Gibson GRT18S6AWV, GRT18S6AWT, GRT18S6AWS, GRT17G4BW9, GRT17G4BW8 Owner’s Manual

Top Mount

Welcome ....................... 2

L

Refrigerator

Safety Instructions ............ 3

installation

Optional ice IVlakerToWater Supply ..... 4 = 5

Door

Removal & Reversal ....... 6 - 7

Features at a Glance ......... 8

Temperature Controls ........ 9

Looking inside .......... 10- 11

ice Service .................... 12

Includes Connecting JO 1n

Food Storage

& Energy Saving Tips ....... 13

Normal Operating Sounds..14

Care & Cleaning ......... 15 - 16

Warranty .................. 17

Espafiol ........... 19

Before You Call ............... 18

READ AND SAVE THESE INSTRUCTIONS P/N24169z_oo(olo_)

Congratulations on your purchase of a new refrigerator! We
here at Electrolux Home Products, Inc. are very proud of
our product and we are completly committed to providing
you with the best service possible. Your satisfaction is our
#1 priority.

Please read this Use & Care Manual very carefully. It contains
valuable information on how to properly maintain your new
refrigerator.

We know you'll enjoy your new refrigerator and ThankYou
for choosing our product. We hope you consider us for future
purchases.

PLEASE READ AND SAVE THESE iNSTRUCTIONS
This Use & Care Manual provides specific operating

instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may
occur. Common sense and caution must be practiced when
installing, operating and maintaining any appliance.

Questions?

1-800-944-9044

(United States)

1-866-213-9397

(Canada)

E×tendYourWarranty Protection

With An

Extended Service Contract

CALL 1=800=944=9044

To Enjoy These Benefits:

Please record your model and serial numbers below for

future reference.This information isfound on your serial

plate located inside the refrigerator compartment.

NOTE: Use only soap and water to clean serial plate.

Model Number:
Serial Number:
Purchase Date:

i i _ i_ iiiiiiiiiiiiiii

o

Total freedom from repair bills so

unexpected repairs won't upset your
budget.

Fast, convenient toll=free service is just
a phone call away.

Top=quality repairs by factory-trained

experts.
Quick access to genuine replacement

parts so you can rest assured your
refrigerator is repaired with the proper

components.

Please attach sales receipt

here for future reference.

Please complete and mail in the Product
Registration Card included with your
refrigerator.

PleaseReadAH nStruct o"sBeforeUs ngTh sRefrigerator'

FOR YOUR SAFETY

• Do not store or use gasoline, or other flammable liquids
in the vicinity ofthis or any other appliance. Read pro-
duct labels for warnings regarding flammability and other

hazards.

• Do not operate the refrigerator in the presense of
explosive fumes.

Avoid contact with any moving parts of automatic ice
maker.

Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.

CHILD SAFETY

Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly

cause suffocation.

These Guidelines MustB e Fo!10wed To Ensure That Safety Mechanisms In This Refrigerator

will 0perate Properly.

PROPER DISPOSAL OF YOUR REFRIGERATOR

OR FREEZER

Risk of child entrapment

Child entrapment and
suffocation are not problems of E

the past. Junked or abondoned
refrigerators or freezers are still
dangerous - even if they will sit
for "just a few days." If you are
getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents.

Before you throw away your old refrigeratorlfreezer:

• Remove doors.

• Leave shelves in place so children may not easily climb

inside.

, Have refrigerant removed by a qualified service

technician.

ELECTRICAL INFORMATION IMPORTANT: Turning the refrigerator temperature

• The refrigerator must be plugged into its own
dedicated 115Volt, 60 Hz.,AC only electric outlet, your reffigeratorfrom cooling, but does not disconnec t

The power cord of the appliance is equipped with a
three-pronggroundingplugforyourprotectionagainst the P0wer t° the !ight bulb and 0ther electrica!

electrical shock hazards. It must be plugged directly components.To turn off power to your refrigerator you
into a properly grounded three-prong receptacle. The must unplug the power cord from the wall outlet,

receptacle must be installed in accordance with local
codes and ordinances. Consult aqualified electrician.

