1’’, 3 ohm)

• 2 x silk tweeter (0.8’’, 8 ohm)

• 4 x racetrack woofer speaker

(3.5’’ x 1’’ , 16 ohm )

• Centre channel: 2 x racetrack full-range speaker ( 3.5’’ x 1’’, 16 ohm)

• Front/surround channel: 4 x racetrack woofer speaker ( 3.5’’ x 1’’, 8 ohm)

8 Trouble-

shooting

Warning

• Risk of electric shock. Never remove the

casing of the product.

To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support.

Main unit

The buttons on this product do not work.

• Disconnect this product from the power supply for a few minutes, then reconnect.

Subwoofer

• Power supply: 110-127V/220-

240 V~, 50/60 Hz

• Power consumption: 60 W

• Standby power consumption:

≤ 0.5 W

• Impedance: 3 ohm

• Speaker drivers: 1 x 8’’ subwoofer

• Dimensions (W x H x D):

240 x 510 x 302 mm

• Weight: 8.9 kg

Remote control batteries

• 2 x AAA-R03-1.5 V

B8_37_CD-UM_EN.indd 19 3/03/2017 11:37:45 AM

Sound

No sound from the speakers of this product.

• Connect the audio cable from this product to your TV or other devices. However, you do not need a separate audio connection when:

• the product and TV are connected

through HDMI ARC connection, or

• a device is connected to the HDMI

IN connector on this product.

• Reset this product to its factory settings.

• On the remote control, select the correct audio input.

• Make sure that this product is not muted.

No sound from the wireless subwoofer.

• Wirelessly connect the subwoofer to the main unit.

Distorted sound or echo.

• If you play audio from the TV through this product, make sure that the TV is muted.

Audio and video are not synchronized.

• Press AUDIO SYNC +/- to synchronize the audio with the video.

Error message is displayed on the display panel.

• When "ERROR" is displayed, it indicates that an input audio format is not supported.

• When "ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected.

Bluetooth

A device cannot connect with this product.

• The device does not support the compatible proles required for this product.

• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.

• The device is not correctly connected. Connect the device correctly.

• This product is already connected with another Bluetooth device. Disconnect the connected device, then try again.

Quality of audio play from a connected Bluetooth device is poor.

• The Bluetooth reception is poor. Move the device closer to this product, or remove any obstacle between the device and this product.

The connected Bluetooth device connects and disconnects constantly.

• The Bluetooth reception is poor. Move the device closer to this product, or remove any obstacle between the device and this product.

• Turn o Wi-Fi function on the Bluetooth device to avoid interference.

• For some Bluetooth, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of this product.

NFC

A device cannot connect with this product via NFC.

• Make sure that the device is supported by NFC.

• Make sure that NFC is enabled on the device (see the device’ s user manual for details).

• For pairing, tap the NFC device on the NFC tag of this product.

Dolby Atmos

Cannot achieve outstanding Dolby Atmos eects.

• For non-HDMI connections (such as use of USB, Bluetooth, OPTICAL and COAXIAL), limited height surround eects are generated. See the section of “Dolby Atmos” about how to achieve best Dolby Atmos eects.

B8_37_CD-UM_EN.indd 20 3/03/2017 11:37:45 AM

9 Notice

This section contains the legal and trademark notices.

Notice of compliance

The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:

a This device may not cause harmful

interference, and

b This device must accept any

interference received, including interference that may cause undesired operation.

FCC rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Relocate the receiving antenna.

• Increase the separation between

equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:This equipment complies

with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter.

Warning: Any changes or modications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Model number: B8/37 Trade Name: Philips Responsible Party: Gibson Innovations USA Inc.PO BOX 100572, Nashville TN 37224

Canada:

CAN ICES-3(B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section

2.5 of RSS 102 and compliance with

RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

B8_37_CD-UM_EN.indd 21 3/03/2017 11:37:45 AM

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts. com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI HighDenition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.

The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.

B8_37_CD-UM_EN.indd 22 3/03/2017 11:37:46 AM

PHILIPS LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth below.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period. At its option, Philips will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory, or (3) refund the original purchase price of the product. Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Philips’ property. When a refund is given, your product becomes Philips’ property.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:

This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than Philips or Philips Authorized Service Location, (c) to a product a part that has been modified without the written permission of

original product’s warranty,

Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product to Philips.

• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of Philips.

• Damage or claims for products not being available for use, or for lost data or lost software.

• Damage from mishandled shipments or transit accidents when returning product to Philips.

• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of

• A product used for commercial or institutional purposes

• Product lost in shipment and no signature verification receipt

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA, PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

products damaged by these modifications. (including but not limited to rental purposes). can be provided.

1-888-381-0749

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Gibson Innovations USA Inc. PO BOX 100572 Nashville TN 37224

B8_37_CD-UM_EN.indd 23 3/03/2017 11:37:46 AM

2016

Specifications are subject to change without notice The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. 2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.

B8_37_UM_V1.0

B8_37_CD-UM_EN.indd 24 3/03/2017 11:37:46 AM

English SkyQuake

B8 - Important

Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

Important safety instructions

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at

plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Use only with the cart, stand, tripod, bracket or table

specied by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storm or when

unused for long periods of time.

• Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Battery usage CAUTION - To prevent battery leakage which may result in

bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, + and - as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

• The batteries shall not be exposed to excessive heat such as

sunshine, re or the like.

• Perchlorate Material - special handling may apply. See www.dtsc.

• The product/remote control may contain a coin/button type battery,

• If you suspect that a battery has been swallowed or placed inside any

• When you change the batteries, always keep all new and used batteries

• If the battery compartment cannot be completely secured, discontinue

• This apparatus should not be placed in a built-in installation such as

Class II equipment symbol

This symbol indicates that the unit has a double insulation system.

Know these safety symbols

apparatus should not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com. This product contains batteries:

• Dispose of batteries properly. Do not incinerate. Batteries may explode if

• Do not wrap in metal or aluminum foil. Wrap in newspaper before

• It is suggested that you contact your local town or city to determine

• Please visit www.call2recycle.org for additional information on a recycling

ca.gov/hazardouswaste/perchlorate.

which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.

part of the body, seek immediate medical attention.

out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.

use of the product. Keep out of reach of children and contact the manufacturer.

• Apparatus shall not be exposed to dripping or splashing.

• Do not place any sources of danger on the apparatus (for example.

liquid lled objects, lighted candles).

