Page 1
TM
FORCE
A: How to use Gibson G FORCETM for Standard Tuning
1. Press ON button, 2. Strum once, 3. G-force turns off when done. (all LED’s green and then off)
B: If you want a little more precision (spend a few seconds more). Tune one string at a time.
1. Press and hold ON button until Red E Led is on, 2. Pick the string with the Red LED, pick each string individually until its LED
is green and the tuner goes to the next string, 3. When all six strings are in tune, the tuner turns off. (lights go out)
HERE IS THE REALLY GREAT PART!!
C: If you want to play in a different tuning.
1. Press the ON button two times,
2. Press UP/DOWN to scroll through tuning banks (Red, Green, Blue),
3. Press Left/Right to get to individual tunings,
4. Press Enter – wait until LED’s are Red – strum once (the tuners start working when you press enter),
5. When all six strings are in tune, the tuner turns off (lights go out),
6. The new tuning is now your default. Just do either A or B to get back in tune to the new default tuning.
D: How to get back to standard tuning
1. Press the on button two times, Press Left/Right until red E led is on, Press Enter, strum once
Standard tuning is now the default.
THERE ARE MORE ADVANCED FUNCTIONS BUT THEY NEVER HAVE TO BE USED
www.gibson.com/GForce
Learn More at
Page 2
TM
FORCE
QUICK START GUIDE
www.gibson.com/GForce
Loading...