Do not use an extension cord or adapter plug.

Immediately repair or replace any power cord that
becomes frayed or damaged.

Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out

from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by

10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.

• Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.

Avoid connecting refrigerator to a Ground Fault
Interruptor (GFI) circuit.

control to "0" turns off the compressor and prevents

Grounding type

wall receptacle

DOnot, under -_

any circumstances, I
cut, remove, /
or bypass the |

groundin_

PowerCordwith
3-prong grounded plug

ThisUse& CareManualprovidesspecificoperating
instructionsfor yourmodel.Usetherefrigeratoronlyas
instructedinthisUse&CareManual.Beforestartingthe
refrigerator,followtheseimportant first steps.

LOCATION

• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.

• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat

sources.
The refrigerator must be installed on a floor that is level

and strong enough to support afully loaded refrigerator.
Consider water supply availability for models equipped

with an automatic ice maker.

INSTALLATION

Do Not install the refrigerator Where

the temperature wil!drop below 55°F (13tO) or rise above

! !01F (4310).The €0mpressor wi!!not beab! eto maintain

LEVELING

All four corners of your refrigerator must rest firmly on a
solid floor.Your refrigerator is equipped with adjustable front
rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grllle.

p_tu res inside!he refrigerator:

DONot block th e toe grille on the

lower frontof your refrigerator, Sufficient air
circu!atJon is essential for the proper operation of
your refrigerator.

Installation Clearances

• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical

connections:

Sides & Top 3/8"

Back ........................ 1"

NOTE: !f YOUsee black Col!s!tubing Onthe back of your
refrigerator (air, cooled condenser) leave 3"clearance at

top 0f refrigerator.

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge
side against a wall, you may have to allow additional
space so the door can be opened wider.

Your refrigerator should be positioned to allow easy access
to a counter when removing food. To make this possible, the
direction inwhich the doors open can be reversed. See Door
Removal &Reversal Instructions on page 6.

2. Use fiat-blade screwdriver or 3/8" socket wrench
to adjust front rollers.

NOTE: Raise the front of the refrigerator enOUghso the

deers close freely when opened ha!fwaY.The refrigerator

should slope ¼ to V2from front-to,back.Then level the
refrigerator frern side to side

Raise

/rtsta//atiort - Connecting Optional ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the

refrigerator from electrical power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

- Copper tubing is recommended for the water supply line.Water supplytubing made of 1/_,,pJastic is not
recommended since it greatJy increases the potentiaJ for water leaks. Manufacturer will not be responsibJe for
any damage if plastic tubing is used for supply line.

• DO NOT instaJl water su ppJy tubing in areas where temperatures faJl beJow freezing.

- ChemicaJs from a malfunctioning softener can damage the ice maker, if the ice maker is connected to soft

water, ensure that the softener is maintained and working properly.

iMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need

* BasicTools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver
* Access to a household cold water line with water pressure between 30 and t 00 psi.

* A water supply line made of 1Ainch(6.4 ram) OD, copper tubing. Todetermine the length of copper tubing needed,

you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

* A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type

shutoff valve.

* A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

NOTE: water line kit number 5303917950, available from your appliance dealer at additional cost, contains 25 feet (7.6
meters) ef ¼ inch OD copper tubing, a saddle type shutoff valve (n0npiercing), (2) ¼ inch brass compression nuts, (2)

ferrulesisleevesl and instructions for installing a water supply line.

1 1

To Connect Water Supply Line To Ice Maker lnlet Valve

1. Disconnect refrigerator from electric power source.

Plastic Water

2. Place end of water supply line into sink or bucket. Turn ON water supply
and flush supply line until water isclear. Turn OFF water supply at shut

off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,

Brass

Compression

-Ferrule
(Sleeve)

as shown.

