Gianni Industries Z-600N User Manual

Z-600N Bracket

Typical mounting on IN-SWINGING door

Armature

Frame

Application for the Electromagnet:
GL-1200 series

63.5

5

190

63.5

Z-Bracket

In-Swinging

Door

Minimal:62mm

40

62

190

63.5

8

232

Unit:mm

Installation Steps of Z bracket for In-swinging doors

1

Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.

5

Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.

2

Assemble the Z bracket, and make
sure that the Z bracket is adjustable.

6

Power

Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.

3

Insert the guide pins into the
armature plate.

Finish

Once the position is correct,
use the screws to permanently
mount the Z bracket on the door
frame. This should be the last step.

63.5

4

Put one rubber washer between
armature plate and the Z bracket.

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-Z-600N Ver.C Published on 2008.05.29

The products are manufactured under an ISO
9001 QC 080000 Certified Quality

&

Management Program environment back its
product quality, performance and commitment
to customersatisfaction.