• This apparatus may contain lead and mercury. Dispose according to

local, State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com.

• Where the MAINS plug or an appliance coupler is used as the disconnect

device, the disconnect device shall remain readily operable.

• Do not place this apparatus on the furniture that is capable of being

tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death.

a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.

This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: To reduce the risk of re or electric shock, this

overheated.

discarding.

proper battery redemption site(s) in your area.

center in your area for rechargeable batteries.

Notice of compliance

The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

a This device may not cause harmful interference, and b This device must accept any interference received, including

interference that may cause undesired operation.

FCC rules

• Relocate the receiving antenna.

• Increase the separation between equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter.

PO BOX 100572, Nashville TN 37224

Canada:

2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Help and support

For extensive online support, visit www.philips.com/support to:

• download the user manual and the quick start guide

• watch video tutorials (available only for selected models)

• nd answers to frequently answered questions (FAQs)

• email us a question

• chat with our support representative.

Español

Importante

Lea y asegúrese de comprender todas las instrucciones antes de usar el producto. La garantía no cubre los daños producidos por no haber seguido las instrucciones.

Instrucciones de seguridad importantes

• Lea estas instrucciones.

• Conserve estas instrucciones.

• Preste atención a todas las advertencias.

• Siga todas las instrucciones.

• No utilice este aparato cerca del agua.

• Utilice únicamente un paño seco para la limpieza.

• No bloquee las aperturas de ventilación. Realice la instalación de

acuerdo con las indicaciones del fabricante.

• No realice la instalación cerca de fuentes de calor como radiadores,

rejillas de calefacción, estufas u otros equipos que produzcan calor (incluso amplicadores).

• Utilice el conector polarizado o con conexión a tierra

de conformidad con las normas de seguridad. Un enchufe polarizado cuenta con dos álabes, uno más ancho que el otro. Los conectores a tierra tienen dos conductores y una tercera terminal de contacto para la conexión a tierra. El conductor ancho o la tercera terminal de contacto con conexión a tierra se proveen para mayor seguridad. Si el enchufe suministrado no encaja correctamente en el tomacorriente, consulte a un electricista para reemplazar la toma.

• Proteja el cable de alimentación. Evite pisar o doblar el cable, en

particular a la altura del conector y las terminales de contacto del aparato.

• Utilice sólo los accesorios que especica el fabricante.

• Utilice sólo el carrito, el soporte, el trípode y la mesa

que indica el fabricante y los que incluye el equipo. Tenga cuidado cuando transporte el equipo en el carrito para evitar caídas y posibles lesiones.

• Desenchufe el equipo durante tormentas eléctricas o

cuando no se utilice por un período prolongado.

• Todos los trabajos de servicio técnico deben ser realizados por

personal de servicio calicado. Solicite el servicio de asistencia técnica cuando, por ejemplo, el cable de alimentación o el conector están dañados, si se derramó líquido o cayeron objetos dentro del aparato, si el equipo estuvo expuesto a la lluvia o humedad, si no funciona normalmente o si se cayó.

• PRECAUCIÓN: para evitar que las baterías se sulfaten y puedan

ocasionar lesiones, daños materiales o en la unidad:

• Instale todas las baterías de forma correcta, de acuerdo con los signos + y - marcados en la unidad.

• No utilice baterías de distintas clases (nuevas y usadas o de carbono y alcalinas, etc.).

• Extraiga las pilas cuando no utilice la unidad durante un período prolongado.

• No exponga las baterías a temperaturas altas como las que emiten la luz solar, el fuego u otros elementos similares.

• Este producto contiene perclorato y puede requerir un método de manipulación especial. Visite www.dtsc.ca.gov/hazardouswaste/ perchlorate.

• El producto/control remoto puede contener una batería tipo botón o

moneda fácil de tragar. Siempre mantenga las baterías lejos del alcance de los niños. En caso de ingestión la batería podría causar lesiones graves o la muerte. Puede haber quemaduras internas graves en un plazo de dos horas tras la ingestión.

• Si sospecha que una batería se ha ingerido o introducido en cualquier

parte del cuerpo, consulte inmediatamente a un médico.

• Al cambiar las baterías, mantenga siempre las baterías nuevas y usadas

lejos del alcance de los niños. Verique que el compartimiento de la batería esté bien cerrado luego de reemplazar la batería.

• Si el compartimiento de la batería no puede cerrarse, discontinúe el uso

del producto. Manténgalo lejos del alcance de los niños y comuníquese con el fabricante.

• No exponga el equipo a goteos ni salpicaduras.

• No coloque el aparato cerca de fuentes de peligro (por ejemplo, objetos

que contengan líquidos o velas encendidas).

• Este aparato puede contener plomo y mercurio. Cumpla con la

normativa local, estatal o nacional sobre eliminación de productos. Comuníquese con las autoridades locales para solicitar información sobre la eliminación o el reciclaje de productos. Para obtener más información sobre las opciones de reciclaje disponibles, ingrese en cualquiera de los siguientes sitios web: www.mygreenelectronics.com, www.eiae.org, www.recycle.philips.com.

• Si el conector de alimentación u otro conector se utilizan como

dispositivos de desconexión, deben estar accesible y fáciles de operar.

• No coloque este aparato sobre muebles que adultos o niños puedan

tirar, inclinar o utilizar para subirse sobre ellos. Si el aparato se cae, puede causar heridas graves o incluso la muerte.

• Este aparato no debe ubicarse en una instalación cerrada como una

estantería o un rack, a menos que esté adecuadamente ventilada. Verique que haya un espacio mínimo de 20 cm (7,8 pulg) alrededor del aparato.

Símbolo de equipo de Clase II

Este símbolo indica que la unidad tiene un sistema de doble aislamiento.

Conozca estos símbolos de seguridad

El símbolo del rayo indica que los componentes sin aislamiento dentro de la unidad pueden generar descargas eléctricas. Para la seguridad de todas las personas de su hogar, no retire la cubierta del producto.

El signo de exclamación indica las características del producto que pueden provocar problemas de funcionamiento y mantenimiento. Por eso, se recomienda leer el manual de instrucciones.

ADVERTENCIA: Para reducir el riesgo de incendios o descargas eléctricas, no exponga el aparato a la lluvia ni a la humedad, ni coloque sobre él objetos que contengan líquidos (por ejemplo, jarrones).

PRECAUCIÓN: Para evitar descargas eléctricas, el conductor ancho debe introducirse por completo en la ranura adecuada.

