Giant Alarm System JJ-MB-02-2 User Manual

Giant Alarm System Co., Ltd

Tel: [phone] Fax: [phone]

Web:www.jujiang.net or www.globalsources.com/giant.co or www.jujiang.en.alibaba.com

Page 1 of 3

MotorcycleAlarm System (JJ-MB-02-2)

User’s Manual

Giant Alarm System Co., Ltd

Tel: [phone] Fax: [phone]

Web:www.jujiang.net or www.globalsources.com/giant.co or www.jujiang.en.alibaba.com

Page 2 of 3

Function Key Operation Instruction and Functions

Arm

I. Press to arm the system. (lights flash one time, siren sounds one time then enter the arming

state in 3 seconds.)

II. When robbed in driving, you can press to stop the engine(the distance between you and the

motorcycle should be within 100 meters), then siren will sound loudly, lights keep flashing to frighten
the robber.

Disarm

I. Press to disarm the system/stop the engine.

Siren

I. In driving, press , the light flashes and the siren sounds for 5S to tell the front vehicle that you

would overtake it.

II. When you’re in emergency, press , siren will sound loudly and the lights flash 15S to warn the

villainous.

III. To find out your motorcycle in a large parking lot or in the dark, you may press , then the siren

will sound 2S and the lights keep flashing to indicate its position.

Start

I. In arming state, twice press to start the warming function; if it doesn’t work, repeat the above

operation.

II. In arming state, press , if the engine doesn’t work in 3S, the siren will sound and the system

returns to the arming state.

Adjust Sensibility

＋

Press + at the same time，the siren sounds and the main unit goes into the four-grade shocking
sensibility adjusting----the siren sound one time the sensibility will be in first grade(lowest)… the siren sounds

four times the sensibility will be in four grades(highest).