Gianni Industries WPB, WPB-900, WPB-025JS User Manual

WPB Series
Wireless Push Button

Statement

WPB wireless Push Button units which can be applied to distant
access control. WPB series is not only convenient for people who
do not work in the same location constantly that are able to unlock
the door from distance, but also a best choice for the locations
which are difficult to set necessity cables.

WPB-900

WPB-025JS

Specifications

Remote Transmitter

: V battery

Power1. 12
433 KHz transmitting frequency

2.

LED indicator Judge the volume of dry battery at 12V by

3. :

LED's brightness.

Transmitting distance for the antenna Max. 50 ~ 60 M

4. :

Embedded modules: Hopping Code IC

5.

The Lowest voltage Not under 6.28V for the battery of

6. :

remote transmitter

RF Hopping Code Controller

Power DC12~24V

1. :

Output contact: SPDT rated 3A@12V DC dry contact

2.

Buzzer indicator The receiver will alarm from the internal

3. :

buzzer as a signal of low-battery which is under DC9.2V.

LED indicator:

4.

Green LED: Power
Red LED: Receive & input

Timer setting 1, 3, 5, 10 seconds

5. :

The quantity of saving remote transmitter 6 pcs

6. :

Application

Dimension

40

130

115

130

Remote Transmitter

GIANNI INDUSTRIES, INC.

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]

E-Mail: [e-mail]
Website: gianni.tw

Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-WPB Ver. C Published on2008.07.07

83

62

Unit:mm

Warranty

The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.

The products are manufactured under an ISO
9001 QC 080000 Certified Quality

&

Management Program environment back its
product quality, performance and commitment
to customersatisfaction.