Protección del producto

Utilice únicamente un paño de microbra para limpiar el producto.

Cuidado del medio ambiente

Eliminación del producto antiguo y las pilas Este producto ha sido diseñado y fabricado con materiales y componentes de alta calidad que pueden reciclarse y reutilizarse. Este producto puede contener plomo y mercurio. La eliminación de estos materiales puede estar sometida a regulaciones debido a consideraciones ambientales. Para obtener información sobre el desecho o reciclaje de estos materiales, comuníquese con las autoridades locales o visite www.recycle.philips.com. Este producto contiene pilas:

• Deseche las baterías de forma adecuada. No las incinere. Las baterías

pueden explotar si se sobrecalientan.

• No las envuelva en papel metálico ni de aluminio. Envuélvalas en papel

de diario antes de desecharlas.

• Se recomienda comunicarse con los funcionarios locales pertinentes

para obtener información acerca de centros de reciclaje autorizados.

• Visite www.call2recycle.org para obtener más información sobre centros

de reciclaje para pilas recargables de su zona.

Aviso de cumplimiento

El dispositivo cumple con los reglamentos de la FCC, apartado 15. El funcionamiento está sujeto a las siguientes condiciones:

a El dispositivo no debe causar interferencias nocivas y b debe recibir todo tipo de interferencias, incluso las que originan un

funcionamiento indeseado.

Normas de la Comisión Federal de Comunicaciones (FCC)

Este equipo se ha probado y se ha determinado que cumple con los límites para un dispositivo digital clase B, de acuerdo con el apartado 15 de las normativas de la FCC. Estos límites están destinados a ofrecer una protección razonable contra interferencias dañinas dentro de una instalación residencial. Este equipo genera, utiliza y puede emitir energía de radiofrecuencia. Si no se instala y utiliza de conformidad con el manual de instrucciones, puede ocasionar interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no existe garantía de que no se producirá interferencia en una instalación en particular. Si este equipo provoca interferencias perjudiciales en la recepción de radio o televisión, lo que puede determinarse encendiendo y apagando el equipo, se recomienda al usuario intentar corregir la interferencia mediante una o varias de las siguientes medidas:

• Cambie la posición de la antena receptora.

• Aumente la distancia entre el equipo y el receptor.

• Conecte el equipo a un tomacorriente de un circuito diferente del que

está conectado el receptor.

• Para obtener ayuda, comuníquese con el distribuidor o con un técnico

de radio o televisión calicado.

Normas sobre la exposición a campos de radiación de la FCC: este equipo cumple con la normativa que regula los límites de exposición a la radiación de FCC para ambientes no controlados. Este equipo debe instalarse y utilizarse con una distancia mínima de 20 cm entre el radiador y el cuerpo. No coloque este aparato cerca de otros transmisores o antenas, ni lo utilice con este tipo de dispositivos.

Advertencia: Cualquier alteración o modicación a este dispositivo, que no cuente con la autorización expresa de Gibson Innovations, puede anular el derecho del usuario para utilizar el equipo. Número de modelo: B8/37 Nombre comercial: Philips Parte responsable: Gibson Innovations USA Inc.

PO BOX 100572, Nashville TN 37224

Canadá:

CAN ICES-3(B)/NMB-3(B) Este dispositivo cumple con los RSSs exentos de licencia de Industry Canada. El funcionamiento queda sujeto a las siguientes dos condiciones: (1) este dispositivo no debe producir interferencias, y (2) debe recibir todo tipo de

interferencia, incluso aquellas que pueden causar un funcionamiento no deseado del dispositivo. El dispositivo cumple con la exención de límites en la evaluación de rutina en la sección 2.5 de RSS 102 y cumple con la exposición RSS-102 RF, los usuarios pueden obtener información canadiense sobre la exposición y cumplimiento de RF. No coloque este aparato cerca de otros transmisores o antenas, ni lo utilice junto a este tipo de dispositivos. Este equipo se debe instalar y manejar a una distancia mínima de 20 cm entre el radiador y su cuerpo.

México:

La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

Ayuda y asistencia técnica

Para obtener una amplia asistencia en línea, visite www.philips.com/support para:

• descargar el manual de usuario y la guía de inicio rápido

• ver tutoriales de video (solo disponible para modelos seleccionados)

• buscar respuestas a preguntas frecuentes (FAQ)

• enviarnos un correo electrónico con una pregunta

• chatear con nuestro representante de soporte.

Siga las instrucciones del sitio web para seleccionar su idioma e ingrese el número de modelo de su producto. También puede ponerse en contacto con el servicio de atención al cliente de su país. Antes de ponerse en contacto, anote el modelo y número de serie del producto. Puede buscar esta información en la parte posterior o inferior del producto.

Français

Important

Lisez attentivement toutes les instructions avant d’utiliser le téléviseur. Si des dommages sont causés par le non-respect des instructions, la garantie ne sera pas applicable.

Consignes de sécurité importantes

• Lisez ces instructions.

• Conservez ces instructions.

• Tenez compte de tous les avertissements.

• Suivez toutes les instructions.

• N’utilisez pas cet appareil près de l’eau.

• Nettoyez l’appareil avec un chion sec seulement.

• N’obstruez aucune prise de ventilation. Installez l’appareil en

conformité avec les instructions du fabricant.

• N’installez pas l’appareil près d’une source de chaleur comme un

radiateur, un registre de chaleur ou un autre appareil (incluant les amplicateurs) qui produit de la chaleur.

• Ne passez pas outre les instructions de sécurité

concernant la che polarisée ou la che de mise à la terre. Une che polarisée est composée de deux broches dont l’une est plus large que l’autre. Une che de mise à la terre est composée de deux broches et d’une broche de masse. La broche plus large et la broche de masse visent à assurer votre sécurité. Si la che fournie ne peut être insérée dans la prise, consultez un électricien pour qu’il remplace votre prise désuète.

• Protégez le cordon d’alimentation de façon à ce qu’il ne puisse pas être

écrasé ou pincé; vériez particulièrement les ches, les prises et la sortie du l dans l’appareil.

• Utilisez seulement les accessoires spéciés par le fabricant.

• Utilisez seulement le chariot, le support, le trépied ou la

table spéciés par le fabricant ou vendu avec l’appareil. Si vous utilisez un chariot, faites attention lorsque vous le déplacez an d’éviter de vous blesser en cas de renversement de l’appareil.

