Gibson P-94R, P-94T Wiring Diagram

Gibson Pickup Wiring Diagram

P-94Rand P-94T

WHITE LEAD

BLACK LEAD

The P-94 pickup comes with two insulated lead wires plus a bare wire twisted
with a green lead (note: there may be a red wire included, this is a “dead” lead
which you may cut). Connect either the white or black lead wire to the volume
control and connect the other lead to ground. If you get a thin sound with both
pickups in operation, you may need to change the polarity of the pickup. Simply
reverse the lead wires to do this.

If you are using both the P-94T and P-94R together, use the black lead on one
position, and the white lead for the other. This will give you hum-cancelling
operation when both pickups are in use.

GREEN & BARE

TO GROUND

Gibson Pickup Wiring Diagram

Vintage Style Two Conductor Models

‘57 Classic
‘57 Classic Plus
Angus Young Sig.
BurstBucker

P-90
P-100

TO VOLUME

POT OR

SELECTOR

SWITCH

SHIELD TO

GROUND