5. Push water supply line into water valve inlet as far as it will go (1Ainch).
Slide ferrule (sleeve) into valve inlet and finger tighten compression nut
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

Water Valve

Bracket

6. With steel clamp and screw, secure water supply line to rear panel of
refrigerator as shown.

7. Coil excess water supply line (about 2_/2turns) behind refrigerator as shown
and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that fromhouseholdwat_rsuPply
leak.

9. Reconnect refdgeratortoelectrical powersource. (IncludeenoughtubinginlooptoaUow

10. TOturn ice maker on, lower wire signal arm (see ice maker front cover for ON/ m°vingrefr!gerat°r°utf°r€leaning')
OFF position of arm).

iMPORTANT: Ittakes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may

cause ice maker to cycle two or thre e times before making a ful! tray of ice. New plumbing may cause iceto be discolored

or have poor flavor. Discard ice made during the first 24 hoursl

Door Removal and Reversal instructions

Door Stop
Screw_

Tc

H=nge
Screw

_. Screws_ _ Top Hinge

_ Cover

Cabinet Hole
Plugs

_" bp Hinge

Hinge Hole Handle Hole

Hinge Hole _Handle

Hanale

BottomScrew-'-,ge _ ___ _' Kn,fe

_-Sorew fools _eooNecessar- _ _ qJ. ,_ AdjUSTaDe PUffy

P|u9

P

Screw

Washer

Hinge

/Pin

Center

inge

Hole

lug_

DoorStop / Door
Screw_

Washer

_ Hinge

_Pin

- Bottom

Hinge

P ers

Prll hos

QuQdrex " Socke_ _ _'_

_crewarwer Wrench Set /__J wroncn

DOOR REMOVAL AND REVERSAL iNSTRUCTiONS:
NOTE: The direction in which your refrigerator doors open (door swing)

can be reversed, from left to right or right to left, by moving the door

hinges from one side to the other. Reversing the door swing should be
performed by a qualified person.

iMPORTANT: Before you begin, turn the refrigerator temperature control

to "0" and remove the electrical power cord from the wall outlet. Remove
an'/food from door shelves.

1. Remove toe grille and top hinge cover

2. Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.

3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of bottom hinge and set aside.

5. Remove center hinge and shim by removing inside screw and

loosening two outside screws enough to allow hinge and shim to
slide out. Tighten screws.

6. Loosen two outside screws on opposite side of refrigerator, remove

inside screw and install center hinge.

7. Remove two screws on bottom hinge with 3/8" socket wrench

8. nstall bottom hinge on opposite side with the two screws removed

from step 7.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin

to other hole in hinge and tighten with adjustable wrench.

10. Reverse door handles (see instructions on next page).

11. Move freezer and refrigerator door stops to opposite side.

12. Position refrigerator door onto lower hinge pin and screw center hinge
pin through center hinge into top of door. Close refrigerator door to
help align hinge hole.

13. Tighten center hinge pin with adjustable wrench.

14. Remove cabinet and hinge hole plugs and move to opposite side.

15. Lower freezer door onto center hinge pin.

16. Close freezer door. Have an assistant lift up on opposite side of door
while tightening screws to install top hinge.

17. Replace toe grille and top hinge cover.

18. Plug in electrical power cord and turn refrigerator temperature control
to center oosition. Adjust setting as necessary.

Door Removal and Reversal instructions (continued)

TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.

1. Remove two screws attaching handle to bottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight up
and off of dovetail button

3. Remove screw and dovetail button and install on other side. using the same
holes as nameplate.

4. Magnetic Nameplate Models: Use putty knife togently pry magnetic nameplate
frame from door. Remove nameplate from itsframe, turn frame upside down
and installinold handle holes. Insert magnetic nameplate intoframe.

Self=Adhesive Nameplate Models: Use putty knife to gently peel off name
plate from door and reapply over old handle holes.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over dovetail
button swing handle intoan upright position and pull downward, locking it

intoplace.