• Débranchez cet appareil pendant les orages avec

éclairs ou s’il n’est pas utilisé pendant de longues périodes.

• Toute réparation doit être faite par un technicien qualié. Une réparation

est nécessaire quand l’appareil a été endommagé, par exemple, quand le cordon ou la che d’alimentation ont été endommagés, quand un objet a été introduit dans l’appareil ou quand l’appareil a été mouillé, exposé à la pluie ou à l’humidité, qu’il ne fonctionne pas correctement ou qu’il a été échappé.

• AVERTISSEMENT relatif à l’utilisation de piles – An d’éviter une fuite

des piles pouvant entraîner des blessures ou des dommages matériels :

• Installez toutes les piles correctement en alignant les pôles + et - tel

qu’indiqué sur l’appareil.

• Ne combinez pas des piles diérentes (neuves et usagées, au carbone et alcalines, etc.).

• Retirez les piles lorsque l’appareil n’est pas utilisé pendant une longue période.

• Les piles intégrées ne doivent pas être exposées à une chaleur excessive, comme les rayons du soleil ou le feu.

• Produits contenant du perchlorate : une manipulation particulière peut être requise. Consulter www.dtsc.ca.gov/hazardouswaste/ perchlorate.

• L’appareil ou sa télécommande peuvent contenir une pile bouton qu’un

enfant pourrait avaler. Gardez ce type de pile hors de portée des enfants à tout moment! En cas d’ingestion, la pile peut provoquer des blessures sérieuses voire la mort. De graves brûlures internes peuvent survenir dans les deux heures suivant l’ingestion.

• Si vous croyez qu’une pile a été ingérée ou introduite dans le corps de

quelqu’un, consultez immédiatement votre médecin.

• Lorsque vous changez les piles, assurez-vous que les piles neuves et

usagées sont hors de portée des enfants. Une fois le changement de pile eectué, assurez-vous que son compartiment est bien fermé et sécurisé.

• Si vous ne parvenez pas à sécuriser le compartiment de la pile, cessez

d’utiliser l’appareil. Gardez l’appareil hors de portée des enfants et communiquez avec le fabricant.

• N’exposez pas l’appareil aux éclaboussures, ni aux déversements.

• Ne placez aucune source de danger sur l’appareil (par exemple des

objets remplis de liquide ou des bougies allumées).

• Cet appareil peut contenir du plomb et du mercure. Mettez l’appareil

au rebut conformément aux lois municipales, provinciales ou fédérales. Pour en savoir plus sur la mise au rebut ou sur le recyclage, veuillez communiquer avec les autorités locales. Pour de plus amples renseignements sur les diverses possibilités de recyclage, visitez les sites www.mygreenelectronics.com, www.eiae.org ou www.recycle.philips.com.

• Si la che d’alimentation ou un coupleur d’appareil est utilisé comme

dispositif de découplage, celui-ci doit rester facilement accessible.

• Ne placez pas cet appareil sur un meuble qu’un enfant pourrait faire

basculer ou qu’un adulte pourrait renverser involontairement en s’appuyant ou en grimpant dessus ou encore en le tirant. La chute d’un appareil peut provoquer des blessures graves, voire la mort.

• Cet appareil ne doit pas être placé dans un meuble encastré comme

une bibliothèque ou une étagère, à moins que l’emplacement ore une ventilation susante. Veillez à garder un espace dégagé d’au moins 20 cm (7,8») autour de cet appareil.

B8_37_Safety_V1.0.indd 1-4 2017/3/1 11:18:24

Symbole d’équipement de classe II

PHILIPS LIMITED WARRANTY

Note: Any product sold and identified as refurbished or

renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all requirements

can result in delay.

Nota: Cualquier producto que se venda y que esté identi-

ficado como reacondicionado o renovado tiene una

garantía limitada de noventa (90) días.

El producto de reemplazo sólo se puede enviar si se

cumplen todos los requisitos de la garantía. El

incumplimiento de tales requisitos puede ocasionar un

retardo.

Gibson Innovations USA Inc. PO BOX 100572 Nashville TN 37224

GARANTIE LIMITÉE PHILIPS

COUVERTURE DE GARANTIE:

La provision pour garanties de PHILIPS se limite aux termes

énumérés ci-dessous.

QUI EST COUVERT?

Philips garantit le produit au premier acheteur ou à la personne

recevant le produit en cadeau contre tout défaut de matière ou de

main d’œuvre conformément à la date d’achat originale (« Période

de garantie ») d’un distributeur agréé. Le reçu de vente original indi-

quant le nom du produit ainsi que la date d’achat d’un détaillant

agréé est considéré comme une preuve d'achat.

QU'EST-CE QUI EST COUVERT?

La garantie de Philips couvre les nouveaux produits contre tout

défaut de matière ou de main d’œuvre et suivant la réception par

Philips d’une réclamation valide dans les limites de la garantie. Philips

s’engage, à son choix, à (1) réparer le produit gratuitement avec des

pièces de rechange neuves ou remises à neuf, ou à (2) échanger le

produit pour un produit neuf ou ayant été fabriqué à partir de

pièces neuves ou usagées en bon état et au moins fonctionnellement

équivalent ou comparable au produit d’origine dans l’inventaire

actuel de Philips, ou à (3) rembourser le prix d’achat initial du pro-

duit.

Philips garantit les produits ou pièces de remplacement prévus sous

cette garantie contre tout défaut de matière

partir de la date de remplacement ou de réparation pour une péri-

ode de quatre-vingt-dix (90) jours ou pour la portion restante de la

garantie du produit d’origine, la plus longue de ces couvertures étant

à retenir. Lorsqu’un produit ou une pièce est échangée, tout article

de rechange devient votre propriété et l’article remplacé devient la

propriété de Philips. Lorsqu’un remboursement est effectué, votre

produit devient la propriété de Philips.

Remarque : tout produit vendu et identifié comme étant

remis à neuf ou rénové porte une garantie limitée de qua-

tre-vingt-dix (90) jours.

Un produit de remplacement ne pourra être envoyé que si

toutes les exigences de la garantie ont été respectées. Tout

manquement de répondre à toutes les exigences pourra

entraîner un délai.

LIMITATIONS:

Cette garantie limitée ne s’applique qu’aux nouveaux produits fab-

riqués par ou pour Philips pouvant être identifiés par la marque de

commerce, le nom commercial ou le logo qui y sont apposés. Cette

garantie limitée ne s’applique à aucun produit matériel ou logiciel

non Philips, même si celui-ci est incorporé au produit ou vendu avec

celui-ci. Les fabricants, fournisseurs ou éditeurs non-Philips peuvent

fournir une garantie séparée pour leurs propres produits intégrés au

produit fourni.