2. Secure bottom of handle with two screws removed earlier.

TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)
In some models, the refrigerator door has a full length trim piece which continues from the bottom of the handle to the

bottom of the door. The top of the trim fits around the base of the handle. An adhesive "trim lock" is positioned about
halfway down. The bottom of the trim isheld inplace by either an adhesive trim lock, or a trim lock with two prongs inserted

intoa hole on the face of the door.

SelfAdhesive

Nameplate Nameplate

(somemodels) JFrameq

LockHaodle

"_>:!i,'_' over

Screw-----_ Dovetail Button

TO REMOVE TRIM:

1. Remove trim by gently pulling trim lock areas out and away from door.

2. When trim is free from door, slide the trim straight down and away from base of handle.

NOTE: For models With short handle trim, remove by Sliding trim Straight down and OffOfhandle biacket.

TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to top of refrigerator door.

2. Swing top of handle away from door and slide handle down and off of
dovetail button.

3. Remove screw and dovetail button and install on other side, moving
hole plugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

1. Start with handle offset away from door. Place bottom of handle over
dovetail button, swing handle into an upright position and pull upward,
locking it into place.

2. Secure top of handle with screws.

TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

NOTE: Trim lock must be removed and installed by Sliding 0Vetthe two
donut shaped areas.

Dovetail

i

i

/ /i ¸

Lock Handle

over

Dovetail

:Button

Adhesive

i! ¸

3. install trim to handle by sliding under base of handle. Carefully align
trim and press down at trim lock locations.

4. Use rubbing alcohol to remove any adhesive residue from old trim
lock locations.

Freezer Shelf

-- Freezer Light

F- Fixed Door Bin

Freezer

Control

Refrigerator
Control

Dell Drawer

Cover

Deli Drawer

Half Shelf

Wine Rack

Special Item Rack

Full Shelf

Cris

Crisper
Drawers

F Door Rack

Dairy Door

Tall Bottle

Retainer

Snugger

Door Bin

Fixed Door Bin

_Door Rack

Toe Grille

Features may vary according to model

Temperatum Controls

COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed forat least 8 to t 2 hours before loading

itwith food.
REFRIGERATOR & FREEZER CONTROLS

NOTE:When changing control settings, wait 24 heurs before making additiona! adjustments:

TEMPERATURE ADJUSTMENT

NOTE: When firstturning refrigerator on, move refrigerator
cold control to y which is the recommended initial

setting. After 24 hours, adjust the controls as needed

- Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.

- For colder temperatures, turn the knob towards Colder

- For warmer temperatures, turn the knob towards Cold.

Turning the refrigerator control will change temperatures in both
compartments. For example, ifthe refrigerator control isturned
to a colder setting, the freezer control may have to be adjusted
to a warmer setting. Turning the freezer control will change
only the freezer temperature.

Freezer Control _some models,

Recommended

setting

Tomaintain temperatures, a fan circulates air in the refrigerator
and freezer compartments. For good circulation, do not block

\

cold air vents with food items

Refrigerator Control {some models',

Allow 24 hrs for

0

J

Refrigerator & Freezer Control ,some models,

TEMPERATURE ADJUSTMENT GUIDE

If Refrigerator compartment Is Too Warm Turn Refrigerator Control Slightly Towards Colder.

If Refrigerator compartment Is Too Cold Turn Refrigerator Control Slightly Towards Cold.

If Freezer compartment Is Too Warm Turn Freezer Control Slightly Towards Colder.

If Freezer compartment Is Too Cold Turn Freezer Control Slightly Towards Cold.

* To Turn Refrigerator Off Turn Refrigerator Control To 0.

S

* IMPORTANT: Turning
the refrigerator temp-

erature control to "0"

turns off the com-
pressor, but does not

disconnect the power to
the light bulb and other

electrical components.

To turn off power to your

refrigerator, you must
unplug the power cord

from the wall outlet.

Toavoidperso"a!injuryOrProPerty

damage, handle tempered glass shelves carefully.
Shelves may break suddenly it=nicked, scratched, or

exposed tO sudden temperature change.

SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual

needs. Before adjusting the shelves, remove all food.

To adjust sliding shelves:

O Remove shelf by pulling forward to stop position.

Lift front edge up and pull out.

Replace the shelf on any pair of rails by reversing this
procedure.

Sliding Wire Shelf

SpillFree TM glass shelves (some models) catch and hold

accidental spills. In some models, the SpillFree TM shelves
slide out for easy access to food and for fast cleaning. The
shelves slide out independently of the cantilever brackets.
Just pull the front of the shelf forward. The shelf can be
extended as faras the stopper will allow but it is not removable

from the cantilever bracket.

Cantilever Fixed Glass Shelf

DOOR STORAGE

Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items

can be quickly selected.

Some models have door racks or bins that can accommodate
gallon-sized plastic drink containers and economy-sized jars

and containers. Some racks are adjustable for maximum
storage capacity.

The dairy compartment, which is warmer than the general
food storage section, is intended for short term storage of

cheese, spreads, or butter.

Sliding Glass Shelf

To adjust cantilever shelves:

NOTE: Cantilever Shelves are Supported at the back Of
the refrigerator. Cantilever shelves are available in either

glass or wire.

Lift front edge up.

O Pull shelf out.

Replace the shelf by inserting the hooks at rear of the shelf

into the wall bracket. Lower the shelf into the desired slots
and lock into position.

Door Rack

10

ADJUSTABLEDOOR BiNS

Some models have adjustable door bins that can be moved
to suit individual needs.

Tomove door bins

1. Lift bin straight up.

2. Remove bin.

3. Place bin in desired position.

4. Lower bin onto supports until locked in place.

I

CRISPERS (SOME MODELS)
The crispers, located under the bottom refrigerator shelf,

are designed for storing fruits, vegetables, and other fresh
produce. Wash items inclear water and remove excess water
before placing them inthe crispers. Items with strong odors
or high moisture content should be wrapped before storing.

Crisper Drawer

Adjustable Door Bin

DELl DRAWER (SOME MODELS)
Some models are equipped with a Deli Drawer for storage of

luncheon meats, spreads, cheeses, and other deli items.

Dell Drawer

HUMiDiTY CONTROL (SOME MODELS)

The Humidity Control, present on some models with crisper
drawers, allows you to adjust the humidity within the crisper.
This can extend the life of fresh vegetables that keep best

in high humidity.

NOTE: Leafy vegetables keep best when stored with the
Humidity Control set on High Humidity, or in a drawer

without a Humidity Control, This keeps incoming air to a

minimum and maintains maximum moisture content.

Humidity

" High

11

Crisper Humidity Control

Ice Service

If your refrigerator has an automatic ice maker, it will provide a sufficient
supply el ice for normal use. During the initial startup of your refrigerator.
however, no ice will beproduced during the first 24 hours of operation. Automatic
ice makers are also optional accessories that may be installed in most models
at any time Call your local dealer for information.

The ice maker produces 2 to 5 pounds of ice every 24 hours depending on
usage conditions. Ice is produced at a rate of 8 cubes every 80 to 160 minutes.

TURNING YOUR iCE MAKER ON
After the plumbing connections have been completed, the water supply valve

must be opened. Place the ice container under the ice maker, pushing it as far
back as possible. Lower the wire signal arm to its "down" or ON position. New
plumbing connections may cause the first production of ice cubes to be

discolored or have an odd flavor. These first cubes should be discarded until
the cubes produced are free of discoloration and taste.

TURNING YOUR ICE MAKER OFF
To stop the ice maker, lift the wire signal arm until it clicks and locks in the

"up" or OFF position. The ice maker also turns off automatically when the ice
container is full. If your model has an adjustable freezer shelf, place the shelf
in the lower position, so that the wire signal arm will hit the ice when the

container is full.

ON

Ice Maker

iMPORTANT: Your ice maker is shipped with the wire signal arm in the ON position To ensure proper function Of

your ice maker, hook up water supply immediately or turn ice maker OFF by lifting the wire signal arm until itclicks

and !ocks inthe UP position.