Philips ne saurait être tenu responsable de tout dommage ou perte

de programmes, données ou autres informations mis en mémoire

dans tous médias contenus dans le produit ou de tout produit ou

pièce non-Philips non couvert par cette garantie. La récupération ou

réinstallation des programmes, données ou autres informations

pas couverte par cette garantie limitée.

Cette garantie ne s’applique pas (a) aux dommages causés par un

accident, un abus, un mauvais usage, une négligence, une mauvaise

application ou à un produit non-Philips, (b) aux dommages causés

par un service réalisé par quiconque autre que Philips ou qu’un cen-

tre de service agréé de Philips, (c) à un produit ou pièce ayant été

Gibson Innovations USA Inc. PO BOX 100572 Nashville TN 37224

Importador:

Gibson Innovations Mexicana, S. de R.L. de C.V.

Av. Patriotismo 201 Piso 4 Col. San Pedro de los Pinos,

C.P. 03800, Ciudad de México, México

La presente garantía contará a partir de: DIA______________ MES________________ AÑO__________

En caso que su producto presente alguna falla, consulte en nuestra pagina el taller mas cercano a su domicilio, y en caso de tener alguna duda contacte a alguno

de nuestros talleres regionales, en donde con gusto le atenderemos en todo lo relativo a:

- Servicio de sus productos Audio Philips - Información de productos audio y talleres autorizados Philips

- Asesoría en el manejo de instalación de su producto Audio Philips - Información en donde puede adquirir productos audio y accesorios Philips

Para hacer efectiva la garantía de su producto, es necesario presentar esta póliza acompañada de su factura de compra.

TALLERES REGIONALES

Zona Sur

SISTEMAS, EQUIPO Y MATENIMIENTO, S.A. DE C.V.

BOSQUE CENTRAL, MZ. 40 LT 16

COL. BOSQUES DEL VALLE

C.P. 55717

COACALCO ESTADO DE MEXICO

Clave lada.(0155) 2159-2558, 2159-2548

julianromeu@aol.com

ABORATORIO DE ESPECIALIDADES ELECTRONICAS COMERCIALES (LEECOM, S.A. DE C.V.)

AV. ARBOLEDAS #2500 LOCAL 30 F. C.P. 44530, GUADALAJARA JALISCO, MEXICO

ESTA POLIZA ES GRATUITA

Este aparato ha sido cuidadosamente diseñado y se ha fabricado con los mejores materiales bajo un estricto control de calidad garantizando su buen

funcionamiento por los periodos establecidos según el aparato (ver lista en la parte inferior) a partir de la entrega del aparato al consumidor.

Esta poliza incluye la reparación o reposición gratuita de cualquier parte o componente que eventualmente fallase y la mano de obra necesaria para su

reparación, así como los gastos de transportación razonablemente erogados dentro de nuestros centros de servicio, misma que se hará efectiva en

cualquiera de nuestros centros de servicio autorizados en el país.

Si su aparato llegase a requerir de nuestro servicio de garantía, acuda al centro de servicio mas cercano a su domicilio (Favor de validar en la pagina de

servicio) http://www.philips.com.mx/support.

Gibson Innovations Mexicana, S. de R.L. de C.V. a través de sus centros de servicio autorizados, reparará y devolver a usted su aparato en un plazo no

autorizados.

Esta póliza solo tendrá validéz, si está debidamente requisitada, sellada por la casa vendedora, en caso de extravío de esta póliza, podrá hacer efectiva su

garantía con la presentación de su factura de compra.

ESTA PÓLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS:

-Cuando el aparato sea utilizado en condiciones distintas a las normales.

-Cuando el aparato no haya sido operado de acuerdo con el instructivo de uso que se le acompaña.

-Cuando la causa de la falla o mal funcionamiento sea consecuencia de una reparación inadecuada o alteración producida por personas no autorizadas por

Gibson Innovations Mexicana, S. de R.L. de C.V

PERIODOS DE GARANTÍA

equipos modulares, teléfonos, teléfonos inalámbricos, auto estéreos, DVD’s portátiles, base par Ipod y bocinas inalámbricas (Bluetooth).

Ce symbole signie que l’appareil sur lequel il est apposé est doté d’une double isolation.

Sachez reconnaître ces symboles de sécurité

Ce symbole «d’éclair» signale des matériaux non isolés présents dans votre appareil et pouvant causer un choc électrique. Pour assurer la sécurité des membres de votre famille, veuillez ne pas enlever le couvercle du produit.

Les «points d’exclamation» ont pour but d’attirer votre attention sur des caractéristiques à propos desquelles vous devez lire attentivement la documentation accompagnant l’appareil an d’éviter tout problème de fonctionnement et d’entretien.

AVERTISSEMENT : an de réduire les risques d’incendie ou de

choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. Ne posez pas dessus d’objets remplis de liquides, tels que des vases. ATTENTION : pour éviter les chocs électriques, introduisez la broche la plus large de la che dans la borne correspondante de la prise et poussez à fond.

Précautions d’utilisation de votre appareil

Utilisez seulement un chion en microbre pour nettoyer l’appareil.

Respect de l’environnement

Mise au rebut de votre ancien appareil et de la pile Votre produit a été conçu et fabriqué avec des matériaux et des composants de grande qualité, qui peuvent être recyclés et réutilisés. Ce produit peut contenir du plomb et du mercure. La mise au rebut de ces matériaux peut être réglementée pour des raisons environnementales. Pour en savoir plus sur la mise au rebut ou sur le recyclage, veuillez communiquer avec les autorités locales ou visiter le site www.recycle.philips.com.

Ce produit contient des piles :

• Mettez les piles au rebut de façon responsable. Ne les incinérez pas. Les

piles risquent d’exploser en cas de surchaue.

• Ne les emballez pas dans du papier métallique ou d’aluminium.

Emballez les piles dans du papier journal avant de les mettre au rebut.

• Nous vous suggérons de communiquer avec les responsables de votre

ville pour connaître le ou les sites où vous pouvez laisser votre batterie.

• Visitez le site www.call2recycle.org pour obtenir des renseignements

supplémentaires sur un centre de recyclage pour piles rechargeables dans votre région.