Chemicals froma malfunctioning softener can damage the ice maker' if the ice maker isconnected

to soft water, ensure that the softener is maintained and working properly.

ICE MAKER TIPS

• Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is
in its "down" or ON position. The ice maker will then produce more ice.

• Occasionally shake the ice container to keep ice separated.

• Keep the wire signal arm inits "up" or OFF position until the refrigerator is connected to the water supply or whenever
the water supply isturned off.

• The following sounds are normal when the ice maker isoperating:

• Motor running

• Ice loosening from tray

• Ice dropping into ice container
. Running water

Water valve opening or closing

NOTE: Foi moie infoimation on theSe operationsl See Normai operating Sounds and sightsseotion on page17.

Do Not Place the ice containet in y0ur dishwasher,

• Wash the ice container in warm water with mild detergent. Rinse well and dry.

• Stop the ice maker when cleaning the freezer and during vacations.

• If the ice maker will be turned off for a long period of time, turn the water supply valve to the closed position.

12

FOODSTORAGEIDEAS

Fresh Food Storage

• The fresh food compartment should be kept between 34° F and 40° Fwith an optimum temperature of 37° F.

• Avoid overcrowding the refrigerator shelves. This reduces the circulation of air around the food and results in uneven

cooling.

Fruits and Vegetab/es

• Storage in the crisper drawers traps moisture to help preserve the fruit and vegetable quality for longer time periods.

Meat

• Raw meat and poultry should be wrapped secu rely so leakage and contamination of other foods or surfaces does not

occur.

Frozen Food Storage

• The freezer compartment should be kept at 0° For lower.

• A freezer operates most efficiently when it is at least 2/3 full.

Packaging Foods for Freezing

• To minimize dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags or airtight containers.

Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out,
change color, and develop an off-flavor (freezer burn).

• Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.

• Do not refreeze meat that has completely thawed.

Loading the Freezer

• Avoid adding too much warm food to the freezer at one time. This overloads the freezer, slows the rate of freezing,

and can raise the temperature of frozen foods.
Leave a space between the packages, so cold air can circulate freely, allowing food to freeze as quickly as possible.

• Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves. These foods are

best stored in the freezer interior where the temperature varies less.

ENERGY SAVING IDEAS

- Locate the refrigerator inthe coolest part of the room. out of direct sunlight,
and away from heating ducts or registers. Do not place the refrigerator

next to heat-producing appliances such as a range, oven. or dishwasher.
If this is not possible, asection of cabinetry or an added layer of insulation

between the two appliances will help the refrigerator operate more

efficiently.

(

\

\

\

, Level the refrigerator so that the doors close tightly.

- Refer to this Use & Care Manual for the suggested temperature control
settings.

- Periodic cleaning of the condenser will help the refrigerator run more
efficiently. See the Care and Cleaning Charton page 15.

Do not overcrowd the refrigerator or block cold air vents. Doing so causes
the refrigerator to run longer and use more energy.

Cover foods and wipe containers dry before placing them in the
refrigerator. This cuts down on moisture build-up inside the unit.

Organize the refrigerator to reduce door openings. Remove as many
items as needed at one time and close the door as soon as possible.

13

Normal Operating Sounds &Sights

UNDERSTANDING THE SOUNDS YOU MAY HEAR

Your new high-efficiency refrigerator may make unfamiliar
sounds. These are all normal sounds and soon will become

familiar to you. They also indicate your refrigerator isoperating
as designed. Hard surfaces, such as vinyl or wood floors,
walls, and kitchen cabinets may make sounds more
noticeable. Listed below are descriptions of some of the most
common sounds you may hear, and what is causing them.

NOTE: Rigid foam insulation is very energy efficient,
but is not a sound insulator.

A. Evaporator

The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.

B. Evaporator Fan

You may hear air being forced through the refrigerator
by the evaporator fan.