Avis de conformité

Cet appareil est conforme aux règlements de la FCC, partie 15. Le fonctionnement est assujetti aux deux conditions suivantes :

a Cet appareil ne doit pas causer d’interférence préjudiciable et b doit accepter toute interférence reçue, y compris les interférences qui

peuvent causer un fonctionnement non désiré.

Règlement de la FCC

Cet équipement a été testé et jugé compatible avec les limites s’appliquant aux appareils numériques de la classe B, conformément à l’article 15 du règlement de la FCC. Ces limites ont été dénies pour fournir une protection raisonnable contre les interférences nuisibles dans le cadre d’une installation résidentielle. Cet équipement génère, utilise et peut émettre de l’énergie radiofréquence et, s’il n’est pas installé ni utilisé conformément aux instructions, peut causer des interférences gênantes pour les communications radio. Rien ne garantit toutefois que des interférences ne surviendront pas dans une installation particulière. Si cet équipement cause des interférences nuisibles à la réception de la radio ou de la télévision, ce qui peut être déterminé en mettant l’équipement hors tension puis sous tension, l’utilisateur devra essayer de corriger ces interférences en eectuant une ou plusieurs des opérations suivantes :

• Déplacez l’antenne de réception.

• Augmentez la distance entre l’équipement et le récepteur.

• Branchez l’équipement à une prise d’un circuit autre que celui sur lequel

le récepteur est branché.

• Consultez le détaillant ou un technicien de radiotélévision expérimenté.

Énoncé de la FCC sur l’exposition aux rayonnements radioélectriques : cet appareil est conforme aux limites d’exposition aux rayonnements radioélectriques de la FCC pour un environnement non contrôlé. Cet appareil doit être installé et utilisé en conservant une distance minimale de 20 centimètres entre le radiateur et votre corps. Cet émetteur ne doit pas être installé au même endroit qu’une autre antenne ou un autre émetteur ni utilisé avec un tel dispositif.

Avertissement : Tout changement ou toute modication apportés à cet appareil sans l’autorisation expresse de Gibson Innovations peut annuler le droit de l’utilisateur à utiliser l’équipement. Numéro de modèle : B8/37 Marque : Philips Partie responsable : Gibson Innovations USA Inc.

PO BOX 100572, Nashville TN 37224

Canada :

CAN ICES-3(B)/NMB-3(B) Cet appareil est conforme aux CNR sans licence d’Industrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes :(1) l’appareil ne doit pas causer d’interférences et (2) l’appareil doit accepter toute interférence, y compris les interférences qui peuvent nuire à son bon fonctionnement. Cet appareil est conforme à l’exemption des limites d’évaluation courante de la section 2.5 et à l’exposition aux radiofréquences de la norme CNR-102, laquelle permet aux utilisateurs canadiens d’obtenir de l’information sur la conformité et l’exposition aux radiofréquences. Cet émetteur ne doit pas être installé au même endroit que toute autre antenne ou tout autre émetteur ni utilisé avec un tel dispositif. Cet équipement doit être installé et utilisé à une distance minimale de 20 centimètres entre le radiateur et votre corps.

Specications are subject to change without notice. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. 2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product.

B8_37_Safety_V1.0

Aide et soutien

Pour un service complet à la clientèle en ligne, visitez le site www.philips.com/support pour eectuer les opérations suivantes :

• télécharger le manuel d’utilisation et le guide de démarrage rapide

• regarder des didacticiels vidéo (pour certains modèles seulement)

• trouver des réponses aux questions les plus fréquentes (FAQ)

• nous envoyer une question par courriel

• clavarder avec un de nos représentants du service à la clientèle

Suivez les instructions sur le site Web pour sélectionner votre langue, ensuite entrez le numéro de modèle de votre produit. Vous pouvez également communiquer avec le service à la clientèle dans votre pays. Notez auparavant le numéro de modèle et le numéro de série de votre produit. Vous pouvez trouver cette information à l’arrière de votre appareil.

servicio autorizado de Philips; (c) a productos o piezas que se

cualquier persona distinta de Philips o de un establecimiento de

UN (1) AÑO

GARANTÍA LIMITADA PHILIPS

hayan modificado sin la autorización por escrito de Philips; (d) si

se ha retirado o desfigurado el número de serie de Philips; y tam-

poco se aplica la garantía a (e) productos, accesorios o insumos

vendidos TAL COMO ESTÁN sin garantía de ningún tipo, lo que

• Los costos de envío al devolver el producto defectuoso a

algunos distribuidores.

Esta garantía limitada no cubre:

incluye productos Philips vendidos TAL COMO ESTÁN por

2016

hechas a

1-888-381-0749

instalación o mantenimiento inadecuada, a conexiones

fuente de señal externos al producto.

• Los costos de mano de obra por la instalación o configu-

un suministro de voltaje inadecuado, sobrevoltaje de la línea de

debido al desgaste normal, reparaciones no autorizadas u otras

fijo durante períodos prolongados, reparaciones cosméticas

marcas en la pantalla producto de la visualización de contenido

alimentación, daño causado por relámpagos, imágenes retenidas o

causas que no se encuentren bajo el control de Philips.

• Daños o reclamos por productos que no están disponibles para

• Daños debido a mala manipulación en el transporte o acci-

su uso, por datos perdidos o por pérdida de software.

• Un producto que requiera modificación o adaptación para per-

mitir su funcionamiento en algún país que no sea el país para el

dentes de envío al devolver el producto a Philips.

que se diseñó, fabricó, aprobó y/o autorizó o la reparación de

• La reparación del producto o el reemplazo de piezas debido a

ración del producto, el ajuste de controles del cliente en el

producto y la instalación o reparación de sistemas de antena o

Philips.

productos dañados por estas modificaciones.

• Un producto que se use para propósitos comerciales o institu-

• La pérdida del producto en el envío y cuando no se pueda pro-

cionales (lo que incluye, entre otros, los de alquiler).

porcionar una firma que verifique el recibo.

• No operar según el Manual del propietario.

PARA OBTENER AYUDA EN LOS EE.UU., CANADA,

PUERTO RICO O EN LAS ISLAS VÍRGENES DE

LOS EE.UU...

Comuníquese con el Centro de Atención al Cliente al:

LA REPARACIÓN O EL REEMPLAZO, SEGÚN LO DISPONE

GARANTÍA EXPRESA O IMPLÍCITA SOBRE ESTE PRODUCTO.