C. Defrost Heater

During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.

iMpORTANT: During the automatic defrost cycle, you
may notice a red gbwin the vents on the back wa!i of

your freezer compartmenL This is normal during the

defrost cycle,

D. Automatic Ice Maker

If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.

E. Cold Control & Defrost Timer or Automatic

Defrost Control

These parts can produce a snapping or clicking sound
when turning the refrigerator on and off.The timer also
produces sounds similar to an electric clock.

F. Condenser Fan

If condenser coils are located underneath your

refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced

through the condenser by the condenser fan.

G. Compressor

Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.

H. Water Valve

If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.

L Drain Pan (Nonremovable)

You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).

J. Condenser Coils (Fan-cooled models only)

14

Care& Cleaning

Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at
least twice a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any
surface. Do not wash any removable parts ina dishwasher. Always unplug the electricalpower cord from the wall

outlet before cleaning.

- When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may
tear or gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to move the

refrigerator beyond the plumbing connections,

• Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands,

• Never use CHLO RIDE to clean stainless steel.

NOTES:
. Turning the refrigerator temperature control to "0" turns offthe compressor, but does not disconnect electrical

power to the light bulb or other electrical components. Toturn off power to your refrigerator, you must unplug the
power cord from the wall outlet.

• Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue leftfrom tape or labels can be removed with a mixture of warm water and mild
detergent, or. touch the glue residue with the sticky side of tape you have already removed. Do not remove the
serial plate.

Part

Interior/Door
Liner

Door Gaskets
Drawers/Bins
Glass Shelves

Toe Grille

Exterior and

Handles
Exterior and

Handles

(Stainless Steel
Models Only)

Condenser
Coils

(Fan-cooled
models only)

Condenser

Coils
(Air-cooled

models only)
Defrost Water

Pan

Care & Cleaning Chart

What To Use Tips and Precautions

• Soap and water

• Baking soda and water

• Soap and water

• Soap and water

• Soap and water

• Glass cleaner

• Mild liquid sprays

• Soap and water

• Mild liquid sprays

• Vacuum attachment

• Soap and water

• Soap and water

• Ammonia

• Stainless Steel Cleaners

• Condenser Cleaning
Brush is available from

your dealer.

• Vacuum Cleaner

Vacuum Cleaner

• Soap and water

Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls,

light bulb or any electrical part.
Wipe gaskets with a clean soft cloth.
Do not wash any removable items (bins, drawers, etc.) in dishwasher.

Allow glass to warm to room temperature before immersing in warm water.

Vacuum dust from front of toe grille. Remove toe grille (See illustration on
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and

dry.
Do not use commercial household cleaners, ammonia, or alcohol to clean

handles.

Never use CHLORIDE to clean stainless steel.

Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an

ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or

major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain

scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.

No need to clean unless operating refrigerator under particularly dusty or
greasy conditions, or if there is significant pet traffic in your home. If cleaning

is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see

item "J" in illustration on page 14 for location).
Use the dusting tool attachment on your vacuum to remove dust build-up on

the condenser coils (black tubes and wires) attached to the back of air-cooled
refrigerators only.

Some models have defrost water pan located on top of compressor at bottom
rear of refrigerator (see illustration on next page). Wipe water pan with damp

cloth. NOTE: The defrost water pan is NOT removable.

15

NEVERCLEAN CONDENSER(SOMEMODELS)
IfyourrefrigeratorisequippedwithaNeverCleancondenser,

there'snoneedtodeanthecondenserundernormaloperating
conditions.Iftherefrigeratorisoperatedunderparticularly
dustyorgreasyconditions,orifthereissignificantpettraffic
inyourhome,itmaybenecessarytoperiodicallycleanthe
condenserformaximumefficiency.

Defrost
WaterPan---_

weargloves,

REPLACINGTHE FREEZERLIGHT BULB

(SOME MODELS)

1. Unplug refrigerator.

2. Wear gloves as protection against possible broken
glass.

3. Unsnap light shield as shown.

4. Unscrew and replace old bulb with an appliance bulb
of the same wattage.

5. Replace light shield.

6 Remember to plug the refrigerator back in.

Defrost Water Pan, some models,

Short
Vacations

Long

Vacations

Moving

• Leave refrigerator operating during vacations of 3 weeks or less.