CLIENTE. PHILIPS NO SERÁ RESPONSABLE DE LOS DAÑOS

INCIDENTALES O INDIRECTOS QUE INFRINJAN ALGUNA

ESTA GARANTÍA, ES LA SOLUCIÓN EXCLUSIVA PARA EL

PRODUCTO ESTÁ LIMITADA EN DURACIÓN A LO QUE

CON EXCEPCIÓN DE LO QUE PROHÍBA LA LEY VIGENTE,

ESPECIFIQUE ESTA GARANTÍA.

TODA GARANTÍA IMPLÍCITA DE COMERCIABILIDAD Y

ADECUACIÓN PARA UN PROPÓSITO PARTICULAR EN ESTE

sea

Algunos estados no permiten las exclusiones ni la limitación de

los daños incidentales o indirectos, ni permiten limitaciones sobre

la duración de la garantía implícita, de modo que las limitaciones

o exclusiones anteriores pueden no aplicarse a usted.

http://www.philips.com.mx/support

GIBSON INNOVATIONS MEXICANA, S. DE R.L. DE C.V.

Zona Norte

(centro comercial plaza arboledas)

Clave lada.(0133) 3615-7262, 3616-8327 y 1523-0077

leecom1@hotmail.com philips.leecom@hotmail.com

Contacto: Lifestyle Entertainment

www.soportephilips.com

los materiales y en la mano

COBERTURA DE GARANTÍA:

Philips, or (d) if any Philips serial number has been removed or

ONE (1) YEAR

establecidos a continuación.

La obligación de la garantía PHILIPS se limita a los términos

without warranty of any kind by including refurbished Philips

defaced, or (e) product, accessories or consumables sold “AS IS”

QUIÉNES ESTÁN CUBIERTOS:

Philips le garantiza el producto al comprador original o a la per-

product sold “AS IS” by some retailers.

("período de garantía") en el distribuidor autorizado. El recibo de

sona que lo recibe como regalo contra defectos en los materiales

y en la mano de obra, a partir de la fecha de la compra original

This Limited Warranty does not cover:

• Shipping charges to return defective product to Philips.

• Labor charges for installation or setup of the product, adjust-

ventas, donde aparecen el nombre del producto y la fecha de la

compra en un distribuidor autorizado, se considerará compro-

bante de esta fecha.

repair of antenna/signal source systems outside of the product.

ment of customer controls on the product, and installation or

• Product repair and/or part replacement because of improper

utilizables, y que sea al menos funcionalmente equivalente o lo

más parecido al producto original del inventario actual de Philips;

de repuesto nuevas o reacondicionadas; (2) cambiará el producto

por uno nuevo o que se ha fabricado con piezas nuevas o usadas

reclamo válido dentro del período de garantía. A su propia dis-

creción, Philips (1) reparará el producto sin costo, usando piezas

defecto en el material o la mano de obra y Philips recibe un

LO QUE ESTÁ CUBIERTO:

La garantía Philips cubre productos nuevos si se produce algún

for lost data or lost software.

tent for extended periods, product cosmetic appearance items

due to normal wear and tear, unauthorized repair or other

screen markings resulting from viewing fixed stationary con-

cause not within the control of Philips.

supply, power line surge, lightning damage, retained images or

installation or maintenance, connections to improper voltage

returning product to Philips.

• Damage from mishandled shipments or transit accidents when

• Damage or claims for products not being available for use, or

bajo esta garantía contra defectos en

o (3) reembolsará el precio de compra original del producto.

Philips garantiza productos o piezas de repuesto proporcionados

del producto original, lo que le promocione más cobertura.

de obra durante noventa (90) días o por el resto de la garantía

products damaged by these modifications.

it was designed, manufactured, approved and/or authorized, or

repair of

it to operate in any country other than the country for which

• A product that requires modification or adaptation to enable

recibe pasa a ser de su propiedad y el que le entrega a Philips

Cuando se cambia un producto o una pieza, el artículo que usted

(including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt

• A product used for commercial or institutional purposes

reembolso, su producto pasa a ser propiedad de Philips.

pasa a ser propiedad de éste último. Cuando se proporcione un

can be provided.

PUERTO RICO, OR U.S. VIRGIN ISLANDS…

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,

1-888-381-0749

Contact Philips Customer Care Center at:

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

CIONES:

LO QUE NO SE CUBRE: EXCLUSIONES Y LIMITA-

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-

marca registrada, el nombre comercial o por tener el logotipo

dos por Philips o para Philips que se pueden identificar por la

La garantía limitada se aplica sólo a los productos nuevos fabrica-

TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY

EXPRESS OR IMPLIED WARRANTY ON THIS PROD-UCT.

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,

correspondiente. Esta garantía limitada no se aplica a ningún pro-

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT

Los fabricantes, proveedores o editores que no sean Philips

viene empacado con el producto o si se vende junto con éste.

ducto de hardware ni de software que no sea Philips, incluso si

IS LIMITED IN DURATION TO THE DURATION OF THIS

WARRANTY.

mas, datos u otra información almacenados en algún medio con-

Philips no es responsable por ningún daño o pérdida de progra-

productos empacados con el producto Philips.

pueden proporcionar una garantía por separado para sus propios

tal or consequential damages, or allow limitations on how long an

implied warranty lasts, so the above limitations or exclusions may

not apply to you.

Some states do not allow the exclusions or limitation of inciden-

tenido en el producto, ni por ningún producto o pieza que no

Philips que no esté cubierta por esta garantía. La recuperación o

la reinstalación de programas, datos u otra información no está

cubierta por esta garantía limitada.

Esta garantía no se aplica (a) a daños causados por accidente,

abuso, mal uso, negligencia, mala aplicación o a productos que no

sean Philips; (b) a daño provocado por servicio realizado por

Esta garantía le otorga derechos legales específicos. Usted puede tener otros derechos que varían entre los diferentes estados y provincias.

2016

Gibson Innovations USA Inc. PO BOX 100572 Nashville TN 37224

UN (1) AN

accessoire ou produit non durable vendu « TEL QUEL » sans

série de Philips a été supprimé ou défiguré, ou (e) à un produit,

modifié sans la permission écrite de Philips, ou (d) si tout numéro de

• les frais d'expédition pour le renvoi du produit défectueux à

lants.