• Use all perishable items from refrigerator compartment.

• Turn automatic ice maker off, even if you will only be gone for a few days.

• Remove all food and ice if you will be gone one month or more.

• Turn controls to "0" (the OFF position) and disconnect power.

• Turn off automatic ice maker and turn water supply valve to closed position.

• Clean interior thoroughly.

• Leave both doors open to prevent odors and mold build-up. Block doors open if

necessary.

• Remove all food and ice.

• If using handcart, load from side.

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

Vacation and Moving Tips

16

Yourapplianceiscoveredbyaoneyearlimitedwarranty.Foroneyearfromyouroriginaldateof

purchase,Electroluxwill payallcostsfor repairingorreplacinganypartsofthisappliancethatproveto
bedefectiveinmaterialsor workmanshipwhensuchapplianceisinstalled,usedandmaintainedin

accordancewiththe providedinstructions.

Exclusions

This warranty does not cover the following:

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.

2. Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.

3. Rust on the interior or exterior of the unit.

4. Products purchased "as-is" are not covered by this warranty.

5. Food loss due to any refrigerator or freezer failures.

6. Products used in a commercial setting.

7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.

8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.

9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc.,which are not a part of the appliance when it is shipped from the factory.

10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or
knobs, handles, or other cosmetic parts.

11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.

12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,
cabinets, walls, etc.

13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or

external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR.

ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS
PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN

LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE
DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO

YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.

If You Need Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
Service should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.

Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.

This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances

North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada

Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and

parts under this warranty must be performed by Electrolux or an authorized service company. Product features or

specifications as described or illustrated are subject to change without notice.

USA

1.800.944.9044

Electrolux Major Appliances
North America

P.O. Box 212378

Augusta, GA 30907

Electrolux

Electrolux Canada Corp.

Mississauga, Ontario, Canada

1.800.668.4606

5855 Terry Fox Way

L5V 3E4

17

Canada

ATTENTION

To Properly Install Your Refrigerator

See "installation" Section On Pages 4-5

OR

To Reverse The Doors

See

"'Door Removal & Reversal" Section On Pages 6-7

!i !iii iI _ /ii i iiii _ _ ii _

Before You Carl

Common Before calling for service, review this list. It may save you time and

Occurrences defective workmanship or materials in this appliance.

Refrigerator does not run. breaker.

Freezer temperature too cold. • Set freezer control to a warmer setting until freezer temperature is
Refrigerator temperature is satisfactory. Allow 24 hours for the temperature to stabilize.

satisfactory.
Refrigerator temperature too cold. • Set refrigerator control to a warmer setting. Allow 24 hours for

Freezer temperature is temperature to stabilize. Then check freezer temperatures and adjust
satisfactory, as needed.

* Refrigerator is noisy or vibrates.

expense. This list includes common occurrences that are not the result of

• Ensure plug is tightly pushed into electrical outlet.

• Check/replace fuse with a 15 amp time-delay fuse. Reset circuit

• The temperature control is turned to "O".

• Refrigerator may be in defrost cycle. Wait 20 minutes and check again.

• The cabinet is not level.

• Floor is weak.

Odors in refrigerator.

Cabinet light not working.

Automatic ice maker not working.
(some models)

*See Normal Operating Sounds and Sights section on page 14.

• Interior needs to be cleaned.

• Foods that produce odors should be covered or wrapped.
Replace light bulb,

Ensure plug is tightly pushed into electrical outlet,
Light switch may be stuck. Push in light switch, located on the

refrigerator control box, to release.
Ensure the Wire Signal Arm is not in UP position,

Ice maker should produce 4 to 5 pounds of ice in a 24 hour period.

Water supply is turned off,
Water pressure is too low.
The freezer is not cold enough,

18