Cette garantie limitée ne couvre pas:

duits remis à neuf Philips vendu « TEL QUEL » par certains détail-

garantie de quelque description que ce soit par l’inclusion de pro-

MODELO __________________________________________No. DE SERIE________________________

d’une rémanence de l’image

• la réparation du produit et/ou le remplacement des pièces à cause

alimentation électrique incorrecte, d’une surtension temporaire, de

externe au produit.

d'une mauvaise installation ou entretien, d'un raccordement à une

l'installation ou la réparation du système d'antenne/source sonore

produit, le réglage des commandes sur le produit du client ainsi que

Philips.

• les frais de main-d'œuvre pour l'installation ou la configuration du

dommages occasionnés par la foudre,

tique du produit causé par une usure normale, d'une réparation non

naire fixe pour une période de temps prolongée, de l’aspect esthé-

ou de marques à l’écran résultant de l’affichage d’un contenu station-

• tout dommage ou réclamation pour des produits non disponibles à

autorisée ou de toute autre cause non contrôlable par Philips.

l’utilisation ou pour des données perdues ou logiciel perdu.

• tout dommage causé par un mauvais acheminement du produit ou

ou de main d’œuvre à

• un produit nécessitant une modification ou adaptation afin de per-

par un accident encouru lors du renvoi du produit à Philips.

produit endommagé par ces modifications.

• un produit utilisé à des fins commerciales ou institutionnelles (y

mettre l'utilisation dans tout pays autre que celui pour lequel il était

désigné, fabriqué, approuvé et/ou autorisé ou toute réparation du

réception.

compris mais non de façon limitative les fins de location).

• un produit perdu lors de l’expédition sans preuve signée de la

teur.

POUR OBTENIR DE L’AIDE AUX ÉTATS-UNIS, AU

• tout manquement d’exploiter le produit selon le manuel de l’utilisa-

1-888-381-0749

CANADA, À PUERTO RICO OU AUX ÎLES VIERGES

AMÉRICAINES …

LA RÉPARATION OU LE REMPLACEMENT CONFORMÉMENT À

Communiquez avec le centre de service à la clientèle de Philips au:

mayor a 20 días hábiles contados a partir de la fecha de ingreso impresa en la orden de servicio de cualquiera de nuestros centros de servicio

CETTE GARANTIE CONSTITUE LE SEUL REMÈDE POUR LE

CONSOMMATEUR. PHILIPS N’EST AUCUNEMENT RESPONS-

ABLE DE TOUT DOMMAGE ACCESSOIRE OU INDIRECT

RÉSULTANT DE LA VIOLATION DE TOUTE GARANTIE

EXPRESSE OU IMPLICITE SUR CE PRODUIT. SAUF DANS LA

MESURE INTERDITE PAR LES LOIS APPLICABLES, TOUTE

GARANTIE IMPLICITE DE QUALITÉ LOYALE ET MARCHANDE

12 meses.- Barras de sonido, Sistemas de cine en casa, radiograbadoras con y sin reproductor de disco compacto, mini sistemas de audio,

6 meses.- Radio relojes, radios A.M./F.M, batería recargable.

90 días.- Cables y accesorios, controles remotos, antenas de recepción de satélite, bocinas, micrófonos, audífonos.

Certains états ne reconnaissent pas l'exclusion ou la limitation de la

responsabilité pour dommages indirects ou accessoires, ou

autorisent des limitations sur la durée d’une garantie implicite, il est

OU D’UTILITÉ PARTICULIÈRE DU PRODUIT EST LIMITÉE DANS

LE TEMPS À LA DURÉE DE CETTE GARANTIE.

donc possible que les limitations ou exclusions mentionnées ci-

n’est

2016

dessus soient sans effet dans votre cas.

B8_37_Safety_V1.0.indd 5-8 2017/3/1 11:18:25

below.

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth

son receiving the product as a gift against defects in materials and

WHO IS COVERED:

Philips warrants the product to the original purchaser or the per-

from an authorized retailer is considered such proof.

sales receipt showing the product name and the purchase date

workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original

within the Warranty Period. At its option, Philips will either (1)

or workmanship occurs and a valid claim is received by Philips

WHAT IS COVERED:

The Philips warranty covers new products if a defect in material

comparable to the original product in Philips current inventory,

viceable used parts and is at least functionally equivalent or most

replacement parts, or (2) exchange the product with a product

repair the product at no charge, using new or refurbished

that is new or which has been manufactured from new, or ser-

original product’s warranty,

the remaining portion of the

the date of the replacement or repair for ninety (90) days or for

Philips warrants replacement products or parts provided under

this warranty against defects in materials and workmanship from

or (3) refund the original purchase price of the product.

is given, your product becomes Philips’ property.

and the replaced item becomes Philips’ property. When a refund

whichever provides longer coverage for you. When a product or

part is exchanged, any replacement item becomes your property

factured by or for Philips that can be identified by the trademark,

LIMITATIONS:

This Limited Warranty applies only to the new products manu-

WHAT IS NOT COVERED - EXCLUSIONS AND

trade name, or logo affixed to it. This Limited Warranty does not

if packaged or sold with the product. Non-Philips manufacturers,

apply to any non-Philips hardware product or any software, even

data, or other information stored on any media contained within

own products packaged with the bundled product.

Philips is not liable for any damage to or loss of any programs,

suppliers, or publishers may provide a separate warranty for their

this warranty. Recovery or reinstallation of programs, data or

the product, or any non-Philips product or part not covered by

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

to damage caused by service performed by anyone other than

Philips or Philips Authorized Service Location, (c) to a product

abuse, misuse, neglect, misapplication, or non-Philips product, (b)

This warranty does not apply (a) to damage caused by accident,

other information is not covered under this Limited Warranty.

a part that has been modified without the written permission of

CE QUI N’EST PAS COUVERT - EXCLUSIONS ET

Cette garantie vous donne des droits légaux spécifiques. Il est possible que vous bénéficiiez de droits supplémentaires variant d'un État/Province à l'autre.

Gibson Innovations B8 Users manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 Important

Important safety instructions

Care for your product

Care of the environment

Help and support

2 Your product

Main unit

Remote control

Connectors

Wireless subwoofer

3 Connect

Placement

Pair up with the subwoofer

Connect audio from TV

Connect audio from other devices

Connect digital devices through HDMI

Set clock

Dolby Atmos®

Auto standby

Adjust the volume

Choose your sound

Play audio through Bluetooth

Connect Bluetooth via NFC

MP3 player

USB storage devices

Set display brightness

Apply factory settings

Check software version

Update software via USB

6 Wall mount

9 Notice

Notice of compliance